Lighter tubes? Noticeable?
Moderator: robbosmans
-
- Posts: 1736
- Joined: Tue Sep 22, 2009 1:29 pm
- Location: Paris
Been running conti supersonic tube for 6 years ish, can't say I've had more than a couple of punctures a year and they have the benefit of not having to pump them up every day like latex tubes. Cheapest wieght saving you can make, with no discernable downsides.
note: this is running veloflex corsa 23 tyres.
note: this is running veloflex corsa 23 tyres.
"We live in an age when unnecessary things are our only necessities." Oscar Wilde
-
- Posts: 195
- Joined: Tue Jan 14, 2014 1:00 am
I bought two Supersonic tubes from ebay and got multiple holes in the rubber around the valve. Based on what others are saying they were obviously from a bad batch, but I'm wary of them now. Using Panaracer R'Air tubes instead as they've always been rock solid for me.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Thank you for all the input!
So plus and minus points here for both.
Latex tubes have a lower RR than Supersonics. I always check and pump my tyres before each ride without fail, so doesn't really bother me.
I guess it depends is there more performance increase from lower RR of latex or light weight of the
Supersonics?
Thanks
Luke
So plus and minus points here for both.
Latex tubes have a lower RR than Supersonics. I always check and pump my tyres before each ride without fail, so doesn't really bother me.
I guess it depends is there more performance increase from lower RR of latex or light weight of the
Supersonics?
Thanks
Luke
On a really heavy bike 50-100g saved by going to lighter tubes won't make a massive difference, but most of these bikes have heavy tires, so swapping to lighter tyres and tubes can save you 250-300g which should be noticeable, as well as offer lower rolling resistance.
Parlee Z5, Trek Madone, Colnago Dream,
Parlee Z5, Trek Madone, Colnago Dream,
Ozrider - Western Australia
Parlee Z5 XL (6055g/13.32lbs) Trek Madone 5.9 (7052-7500g)Jonesman Columbus Spirit (8680g)
Chase your dreams - it's only impossible until it's done
Parlee Z5 XL (6055g/13.32lbs) Trek Madone 5.9 (7052-7500g)Jonesman Columbus Spirit (8680g)
Chase your dreams - it's only impossible until it's done
-
- Posts: 1163
- Joined: Sun May 16, 2010 7:28 pm
If a thorns going through your tire, it's also going through your tube. 0.2mm of extra butyl rubber is not going to make a difference.
I have heard there may be a higher prevalence of tubes flat out of the box though, but that could be an urban legend.
I have heard there may be a higher prevalence of tubes flat out of the box though, but that could be an urban legend.
I guess if a stone is sharp enought to go all the way through the tyre itself, then like has been said, no chance any innertubes is going to take the hit either.
So with my Ultremo tyres, added with the latex tubes I am not going to benefit? As I thought the Ultermo ZX tyres are one of the lightest and low RR?
Luke
So with my Ultremo tyres, added with the latex tubes I am not going to benefit? As I thought the Ultermo ZX tyres are one of the lightest and low RR?
Luke
The other benefit of supersonics is they take up less space. I can fit two of them in my saddle bag in the space one generic tube takes up, and for the same weight.
As for a greater incidence of flats: I haven't noticed a big difference in normal punctures, but they definitely will push out of a cut in the tire easier, and abrade through much more easily in the case of something rubbing inside the tire, such as a tire boot.
As for a greater incidence of flats: I haven't noticed a big difference in normal punctures, but they definitely will push out of a cut in the tire easier, and abrade through much more easily in the case of something rubbing inside the tire, such as a tire boot.
You know PLuKE, there are a lot of pros and cons to latex v. butyl. Rolling resistance will be better with latex no matter what tire you have, this is known quantity. The ride will be slightly more comfy and the latex will be more resistant to pinch flats. You should care a butyl spare though if you do get a small cut in your tire that doesn't actually puncture your tube the latex can squeeze out and pop where the butyl will be tougher in that instance. The butyl will be easier to mount on the side of the road as well.
Huh? I've patched latex tubes with standard Rema patches.
Personally, I gave up on the latex tubes. I liked the idea but I couldn't feel any difference and I got tired of pumping up my tires for every single ride.
I get the Michelin Airstop tubes because they have smooth presta valves which make a much better seal on my Silca track pump. They weigh 10 grams more than the Michelin latex. I just weighed two 94g vs 84g (latex).
Personally, I gave up on the latex tubes. I liked the idea but I couldn't feel any difference and I got tired of pumping up my tires for every single ride.
I get the Michelin Airstop tubes because they have smooth presta valves which make a much better seal on my Silca track pump. They weigh 10 grams more than the Michelin latex. I just weighed two 94g vs 84g (latex).
PLuKE wrote:I would of thought weight would make the most noticeable difference in performance although small, how does Latex give a lower rolling restistence?
Butyl absorbs a lot of energy when it flexes. Latex absorbs approximately none. That's why they use it for spearguns and slingshots.
The difference is fairly substantial. If you are racing and care about the details, latex is a must.
formerly rruff...