Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Wed Sep 28, 2016 11:18 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Fri Jul 18, 2014 2:39 pm 
Offline

Joined: Mon Jan 21, 2008 12:09 pm
Posts: 2643
I noticed some play in my rear wheel after a short ride yesterday. I thought, perhaps, the hub bearings were failing or that the cassette body had come loose. When I began removing the SRAM Red Powerdome cassette, it came apart into its three component pieces... machined cogs, inner sleeve, and back plate. The cassette had basically separated on the freehub. This was what was causing the play in my drivetrain. While I have owned the cassette for 2 years, it is not ridden daily... perhaps 2 or 3 times per week at most (I have multiple bikes). I'm really disappointed as this what not an inexpensive part.

Is this why these cassettes were discontinued?


Top
   
PostPosted: Fri Jul 18, 2014 3:04 pm 
Offline
Administrator
User avatar

Joined: Mon Jun 02, 2003 8:17 am
Posts: 6365
Location: Drenthe, Holland
Hi Ted,

I moved this from Chat to Road. as this is about a road part.
From an inside source I understood that the backplate of the first gen powerdome cassettes could come loose. You can try to claim this at sram through your LBS. Or you can repair it with some epoxy like i did. Just glue the back plate back on.

cheers,

_________________
Quote:
'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'


Top
   
Posted: Fri Jul 18, 2014 3:04 pm 


Top
   
 
PostPosted: Fri Jul 18, 2014 3:53 pm 
Offline

Joined: Wed Feb 16, 2011 7:46 pm
Posts: 187
pics?


Top
   
PostPosted: Fri Jul 18, 2014 6:11 pm 
Offline

Joined: Mon Jan 21, 2008 12:09 pm
Posts: 2643
I believe the back plate may be bent....

Image


Top
   
PostPosted: Fri Jul 18, 2014 7:17 pm 
Offline
Administrator
User avatar

Joined: Mon Jun 02, 2003 8:17 am
Posts: 6365
Location: Drenthe, Holland
Scratch most of the old glue away and smear epoxy all around the edges of the cassette. Place the center ring and put the back plate back on. Cover it with a metal plate or a piece of wood and use a vice to clamp it while it dries.
That way the bent back plate will be perfectly fixed on the cassette ;)

And, who uses a 11-26 cassette in northern Holland?

_________________
Quote:
'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'


Top
   
PostPosted: Fri Jul 18, 2014 9:07 pm 
Offline

Joined: Mon Jan 21, 2008 12:09 pm
Posts: 2643
I'll try it. I run what I brung... hahaha


Top
   
PostPosted: Sat Jul 19, 2014 1:41 pm 
Offline

Joined: Sat Dec 13, 2003 2:25 am
Posts: 4764
Location: Canada
Are you saying that SRAM told you to...scram? I'm surprised that they would not replace it. Thanks for the pic, though. I have always wondered what they looked like.


Top
   
PostPosted: Sat Jul 19, 2014 2:11 pm 
Offline

Joined: Mon Jan 24, 2011 8:09 pm
Posts: 918
Or do the smart thing and just throw it away and buy another cassette.

If Sram says nada, well, what are you going to do?


Top
   
Posted: Sat Jul 19, 2014 2:11 pm 


Top
   
 
PostPosted: Sat Jul 19, 2014 2:14 pm 
Offline

Joined: Tue Sep 14, 2010 3:28 pm
Posts: 1405
This happened to me too when the cassette became stuck on my ORC freehub body. Basically, I had to take the cassette apart to remove it. I reassembled without gluing it back together and used it until it wore out. Perhaps your lockring worked it's way loose somehow, and that is where the play came from. I had an issue with a loose lockring a few years ago and seem to recall it being with this cassette. Have tried just reassembling?


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. SRAM Red RD with 28t cassette

in Road

NiFTY

13

1130

Mon Apr 04, 2016 6:59 am

addictR1 View the latest post

There are no new unread posts for this topic. Red 22 cassette noisy

in Road

Simon430

7

804

Fri Nov 06, 2015 10:58 pm

Zigmeister View the latest post

There are no new unread posts for this topic. 11 speed cassette compatibility

[ Go to page: 1 2 ]

in Road

clm2206

21

1262

Sat Oct 03, 2015 4:35 am

novetan View the latest post

There are no new unread posts for this topic. Dura Ace rd-7800 with 12-30T cassette?

in Road

eyedrop

6

747

Thu Feb 04, 2016 10:25 pm

Team Murray View the latest post

There are no new unread posts for this topic. 3D+ Rotor cranks with new cassette

in Road

canoas

5

568

Thu May 19, 2016 11:12 pm

TomColnago View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: benzebub, Bing [Bot], Google [Bot], Klaster1, Lightweenie, nickcube, Yahoo [Bot] and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited