Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sat Dec 16, 2017 4:41 am

All times are UTC+01:00





Post new topic  Reply to topic  [ 15 posts ] 
Author Message
PostPosted: Sun Jun 08, 2014 4:24 am 
Offline

Joined: Mon Aug 15, 2011 4:48 am
Posts: 451
I was given a TCR SL a few weeks ago, made it a frame for testing bits on. What i decided i would do was the run discs on, just for un, so i can swap out wheelsets and go ride cross, but its main use will be for the road. anyhow i ordered a Tapered 1-1/8 to 1-1/2 tapered fork, which is between countries currently, but the stupid Giant overdrive is made for 1-1/8 to 1-1/4 tapered forks. I was led astray by being told at the LBS that it ran a standard upper bearing and then on the stock fork it ran a chunkier lower bearing, therefore it should run a normal 1-1/2 fork and bearing happily. So sure enough in confidence i ordered the headset from them and lo and behold the thing is not even close to fitting the 1-1/2 bearing in the bottom... So heres my question...

1) Do i Search in vain for a bearing to run the 47mm OD and 1-1/2 ID
2) Chuck the fork to a machinst and ask them to turn the lower crown to 1-1/4 to run a giant headset (about 3mm per side would be taken off)
3) Spin up a couple brass bushings to use as a lower bearing instead...

Im really annoyed the guy at the bike shop that sells giant assured me it would work out, and now its not an easy bolt together thing.

Any opinions?

_________________
I guess there's worse hobbies than making a bike light? Right?


Top
   
Posted: Sun Jun 08, 2014 4:24 am 


Top
   
 
PostPosted: Sun Jun 08, 2014 6:14 am 
Offline

Joined: Wed Mar 19, 2014 3:18 pm
Posts: 265
Isn't the overdrive 1 1/4 upper 1 1/2 lower? If anyone makes any sort of reducer bearing it'll be Chris king.

Sent from my SGH-I337M using Tapatalk


Top
   
PostPosted: Sun Jun 08, 2014 6:49 am 
Offline

Joined: Mon Aug 15, 2011 4:48 am
Posts: 451
The fork that's come out of it is 1-1/8 upper 1-1/4 lower. It's 2011 model SL TCR.

_________________
I guess there's worse hobbies than making a bike light? Right?


Top
   
PostPosted: Sun Jun 08, 2014 3:30 pm 
Offline

Joined: Fri Mar 18, 2005 4:12 pm
Posts: 2928
Location: eh?
If the fork is indeed 1 1/8 to 1 1/4 than the fork is from 2008 or 2009 (can't quite remember when they switched.)

If the frame is indeed 2011 then I would just get the correct fork from Giant.

FYI if the frame is also 2008/2009 than there is a free replacement for the headset. The stock item could not be adjusted properly - it would tighten on its own.

Riding cross on a TCR SL???. Good luck with that cause you'll be doing it on 23 mm or maybe 25 mm tires.

_________________
wheelsONfire wrote:
When we ride disc brakes the whole deal of braking is just like a leaving a fart. It happens and then it's over. Nothing planned and nothing to get nervous for.


Top
   
PostPosted: Mon Jun 09, 2014 6:27 am 
Offline

Joined: Wed Mar 19, 2014 3:18 pm
Posts: 265
Right I don't know what is was thinking :P

Sent from my SGH-I337M using Tapatalk


Top
   
PostPosted: Mon Jun 09, 2014 7:09 am 
Offline

Joined: Mon Aug 15, 2011 4:48 am
Posts: 451
Well the fork I had brought was a cross fork and had the room for a big front tyre, the rear will squeeze a 25. Hmmmm

_________________
I guess there's worse hobbies than making a bike light? Right?


Top
   
PostPosted: Mon Jun 09, 2014 9:11 am 
Offline

Joined: Mon Aug 15, 2011 4:48 am
Posts: 451
So current option is to ditch the aftermarket fork I brought, buy a standard 1-1/8 fork and headset and run one of these shims which take the headset lower bearing from a 1-1/4 to a 1-1/8 lower OD

_________________
I guess there's worse hobbies than making a bike light? Right?


Top
   
PostPosted: Mon Jun 09, 2014 9:12 am 
Offline

Joined: Mon Aug 15, 2011 4:48 am
Posts: 451
Forgot the link http://wheelsmfg.com/headtube-reducer.html

_________________
I guess there's worse hobbies than making a bike light? Right?


Top
   
PostPosted: Tue Jun 10, 2014 6:54 am 
Offline

Joined: Thu Jan 08, 2004 10:11 pm
Posts: 792
Your best option would be to sell/trade it for a proper cross frame...


Top
   
PostPosted: Tue Jun 10, 2014 4:17 pm 
Offline

Joined: Fri Mar 18, 2005 4:12 pm
Posts: 2928
Location: eh?
Yeah if this is going to see any off road use I'd say fuggetaboutit. The rear triangle on the TCR SL is very tight. A 25 mm slick will barely clear the brake bridge and is equally tight behind the BB. Space behind the seat tube isn't much better. Sorry, just not going to work.

Now set it up for road use and you have yourself a real weapon.

_________________
wheelsONfire wrote:
When we ride disc brakes the whole deal of braking is just like a leaving a fart. It happens and then it's over. Nothing planned and nothing to get nervous for.


Top
   
PostPosted: Wed Jun 11, 2014 5:41 am 
Offline

Joined: Mon Aug 15, 2011 4:48 am
Posts: 451
By off road I mean gravel roads around where we holiday, not proper cross racing. Should have clarified.

Fork and original headset is sold, now trying to find a fork that is to my liking

_________________
I guess there's worse hobbies than making a bike light? Right?


Top
   
PostPosted: Wed Jun 11, 2014 6:47 pm 
Offline

Joined: Fri Mar 18, 2005 4:12 pm
Posts: 2928
Location: eh?
Sorry but you will have the same problem. 25 mm tires on gravel won't be fun.

_________________
wheelsONfire wrote:
When we ride disc brakes the whole deal of braking is just like a leaving a fart. It happens and then it's over. Nothing planned and nothing to get nervous for.


Top
   
PostPosted: Wed Jun 11, 2014 7:14 pm 
Offline

Joined: Thu Jan 08, 2004 10:11 pm
Posts: 792
25mm is doable for the occasional gravel section. But there is a big chance of getting a flat tire or falling on your face. I would go for at least a 28mm tire. And that won't fit the TCR.


Top
   
PostPosted: Thu Jun 12, 2014 6:56 am 
Offline

Joined: Mon Aug 15, 2011 4:48 am
Posts: 451
I'm not talking 80km at a time, just splashes to liven up rides and all that. If it doesn't fit I'll run a 23. No big deal.

_________________
I guess there's worse hobbies than making a bike light? Right?


Top
   
PostPosted: Thu Jun 12, 2014 6:57 am 
Offline

Joined: Mon Aug 15, 2011 4:48 am
Posts: 451
Anyone know of a 1-1/8 non tapered 700c road fork that's not mega dollars?

_________________
I guess there's worse hobbies than making a bike light? Right?


Top
   
Posted: Thu Jun 12, 2014 6:57 am 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 15 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Giant OD2 headset weight savings

in Road

haynesdavid1988

4

657

Thu Jun 22, 2017 3:18 am

haynesdavid1988 View the latest post

There are no new unread posts for this topic. Opinion needed regarding fork and headset.

in Road

Y26

2

343

Fri Jul 28, 2017 5:58 am

Y26 View the latest post

There are no new unread posts for this topic. Boardman Road Comp Frame Fork Headset Weight

in Road

kordis1

0

240

Sun Jul 16, 2017 9:37 am

kordis1 View the latest post

There are no new unread posts for this topic. Trek Madone 2 series frame/fork/headset weight

in Road

sergej28

2

467

Mon Apr 17, 2017 8:52 pm

SBirch View the latest post

There are no new unread posts for this topic. Fork length Ridley Helium SLX fork?

in Road

Beaver

2

425

Mon Jul 17, 2017 5:31 pm

Beaver View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], campbellrae, Spooger and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited