Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Fri Sep 30, 2016 4:38 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Wheels and more
PostPosted: Tue Apr 13, 2004 8:16 pm 
Offline

Joined: Tue Apr 13, 2004 10:02 am
Posts: 98
I just bought a new bike (TCR Composite 2) and am a little dissatisfied with the Shimano R540 wheels (~1900g I think). I'm not aiming for an insanely light bike as my budget doesn't really permit it since I'm a high school student saving up for college, but I am interested in losing the most weight with the least amount of cost. Since the wheels are probably one of the most noticeable places I can shave weight off I was considering getting a lighter set and selling off the R540's. Ideally I'd prefer if it was pretty serviceable, durable, and able to be used as an everyday wheel as well.

I have no idea if these weights are accurate (I suspect not) but give or take a few grams and it should be somewhere near there.

Front Wheel:
Chris King Hub Road Front Black 28 Hole 112g
Ritchey Rim Aero Pro Front Black 28 Hole 395g
Revolution spokes, 3 cross lacing 140g
Black alloy nipples 10g

Rear wheel :
Chris King Hub Road Rear Black 32 Hole 263g
Ritchey Rim Aero Pro Front Black 32 Hole 395g
Drive side Revolution spokes, 80g
Non-drive side Revolution spokes, 3 cross lacing 80g
Black alloy nipples 10g

Total: ~1485g

I can have the set built up for $500 even, but I'm wondering if you have any other recommendations for spokes, hubs, rims, etc. that could save weight, still be durable, and remain around the $500.

One more question, the TCR came with a carbon fork with an alloy steerer. Does anyone have any information regarding the weight of this? Thanks.


Top
   
 Post subject:
PostPosted: Tue Apr 13, 2004 8:51 pm 
Offline
User avatar

Joined: Thu Apr 08, 2004 8:43 pm
Posts: 644
id go 2 cross on the front wheel. it looks sexy.

i have hugi 240 (coda branded) hubs laced 2 cross front and rear using 1.8/1.5 revolution spokes with alloy nipples and have had no problems with them (then again i laced them up :D )

kings will last forever. and they roll very smoothly and are very service able. i say go for it.

sell your wheels on ebay before you get too many miles on them.


Top
   
 Post subject:
Posted: Tue Apr 13, 2004 8:51 pm 


Top
   
 
 Post subject:
PostPosted: Tue Apr 13, 2004 9:04 pm 
Offline

Joined: Thu Jan 08, 2004 10:11 pm
Posts: 786
There are hubs that are lighter, cheaper and more quiet than Kings... They may be durable, but the make a very annoying sound when freewheeling... Some people may argue that this sound is like music to the ears, but I for one was very irritated by it when one of our customers let me take a spin on his bike... I can't imagine racing with these... I would be embarrased to just sit in someone's wheel and coast along...

I'ld go for a pair of Hugi240 hubs, with a pair of Open Pro rims... spokes would be CX rays crossed 2...


Top
   
 Post subject:
PostPosted: Tue Apr 13, 2004 11:58 pm 
Offline
User avatar

Joined: Mon Sep 30, 2002 1:59 am
Posts: 1386
Location: Sydney, Australia
Try the following thread.http://weightweenies.starbike.com/forum/viewtopic.php?p=12618#12618

I know there not the cheapest wheelsets, but any from that list would be a weight advantage.


Brian


Top
   
 Post subject:
PostPosted: Wed Apr 14, 2004 7:19 am 
Offline

Joined: Tue Apr 13, 2004 10:02 am
Posts: 98
Oswald wrote:
There are hubs that are lighter, cheaper and more quiet than Kings... They may be durable, but the make a very annoying sound when freewheeling... Some people may argue that this sound is like music to the ears, but I for one was very irritated by it when one of our customers let me take a spin on his bike... I can't imagine racing with these... I would be embarrased to just sit in someone's wheel and coast along...

I'ld go for a pair of Hugi240 hubs, with a pair of Open Pro rims... spokes would be CX rays crossed 2...


The Hugi's would definitely be an option. Is there something they posess or feature that the King's don't that would be beneficial (aside from noise). As for the CX Ray spokes, I've heard these mentioned quite a bit but I haven't heard anything about why they're so good. The builder I would be using doesn't carry these, so unless there is something significantly better about them I may have to pass them up. Any reason for the Open Pro's over the Ritchey's or IRD Cadence Road?

To Bruiser: I've looked at that list quite a bit and the only ones that really fit my price range are the Speed Dream R359 and Aerolite and the American Classic 350's all of which concern me a little about ther ability to be everyday wheels rather than racing.


Top
   
 Post subject:
PostPosted: Wed Apr 14, 2004 7:23 am 
Offline
User avatar

Joined: Mon Sep 30, 2002 1:59 am
Posts: 1386
Location: Sydney, Australia
There is a definite trade off between weight and strength, I would suggest saving up until you can afford a modest set of wheels for racing and a cheap everyday set.

Have you looked at your tyres to lose weight?

Brian


Top
   
 Post subject:
PostPosted: Wed Apr 14, 2004 8:56 am 
Offline
User avatar

Joined: Sun Dec 14, 2003 1:52 am
Posts: 1623
BigFloppyLlama wrote:
[snip]
To Bruiser: I've looked at that list quite a bit and the only ones that really fit my price range are the Speed Dream R359 and Aerolite and the American Classic 350's all of which concern me a little about ther ability to be everyday wheels rather than racing.

BFL, if you're choosing between those 3 wheels, I would recommend the AeroLite. I have a set weigh, 190# or so, use every day, and they're very strong, stiff, stay true, fast. I've seen AC-350's not perform well, and the R359 is Dave Thomas' version of it, perhaps better, certainly better QC, but I've never actually tried it.
The AeroLite uses a Velocity (Bruiser will like that) Fusion (30mm) rim; White Industries road hub front, mtb hub rear for flange strength, Sapim CX-Ray spokes. They are laced very tight.
The strongest of those is certainly the AeroLite, and you can tell him exactly what you need, the R359 and AeroLites are custom made for you, the AC350's are not. You have to call him, though, no email. All the guy does is build wheels, nothing else. Worth a call at least....Good luck!
http://www.speeddream.com/road.php

_________________
"Gimondi รจ un eroe umano, che viene sconfitto ma che continua la sua corsa fino a tornare a vincere." - Enrico Ruggeri


Top
   
 Post subject:
Posted: Wed Apr 14, 2004 8:56 am 


Top
   
 
 Post subject:
PostPosted: Wed Apr 14, 2004 10:12 am 
Offline

Joined: Tue Apr 13, 2004 10:02 am
Posts: 98
Bruiser wrote:
There is a definite trade off between weight and strength, I would suggest saving up until you can afford a modest set of wheels for racing and a cheap everyday set.

Have you looked at your tyres to lose weight?

Brian


I think that it would be the ideal situation to have two wheelsets, but as I'm heading into collge I have a few other expenses that will need to be considered as well.

Right now I'm running Pro Races (700Cx20) and Performance Lunarlite tubes so I don't think I can take too much off of them without going for tubulars.

I may ask my local shop to try a few wheels and decide if the weight savings is worth the additional cost.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Carbon Frame & AL Wheels Vs Quality AL Frame & Carbon Wheels

in Road

jeffy

13

1369

Wed May 04, 2016 4:33 pm

KimJaeCheon View the latest post

There are no new unread posts for this topic. How many wheels do you have per bike?

[ Go to page: 1 2 3 4 ]

in Road

skiezo

48

2459

Thu Feb 18, 2016 2:39 am

FMB51 View the latest post

There are no new unread posts for this topic. Zipp 303 or 404 for Do-it-All Wheels

[ Go to page: 1 2 3 4 ]

in Road

ryanw

56

4892

Wed Jun 08, 2016 1:15 pm

Odonata View the latest post

There are no new unread posts for this topic. 77 Composites wheels

in Road

liam7020

2

389

Fri Jun 03, 2016 12:53 am

Akennelly View the latest post

There are no new unread posts for this topic. New wheels for new bike!

in Road

ardennes777

7

936

Thu Apr 07, 2016 2:54 pm

wangsanegara View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Google [Bot], MSNbot Media, Yahoo [Bot] and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited