Wheels, Tires, Tubes, Tubeless, Tubs, Spokes, Hookless, Hubs, and more!
Moderator: robbosmans
Forum rules
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
-
Zoro
- Posts: 352
- Joined: Wed Oct 30, 2013 12:52 am
by Zoro on Thu Mar 13, 2014 12:32 am
Zoro wrote:Silk are always better given the choice - except in water.
Quoting myself...
I just ordered a new silk set without the Latex and light tread. I figured, if it rains they are the wrong Tyre anyway.
-
Zoro
- Posts: 352
- Joined: Wed Oct 30, 2013 12:52 am
by Zoro on Thu Mar 27, 2014 7:14 pm
fdegrove wrote:Hi,
Sorry, but I do not quite follow what it is you just bought. Care to clarify a little?
TIA,
FMB is making me 25mm with no latex on the sidewalls, and the record tread (vs the heavier Vittoria tread on the cx) that I plan to pick up from François in 3 weeks.
My "issue" has been that there are no very light tyres for 25mm wide rims. I was using the Veloflex Records with great success, but on narrow rims. We changed to these Mercury M5 wheels that we love, except for tyre selection. They require wider tyres. Others do use 21-23mm tires - that is just wrong. Anyway after using the FMB competition cx 25 for a bit, I thought that they were a wee heavy for USA / Southern California and Arizona riding were we don't ride in the rain, and race roads are generally good. Still, we have been unlucky with flats (post race), but so far nothing that has cost any result. I "believe" these will be among the lightest 25mm tyres out there.
So...I am getting a custom set made that fits the racing my kid does. As he is racing in the EU next month I thought I'd drop by and visit FMB.
I will post pictures / what I can later.
-
HillRPete
- Posts: 2284
- Joined: Tue Apr 12, 2011 8:08 am
- Location: Pedal Square
by HillRPete on Mon Apr 07, 2014 1:24 pm
I'm looking to expand my bike mech skills with tubular repair ones this year. Got two or three punctured Conti tubs around. At least one of them has had an unsuccessful injection of Pitstop. Now my question is, can I just try to spot the puncture and patch it for starters, or do I need to replace the tube, which would mean much more sewing. Thanks.
-
fdegrove
- Tubbie Guru
- Posts: 5894
- Joined: Tue May 03, 2005 2:20 am
- Location: Belgium
by fdegrove on Mon Apr 07, 2014 10:17 pm
Hi,
No idea how much of this Pitstop went in but if it didn't cure the problem (it often does not) then you either patch the leak or if the leak is too large you replace the inner tube.
Which doe not require all that much sewing really.
Either way, having some liquid latex in the inner tube may lead to other problems afterwards....
Ciao,
Being a snob is an expensive hobby.
-
HillRPete
- Posts: 2284
- Joined: Tue Apr 12, 2011 8:08 am
- Location: Pedal Square
by HillRPete on Mon Apr 07, 2014 10:39 pm
Thanks fdegrove. Yeah the Pitstop didn't do it. Pinch-flatted a Conti TT tub on a rock, probably not the best idea to use it in the first place. Lots of sealant came back out at the base tape. Will try one of the others first and hope for a smaller defect. Velox patch kit on the way!
-
Geoff
- Posts: 5395
- Joined: Sat Dec 13, 2003 2:25 am
- Location: Canada
-
jtsoderman
- Posts: 8
- Joined: Thu Mar 03, 2011 9:32 pm
by jtsoderman on Wed Apr 16, 2014 3:06 pm
I've got a perfectly good tubular tire that I had to pull off to get some spokes replaced after a crash. Unfortunately the base tape shredded in the process. I've read about the technique of replacement but I have a few questions (apologies if these have been asked previously, my search skills are not ninja level)
1. Is barge cement the same thing as 'shoe goo'? I seem to remember seeing that stated somewhere, and I think that stuff might be easier to find
2. What would you use to replace the whole base tape? something like a velox fond de jante strip that you would use for a clincher?
If this turns into too much of a project...the answer might just be tire alert
-
fdegrove
- Tubbie Guru
- Posts: 5894
- Joined: Tue May 03, 2005 2:20 am
- Location: Belgium
by fdegrove on Wed Apr 16, 2014 3:45 pm
Hi,
If this turns into too much of a project...the answer might just be tire alert
I don't master this myself yet.
A small strip of the base tape that needs to be put back on is easy enough (I use liquid latex for that which can be found in most art shops) but doing the entire base tape in one go and having it aligned properly is not easy at all.
It may turn out easier to go by say 30 cm a go if you still have a decent visual clue of where it should go.
Barge cement is shoemaker sole cement so I suppose this "shoe goo" is similar enough.
Then yes, there's always Tyre Alert. That what I'd do if the tyre is relatively fresh.
Ciao,
Being a snob is an expensive hobby.
-
Geoff
- Posts: 5395
- Joined: Sat Dec 13, 2003 2:25 am
- Location: Canada
by Geoff on Fri Apr 18, 2014 4:08 pm
Isn't that a rim strip? How did you get it to stick to the tire? I think I would be a bit concerned about how well the finished tire would bond to the rim with the close weave and fabric choice used for a rim strip.
-
atakaoka
- Posts: 99
- Joined: Tue Aug 07, 2012 2:29 am
- Location: Ibiuna-SP-Brazil
by atakaoka on Sat Apr 19, 2014 2:12 am
yes it is.to glue I use a good contact glue.It work very well.
cycling,a great individual sport,were you can't reach anything,whithout group effort.