Bright and Colourful Parlee (big pictures)
Moderators: MrCurrieinahurry, maxim809, Moderator Team
- The Spider
- Posts: 392
- Joined: Thu Jun 08, 2006 10:57 am
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Come on, you can do better than that ! The pics are way to small and dark. I wanna see a close up of the bike cos it's not everyday you see Dura Ace cranks with Record Shifters on the same bike
For if life, in the desire for which our essence and existence consists, possessed in itself a positive value and real content, there would be no such thing as boredom: mere existence would fufill and satisfy us.
Arthur Schopenhauer
Arthur Schopenhauer
- The Spider
- Posts: 392
- Joined: Thu Jun 08, 2006 10:57 am
-
- Posts: 3635
- Joined: Sat Apr 01, 2006 12:17 am
- Location: A bigger rock in the Pacific (AUS)
Spider, I've got to say, when do you ride? (As I've never seen a Parlee around before - that said I'm usually not looking for them in melbourne )
And you can always upload the photos onto some photohosting site (someone will have a recomendation) and have the photos as links so people can see the full photo
And you can always upload the photos onto some photohosting site (someone will have a recomendation) and have the photos as links so people can see the full photo
- The Spider
- Posts: 392
- Joined: Thu Jun 08, 2006 10:57 am
Skillgannon,
The Parlee is used on weekends...trips out to Dandy or Kinglake or Mornington.
The Pegoretti is used for weekday (thursday / tuesday) training....doncaster or Kew boulevard hill repeats (Yarra Street).
The Indy Fab is used for commuting into work (Carlton)
and the Santa Cruz Blur is used...rarely...but in the countryor Lysterfield!
so you've probably seen me....but just not on this...it is 3 years old however....and the decals are very difficult to see...
The Parlee is used on weekends...trips out to Dandy or Kinglake or Mornington.
The Pegoretti is used for weekday (thursday / tuesday) training....doncaster or Kew boulevard hill repeats (Yarra Street).
The Indy Fab is used for commuting into work (Carlton)
and the Santa Cruz Blur is used...rarely...but in the countryor Lysterfield!
so you've probably seen me....but just not on this...it is 3 years old however....and the decals are very difficult to see...
Last edited by The Spider on Sat May 05, 2007 5:56 am, edited 1 time in total.
- bike_add1ct
- Posts: 408
- Joined: Mon Sep 26, 2005 4:29 pm
- Location: The Lowlands
Damn, another Parlee... Parlee isn't becoming the new Trek I hope?
J/k, marvelous bike Spider! Only comment I have is... need! bigger! pics!
J/k, marvelous bike Spider! Only comment I have is... need! bigger! pics!
The Spider wrote:I'm keeping the photos as JPEGS and then scaling them back to 128k limit, keeping the 16 million colours...
I noticed that mine is smaller than the other boys...
bit embarrassing
what should I drop to get the size bigger? pixle size?
If you send me the pics (high rez version), I'll host them so you can post bigger pics. Just send them in an email and I'll take care of the rest.
-Eric
-Eric
bike_add1ct wrote:Damn, another Parlee... Parlee isn't becoming the new Trek I hope?
Since Parlee only makes 30 or so a month, and all by hand, I don't think there is much risk of that. You see more here on ww than you'll ever see on the street.
- bike_add1ct
- Posts: 408
- Joined: Mon Sep 26, 2005 4:29 pm
- Location: The Lowlands
dj97223 wrote:bike_add1ct wrote:Damn, another Parlee... Parlee isn't becoming the new Trek I hope?
Since Parlee only makes 30 or so a month, and all by hand, I don't think there is much risk of that. You see more here on ww than you'll ever see on the street.
No doubt. I've never seen a Parlee IRL on this side of the puddle...
- The Spider
- Posts: 392
- Joined: Thu Jun 08, 2006 10:57 am
When I bought mine in 03 it was the first and only in Australia....
still was as of last year...according to Jonathan.
they got me to met with a prospective customer...he told me he had $3 in his bank account...I told him they cost a bit more than that!
still was as of last year...according to Jonathan.
they got me to met with a prospective customer...he told me he had $3 in his bank account...I told him they cost a bit more than that!
- The Spider
- Posts: 392
- Joined: Thu Jun 08, 2006 10:57 am
Just got back from the mechanic and have 'weenied' the front of the bike with ti base plate, hockey tape and carbon clamps. Dropped 64 grams.
2007 = it's onto the middle with a new seatpost and clamp...
anyone got any ideas where else I should concentrate to tune this bike further?
2007 = it's onto the middle with a new seatpost and clamp...
anyone got any ideas where else I should concentrate to tune this bike further?
nice work so far!
How stuck on the Dura-Ace cranks are you? You could go some carbon cranks which will radically change the look of the bike. Or just go for some carbon rings?
What about a carbon saddle? Have you found the New Ultimate post?
There is a few more BTP items to get as well.
I have seen you on the Pegoretti in Camberwell a couple of months back, and did a double take whilst driving past! Do you do the Hills ride on thursday's? Hopefully i will get to see the spider parlee soon.
How stuck on the Dura-Ace cranks are you? You could go some carbon cranks which will radically change the look of the bike. Or just go for some carbon rings?
What about a carbon saddle? Have you found the New Ultimate post?
There is a few more BTP items to get as well.
I have seen you on the Pegoretti in Camberwell a couple of months back, and did a double take whilst driving past! Do you do the Hills ride on thursday's? Hopefully i will get to see the spider parlee soon.
- The Spider
- Posts: 392
- Joined: Thu Jun 08, 2006 10:57 am
Thanks 1in20!
New Ultimate has been ordered and paid for, should be arriving any day and Jesper will help with BTP seatclamp and nokon carbon outers in March.
The Shimano DA cranks are moving to another project this year. Always dreamt of THM claviculas to go with the forks but they wont make them in 180mm (sure they'll make a downhill mtb version for the show but...) and reports seem to be favorable over the Campy Ultra (can be had in 180mm if you sleep with the wrong people etc).
carbon saddle: well I've just put a Fizik Arione (ti rail) on the Pegoretti, so if that agrees with me perhaps the k1....if not...i'll stick with the flite TT.
I do that Thursday route as training on Tuesday mornings. Drop me a line if your available one week. Depending on your bike we also throw some light CX work into the route!
New Ultimate has been ordered and paid for, should be arriving any day and Jesper will help with BTP seatclamp and nokon carbon outers in March.
The Shimano DA cranks are moving to another project this year. Always dreamt of THM claviculas to go with the forks but they wont make them in 180mm (sure they'll make a downhill mtb version for the show but...) and reports seem to be favorable over the Campy Ultra (can be had in 180mm if you sleep with the wrong people etc).
carbon saddle: well I've just put a Fizik Arione (ti rail) on the Pegoretti, so if that agrees with me perhaps the k1....if not...i'll stick with the flite TT.
I do that Thursday route as training on Tuesday mornings. Drop me a line if your available one week. Depending on your bike we also throw some light CX work into the route!
- The Spider
- Posts: 392
- Joined: Thu Jun 08, 2006 10:57 am
New Ultimate seatpost arrived and installed. 350 x 31.6mm 144g.
saved 100g off the trimmed down campagnolo and matches the look of the bike.
The seatpost is beautiful. highly recommended. of course I should probably ensure that it keeps the seat up!
saved 100g off the trimmed down campagnolo and matches the look of the bike.
The seatpost is beautiful. highly recommended. of course I should probably ensure that it keeps the seat up!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com