Hello everyone

I am building a FM066 frame now and I was looking for some examples for paint and parts, how they will look on the frame. I realised that a gallery for FM066 frames would be nice.

Unfortunately I am not able to add my bikes picture until I got my frame from post, but meantime please send some photos of your bikes.

I am hoping that we can create a nice, crowded, good database for FM066 frames

heres mine, nothing special as it was built up proper cheap, 105 drivetrain, 10sp campag centaur brifters, reflex clinchers to tricolor 600/mavic hubs, super random cockpit components. not very light

Awesome Wantax.

ex-bike

Just sitting as frame and forks too lazy to advertise

that looks great, I've been trying to decide what colour i want to paint mine since it came in the post but i haven't been able to come to a conclusion yet, that gives me some ideas though

I was planning to buy this, but went for all black...

thats not bad but i think the red accents look too much like cervelo....or whoever does the red accents on the inside of the fork leg

one solid colour is more my thing, maybe with a few accents of another

Sort of a Mario Andretti tribute theme.

Which model is the saddle glepore?

Its a Chinese SMP copy, all over alibaba, also listed as a Prologo 1200 or something. Rode a padded SMP before this, this is very nice if a little hard. 135 g. I sanded off the logos etc.

fm069. More pics and build info in the thread on here somewhere, as well as my link in sig.

_________________
http://www.seanblurr.com

Here is my FM066SL
I got the post yesterday, built the same day and did the first ride this morning.



7050grams measured with pedals, bottle cages and Garmin with sensors.
Build list;

My FM066SL UD matte with custom vinyl stickers, 5.405kg as shown (minus lights and computer):

https://www.flickr.com/photos/91724453@N02/sets/72157642628171634/

Detailed build list:

Frame: FM066SL 58cm/BSA BB/UD matte - 940g(inc. FD brazed-on, RD hanger and cable stops)
Fork: Scott Addict LTD 1-1/8", steering column cut to 250mm, needs 1-1/2" to 1-1/8" adapter crown race - 297.7g(uncut: 313.5g)
Headset: mixed parts from various headsets - 78g
Expander plug: Roxycle - 15.0g(inc. 4.2g top cap & bolt)
Spacers: carbon, total 20mm - 9.1g

Shifters: Sram Rival(2009) 2x10 speed - 325g
Front derailleur: Shimano Dura-Ace FD-7900-F - 65g
Rear derailleur: Sram Red black edition - 147g(w/ original pulleys)
RD pulleys: Roth Shek carbon 11T - 9.5g/pair (Red pulleys=22.4g)

Cranks: Stronglight Pulsion compact ISIS drive/172.5mm - 319.8g(cranks only, without bolts)
Chainrings: Sram PowerGlide 48/34T - 48T:74.8g, 34T:27.8g
Chainring bolts: KCNC - 10.1g
Crank bolts: J&L hollow titanium M15x12L - 14.2g with washers
Bottom bracket: Chin-Haur CH-95 ISIS 68x108mm(steel axle, similar to American Classic ISIS BB) - 126.9g(plastic central sleeve removed)
Chain: KMC X11SL 106 links - 218.1g
Cassette: SEQ-Lite full aluminum 10-speed 11-27T - 109.1g(inc. lock ring)
Pedals: Crank Brothers Eggbeater 3Ti - 187.6g(w/ titanium end caps & heat shrink tubes around axles)

Cable housing: Aican Bungarus, brake 108.5cm, shift 123cm - 44.5g
Cables: Aican, brake 174cm, shift 323cm - brake cables 24g, shift cables 23g
Ferrules: various - 8g
Inline adjusting barrels: Jagwire Mini - 6g/pair

Handlebar: Equinox(Gigantex) HR068 400mm c-c, reach 80mm, drop 140mm - 172g
Stem: Uno ASA105 120mm/7∘/φ31.8 - 108.2g(w/ ti bolts)
Bar tape: Deda Traforato - tapes 22g(110cm x2 used), plugs 5g
Saddle: unbranded full carbon(Toupe S-Works clone) - 91.5g
Seatpost: Token TK9191(aluminum) 27.2x350mm - cut to 260mm: 128.6g(originally 146g)
Seatpost clamp: Token TK160Ti 31.8mm - 8.4g
Brake calipers: Mr.Control JULY-21 CNC, steel pivots - 195g(without brake pads, pad holder bolts replaced by ti bolts)
Brake pads: Corima cork - 8.2g/4 pads

Wheelset: (part specs as follows) - front 449g, rear 582g
Front hub: Bitex RAF10 20H - 66.1g
Rear hub: Bitex RAR9 24H/Shimano 10S freewheel body - 186.5g(half of the pawls removed, originally 190.0g)
Rims: Farsports FSL38-TM 38mm tubular 20/24H - 20H:290.8g, 24H:282.7
Spoke: CN Mac Aero360, front:272mm x20, rear:269mm x12 / 274mm x12 - 180.5g
Nipples: CN ACC144 - 17.1g
Nipple washers: (comes with Farsports rims) - 4.9g

Tubular tires: Challenge Criteirum 300TPI, 22mm - 245.4g + 246.7g
Tire cement: Vittoria Mastik'One - 28g(4 layers of glue for each wheel)
Valve extender: Token TF20 20mm - 2.2g/pair
Skewers: J&L titanium bolt-on - 28.1g(without springs)

Chain catcher: Mr.Control - 7g
Bottle cage: Hylix carbon - 15.6g
Bottle cage bolts: aluminum M5x15L - 5.0g/4 bolts

And here's the initial build with low-profile alu clincher wheels and original fork, total weight is 5.840kg.