Used aluminum road frame with alloy clinchers and carbon where possible. Things like the crank, frame etc. are purposely chosen to be low key with few logos. Most of the 3K weave will probably be given a light coat of black paint. It's too cold to work outside now so we'll see how I feel about sanding and modding after school is over.
I've been taking scale shots of everything so far so I'll start the work of posting them now.
Aiming at the 5 kg / 11 lb range for daily use in good weather.
EDIT: 4.94kg = 10lbs 14oz
EDIT: weights updated (~for estimated weights)
Code: Select all
Frame Fuji-Teschner Scandium 1017
Fork Easton EA90 SL (cut) 305
Expander+cap Cannondale SI 15
Spacer 10 mm carbon 5
Headset Cane Creek 10 86
Seat clamp KCNC SC9 30.7 13
Seatpost Hylix SL 27.2 tuned 113
Seat eBay carbon 95
Stem Uno7 110 mm -Ti bolts 103
Bar Hylix TT bullhorn 40cm 139
Bartape+plugs Soma 2.5mm 27
Bottle bolts Nylon x 4 3
Cable Shimano 25
Brake Planet X CNC 106
Crankset DA 7800 170 mm 508
BB DA 9000 -no tube 60
Chainring 130 mm 39 tooth 30
Chainring bolts Alloy single ring 8
Chain DA 9000 208
Brake lever Tektro RL720 tuned 37
Cog DA 14t track 30
Pedals Xpedo XRF06TT spd 164
Wheelset ~1275g:
Front:
Rim: AC 2218 24-hole 377
Hub Novatec A291SB-SL 59
Spokes Laser 287 mm 114
Nipples Polyax 12 mm 9
Rim tape Veloplugs 4
Tube Michelin Ultra Light 75
Tire Fusion 3 X-Light 23 183
Air 100 psi 5
Skewer J&L Ti -tuned 10
Rear:
Rim: AC 2218 28-hole 376
Hub Mack rear track 207
Spokes Laser 289 mm 135
Nipples Polyax 12 mm 10
Rim tape Veloplugs 5
Tube Michelin Ultra Light 75
Tire Diamante Pro Radial 24 196
Air 100 psi 5
Total 4939 grams on my scale