Ti bolt For Campy Seat Post Clamp
Moderator: robbosmans
Okay I admit it I'm lazy... I have a Campy seatpost binder and I'm looking for a TI bolt for it. Can anyone tell me what size I'll need?
Thanks in advanced.
Thanks in advanced.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 7
- Joined: Thu Jun 10, 2004 3:27 pm
- Location: Australia
M6 X 1mm Pitch X 20mm long, and the diameter of the head needs to around 9.5mm or there may be some clearance issues in the counterbore of the clamp.
Thanks Carltontwin! I'll see if I can source a Ti bolt for it.
I could not find Ti bolts with the slightly smaller head size needed so I carefully chucked the bolt into a drill press and as it spun around sanded the head to the slightly smaller size. Not removing much - just "enough"
- asphaltdude
- Posts: 1231
- Joined: Tue Aug 12, 2003 8:39 pm
- Location: Holland
- Contact:
Sneeze twice before every ride and you'll save the same amount of weight for free
Whow! That's a pretty damn nice garage door!
asphaltdude wrote:Sneeze twice before every ride and you'll save the same amount of weight for free
I only have one bolt left that is not Alum or Ti on my bike. I've gone this far so no turning back for this WW.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com