Garmin Out-in-front Mounts Ad Nauseum
Moderators: robbosmans, Moderator Team
-
- Posts: 938
- Joined: Mon Jan 24, 2011 8:09 pm
So at the Otter show, Barfly has a new released Bar Fly Sli. Basically, very similar to the 2.0, but it has small indentations to allow you to secure/fasten a Shimano Di2/EPS junction box on the underside of the mount below the computer/bottom side.
http://www.barflybike.com/bar-fly-20-installation-tips/
So, they have the install tips for the 2.0 page where it shows a similar idea for the other mount, but this is supposed to be a more graceful/better implemented. No photos available of a Di2 junction mounted to this new one though I could find anywhere. Having a hard time envisioning what they did exactly now to this new one. You can pre-order it, but it is like $50...ouch, for plastic.
Interesting. Never though of trying to strap my mount another place, but would like it better there than that rubber band strap that sometimes falls off I'm using now on the stem.
Can mount a camera under it now also.
http://www.barflybike.com/bar-fly-20-installation-tips/
So, they have the install tips for the 2.0 page where it shows a similar idea for the other mount, but this is supposed to be a more graceful/better implemented. No photos available of a Di2 junction mounted to this new one though I could find anywhere. Having a hard time envisioning what they did exactly now to this new one. You can pre-order it, but it is like $50...ouch, for plastic.
Interesting. Never though of trying to strap my mount another place, but would like it better there than that rubber band strap that sometimes falls off I'm using now on the stem.
Can mount a camera under it now also.
-
- Posts: 101
- Joined: Wed Jun 25, 2008 6:08 am
Zigmeister wrote:So at the Otter show, Barfly has a new released Bar Fly Sli. Basically, very similar to the 2.0, but it has small indentations to allow you to secure/fasten a Shimano Di2/EPS junction box on the underside of the mount below the computer/bottom side.
http://www.barflybike.com/bar-fly-20-installation-tips/
So, they have the install tips for the 2.0 page where it shows a similar idea for the other mount, but this is supposed to be a more graceful/better implemented. No photos available of a Di2 junction mounted to this new one though I could find anywhere. Having a hard time envisioning what they did exactly now to this new one. You can pre-order it, but it is like $50...ouch, for plastic.
Interesting. Never though of trying to strap my mount another place, but would like it better there than that rubber band strap that sometimes falls off I'm using now on the stem.
Can mount a camera under it now also.
2.0 could mount the junction box too, I don't know that this one is much different in how it attaches.
Also the Sli is machined alloy, like the K-Edge system, so maybe that makes the price a bit more palatable to you?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
goodboyr wrote:Can you mount camera, di2 box and edge all at same time?
Will be like some kind of rolling film studio!
Till quest - I will take a photo and upload it.
Sent from my iPhone using Tapatalk
2020 Canyon Grail AL 6.0
goodboyr wrote:Can you mount camera, di2 box and edge all at same time?
No mount for camera.......
You can mount the Di2 box like this.......
For Campagono EPS and Shimano Di2 box, install a small strip of 3M dual side tape.
See all my bike h e r e
Tillquist wrote:Lewis wrote:Have you created one to fit the OEM Canyon Ritchey stem yet buddy?
Do you have a picture of that stem ?
Here we go buddy. Will this be ok?
Sent from my iPhone using Tapatalk
2020 Canyon Grail AL 6.0
Lewis wrote:Tillquist wrote:Lewis wrote:Have you created one to fit the OEM Canyon Ritchey stem yet buddy?
Do you have a picture of that stem ?
Here we go buddy. Will this be ok?
Sent from my iPhone using Tapatalk
Yes i have A Mount for that stem
See all my bike h e r e
New mount coming soon......
See all my bike h e r e
-
- Posts: 16
- Joined: Sat Jun 23, 2012 12:42 pm
Looking into Garmin mounts has anyone used a BarFly 3.0 MTB on a road bike mounted to the left side of the bars (i.e. flipped) to give a stubby mount out front?
- spookyload
- Posts: 1048
- Joined: Wed Feb 23, 2005 6:47 am
- Location: Albuquerque, NM
Tilquist...does the one for the Plasma work for the Cinelli Ram too? Bar Fly has been sitting on my order since 6 April saying they are waiting on plastic. Tired of waiting on them.
JasperGr wrote:Tillquist, is there any news for the release date of the c260 mount?
Verzonden vanaf mijn iPhone met behulp van Tapatalk
Yes, i got them......
See all my bike h e r e
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com