Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun May 29, 2016 10:28 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 22 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Wed Feb 12, 2014 12:48 am 
Offline

Joined: Fri Nov 18, 2011 5:19 am
Posts: 857
That ought to keep people from viewing the thread.

Now, my most recent tool - a 2013 Raleigh Militis 3 frameset with some kit I had laying around. The graphics were too loud so I sanded off most of the logos and (terribly applied) pinstriping. With the mix of raw carbon and black already on the bike it was very easy to blend and I think it looks fantastic up close. How it should have come factory, in my opinion.

Image
http://farm3.staticflickr.com/2884/1242 ... a17e_h.jpg
http://farm3.staticflickr.com/2851/1242 ... ed66_h.jpg
http://farm3.staticflickr.com/2832/1242 ... 558a_h.jpg


I just last night swapped my black Planet X brakes on and I've been waiting about 12 years for a different stem to show up.

Build:

Militis frame (sz 55) - 933g
Fork (cut) - 353g
Exogram w/Stages - 660g
BB - 50g
Shifters & cables - 314g
X-Dome 11-26 - 153g
Planet X CNC - 205g
YAW FD w/catcher - 82g
RED RD - 148g
Woodman post - 170g (est)
3T Arx Team (12cm) - 125g
3T Ergonova (42cm) - 204g
S-Works Toupe - 114g
Elite Cages (x2) - 85g
KCNC Skewers - 45g
Fizik Bar tape - 60g
SRAM 1091R chain - 245g
Aeolus D3 5 (clincher) - 1604g
Veloflex Corsa (x2) - 450g (est)
Keo Blades (cb/ti) - 180g
Cables - 85g
Tubes (2) - 160g (est)
Garmin sensor - 30g
K-Edge mount - 35g


Total est: 6610g


The ride is great and the front end is rock solid. Really looking forward to beating on this bike in races this year.


Last edited by Imaking20 on Tue Feb 25, 2014 11:57 pm, edited 1 time in total.

Top
   
PostPosted: Wed Feb 12, 2014 1:57 am 
Offline

Joined: Mon Sep 17, 2012 10:53 pm
Posts: 586
Hot damn! Sexy bike! I wish the toupe saddle worked for me, that saddle has always looks so sleek. Love it!


Top
   
PostPosted: Wed Feb 12, 2014 2:27 am 
Offline

Joined: Sat Nov 23, 2013 12:37 am
Posts: 93
Location: Ottawa region, Canada
Great build lovely bike. Congratulation

_________________
Patrick
Bike : http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=129586


Top
   
PostPosted: Wed Feb 12, 2014 3:17 am 
Offline

Joined: Sun Jun 17, 2007 6:56 pm
Posts: 736
This. Is. Sick.

_________________
6.24kg CAAD10


Top
   
PostPosted: Wed Feb 12, 2014 4:09 am 
Offline

Joined: Thu Dec 22, 2011 12:39 pm
Posts: 479
Location: DC
Great looking bike :thumbup: What stages crank arm are you running? Rival GXP? I thought those frames were BB30.

_________________
My Bikes:
BMC SLR01 TeamMachine
Cannondale CAAD8


Top
   
PostPosted: Wed Feb 12, 2014 11:13 am 
Offline
User avatar

Joined: Sun Jun 18, 2006 10:29 am
Posts: 5161
Location: Athens, Greece
Like what you' ve done with the frame. Very nice bike overall!

_________________
My 6696gr Cipollini Bond
My 8618gr Colnago Master X-light


Top
   
PostPosted: Wed Feb 12, 2014 4:36 pm 
Offline

Joined: Fri Nov 18, 2011 5:19 am
Posts: 857
Thanks, everyone!

plpete - you are correct in presuming Rival GXP for the Stages. The frame is BB30 and I'm using a Wheels MFG adapter for the 24mm spindle. My rain bike is a GXP so being able to swap the PM between bikes trumped the weight savings and "cool factor" of the BB30 crank.

That said, I would really like to have a Hollowgram Stages on this... assuming someone else foots the bill :)


Top
   
PostPosted: Wed Feb 12, 2014 4:45 pm 
Offline

Joined: Thu Dec 22, 2011 12:39 pm
Posts: 479
Location: DC
That's the same exact situation I will be finding myself in very soon. I got a great deal on the Stages PM through my team. My race bike has a GXP BB while my nicer BMC is BB30. I plan to be able to swap the crank whenever I'd like and the setup you have is exactly what I was considering. How do you find the Wheels MFG adapter? Any creaking from the crank? Can the adapter be easily removed in order to put the BB30 crank back in?

_________________
My Bikes:
BMC SLR01 TeamMachine
Cannondale CAAD8


Top
   
PostPosted: Wed Feb 12, 2014 5:28 pm 
Offline

Joined: Fri Nov 18, 2011 5:19 am
Posts: 857
Sounds like a very similar situation indeed - I sold my Quarq when I got a great team deal for the Stages!
I've been extremely pleased with the setup, having used it on two bikes now and another teammate did the same thing. The delrin adaptors don't make so much as a peep and removing them is as easy as pulling the crank. No need to force anything in or out.


Top
   
PostPosted: Wed Feb 12, 2014 6:09 pm 
Offline

Joined: Thu Dec 22, 2011 12:39 pm
Posts: 479
Location: DC
This is great news! Thanks a lot for the info. This will be my first power meter so I'm quite excited to be able to better quantify my efforts and riding and hopefully get stronger!

_________________
My Bikes:
BMC SLR01 TeamMachine
Cannondale CAAD8


Top
   
PostPosted: Wed Feb 12, 2014 6:20 pm 
Offline

Joined: Sun Jun 24, 2012 11:02 am
Posts: 379
Location: Danmark
Looks great. Have you been putting in any miles since painting the chainring? I've tried to do the same with mine, but i actually isn't too satisfied with how the paint is holding up. Just thinking what kind of paint you used?

_________________
Tumblr
Instagram
Kaptajn Webstore


Top
   
PostPosted: Wed Feb 12, 2014 6:30 pm 
Offline

Joined: Fri Nov 18, 2011 5:19 am
Posts: 857
plpete - I'm pretty new to power as well. It's a very exciting progression and congrats for making the jump!

CaptainP - I've got 1500+ miles on the rings with no touch-ups. I taped everything off with masking tape then careful used a razor blade to remove tape at the edges of the raised area (which is normally silver). This way, the chain does not contact the edge of the painted surface which would surely cause more chipping. I just used a rustoleum spray from the hardware store. I'm sure any paint will suffice. Be sure to thoroughly clean the surface first!


Top
   
PostPosted: Thu Feb 13, 2014 11:17 am 
Offline
Administrator
User avatar

Joined: Sat Jun 19, 2004 11:08 am
Posts: 6707
Location: Urbana, Illinois
Nice bike. Looks like my yard, fence snow and all.

_________________
RESIDENT GRUMPY OLD MAN.


Top
   
PostPosted: Sat Feb 15, 2014 1:53 pm 
Offline

Joined: Sun Feb 03, 2013 3:12 am
Posts: 215
Location: road
Very stealthy set-up all round, and well done with the cranks, they look great!


Top
   
PostPosted: Sat Feb 15, 2014 5:22 pm 
Offline

Joined: Mon Mar 12, 2012 4:43 pm
Posts: 330
You have motivated to repaint my 2012 Militis2. I loved the bike but not the scheme.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 22 posts ]  Go to page 1 2 Next

All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], DeRibble, MSNbot Media and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited