Ti bolt For Campy Seat Post Clamp
Moderator: robbosmans
Okay I admit it I'm lazy... I have a Campy seatpost binder and I'm looking for a TI bolt for it. Can anyone tell me what size I'll need?
Thanks in advanced.
Thanks in advanced.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 7
- Joined: Thu Jun 10, 2004 3:27 pm
- Location: Australia
M6 X 1mm Pitch X 20mm long, and the diameter of the head needs to around 9.5mm or there may be some clearance issues in the counterbore of the clamp.
Thanks Carltontwin! I'll see if I can source a Ti bolt for it.
I could not find Ti bolts with the slightly smaller head size needed so I carefully chucked the bolt into a drill press and as it spun around sanded the head to the slightly smaller size. Not removing much - just "enough"
- asphaltdude
- Posts: 1231
- Joined: Tue Aug 12, 2003 8:39 pm
- Location: Holland
- Contact:
Sneeze twice before every ride and you'll save the same amount of weight for free
Whow! That's a pretty damn nice garage door!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
asphaltdude wrote:Sneeze twice before every ride and you'll save the same amount of weight for free
I only have one bolt left that is not Alum or Ti on my bike. I've gone this far so no turning back for this WW.