Litespeed T3
Moderators: MrCurrieinahurry, maxim809, Moderator Team
-
- Posts: 12
- Joined: Thu May 08, 2014 7:26 am
Hi everybody,
Here's my new build for the next seasons. Not so much details on this Litespeed T3 on the internet, so it could interest some of you
Frame: Litespeed T3 size ML
Fork: Enve 1.0 - 230mm straight steerer (probably 210mm once position approved)
Headset: Chris King Inset 7
Spacers: 5mm carbon
Seatpost clamp: Generic Litespeed > Carbonice to come
Seatpost: New Ultimate Alu - 0 setback
Seat: Tune Speedneedle Marathon black leather
Stem: Extralite Roadstem - 90mm
Top cap: Chris King
Expander bolt: Tune Gum Gum/CK Bolt
Bar: Ritchey Logic WCS alu > probably changed soon
Bartape: Prologo black leather
Bottle cage: King Cage Isis/ti bolts
Outer cables: Campagnolo
Inner cables: Campagnolo
Brakes: EeCycleWorks EeBrakes
Brake pads: Swissstop Flash Pro Yellow
Front derailleur: Campagnolo Record 2x10s
Rear derailleur: Campagnolo Record 2x10s/K-Edge clamp > Carbonice to come
Crankset: Campagnolo Record 2x10s - 172.5mm Compact
Bottom Bracket: Campagnolo Ultratorque PF30
Chain: Campagnolo Centaur > KMC 10SL to come
Shifters: Campagnolo Record 2x10s
Cassette: Dura Ace 7900 11-25
Wheels: Enve SES 3.4 tubular/Enve Classic 25 tubular
Hubs: Chris King R45 mango - Shimano 10s body
Spokes: Dt Aerolite 24/20
Wheel skewers: Tune DC 14
Tubes: Maxxis Forza 700x23
Pedals: Speedplay Zero
Complete Gallery : https://www.flickr.com/photos/66981444@ ... 899602753/
More to come...
Have a nice ride!
Here's my new build for the next seasons. Not so much details on this Litespeed T3 on the internet, so it could interest some of you
Frame: Litespeed T3 size ML
Fork: Enve 1.0 - 230mm straight steerer (probably 210mm once position approved)
Headset: Chris King Inset 7
Spacers: 5mm carbon
Seatpost clamp: Generic Litespeed > Carbonice to come
Seatpost: New Ultimate Alu - 0 setback
Seat: Tune Speedneedle Marathon black leather
Stem: Extralite Roadstem - 90mm
Top cap: Chris King
Expander bolt: Tune Gum Gum/CK Bolt
Bar: Ritchey Logic WCS alu > probably changed soon
Bartape: Prologo black leather
Bottle cage: King Cage Isis/ti bolts
Outer cables: Campagnolo
Inner cables: Campagnolo
Brakes: EeCycleWorks EeBrakes
Brake pads: Swissstop Flash Pro Yellow
Front derailleur: Campagnolo Record 2x10s
Rear derailleur: Campagnolo Record 2x10s/K-Edge clamp > Carbonice to come
Crankset: Campagnolo Record 2x10s - 172.5mm Compact
Bottom Bracket: Campagnolo Ultratorque PF30
Chain: Campagnolo Centaur > KMC 10SL to come
Shifters: Campagnolo Record 2x10s
Cassette: Dura Ace 7900 11-25
Wheels: Enve SES 3.4 tubular/Enve Classic 25 tubular
Hubs: Chris King R45 mango - Shimano 10s body
Spokes: Dt Aerolite 24/20
Wheel skewers: Tune DC 14
Tubes: Maxxis Forza 700x23
Pedals: Speedplay Zero
Complete Gallery : https://www.flickr.com/photos/66981444@ ... 899602753/
More to come...
Have a nice ride!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 12
- Joined: Thu May 08, 2014 7:26 am
I do rather have an external low cup and no ring under my stem. The Inset 1 is an internal headset
I also wanted to keep my actual straight fork, and not have to change the headset if I get a tapered fork in the future.
Plus, the CK headsets are so beautiful that I wanted it to be visible.
I also wanted to keep my actual straight fork, and not have to change the headset if I get a tapered fork in the future.
Plus, the CK headsets are so beautiful that I wanted it to be visible.
-
- Posts: 12
- Joined: Thu May 08, 2014 7:26 am
Right, there's almost no information, test, reviews on the internet about these new frames since 2013 (T1, T3, T5,...).
I don't know why!
I haven't ridden this bike so much, but all I can say is that it's stiff, efficient, sharp,...The welds are beautiful, i love this "handmade" finish. (Ok, not as beautiful as Moots, Eriksen, Firefly,...).
The frame, size ML, is 1363gr without seat clamp.
Very satisfied with this build, which is 6,6kg with the Enve Classic 25. Some changes to come, stay tuned
I don't know why!
I haven't ridden this bike so much, but all I can say is that it's stiff, efficient, sharp,...The welds are beautiful, i love this "handmade" finish. (Ok, not as beautiful as Moots, Eriksen, Firefly,...).
The frame, size ML, is 1363gr without seat clamp.
Very satisfied with this build, which is 6,6kg with the Enve Classic 25. Some changes to come, stay tuned
-
- Posts: 11
- Joined: Mon Aug 18, 2014 9:43 pm
Nice looking sticker upgrade.
Have you gotten some miles on the bike? How does it ride?
Do you have your build?
Have you gotten some miles on the bike? How does it ride?
Do you have your build?
anquetil wrote:Masterpiou your bike is amazing!
I own Ghisallo few years ago but it was too flexy(only 800 g frame).
Amd3rd, super frame but too much red colour(chainring & seat clamp), but bike is yours.
Nice ride to both!
Thanks I just love Black and Red
It is really nice. Is it possible to remove the enve stickers or replace them with black?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com