Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Tue Jun 28, 2016 4:24 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 20 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Mon Feb 10, 2014 5:09 am 
Offline

Joined: Thu Aug 29, 2013 11:41 pm
Posts: 8
I washed my bike yesterday I noticed that there is some cracking around the bottom of both the fork legs, drive side is worse with the cracking on both the outside & inside of the leg whereas the non drive side only has cracking on the inside of the fork leg.

I have attached some dodgy photo's but am after opinion on whether its just the paint or the carbon underneath.

The two photo's with my toe in them are the non drive fork leg, the rest are the drive side.

http://imgur.com/bkxQFrH
http://imgur.com/AF4mB3z
http://imgur.com/sFn3WxD
http://imgur.com/QPzbEyW
http://imgur.com/gs8kCm2
http://imgur.com/93Vm41Q


Top
   
 Post subject:
PostPosted: Mon Feb 10, 2014 7:09 am 
Offline

Joined: Tue Apr 17, 2012 11:20 am
Posts: 325
.


Last edited by Causidicus on Tue Jun 17, 2014 11:55 pm, edited 1 time in total.

Top
   
PostPosted: Mon Feb 10, 2014 7:40 am 
Offline

Joined: Tue Dec 23, 2008 2:57 pm
Posts: 813
Location: NYC
...the jagged-ness of the lines are consistent with actual cracks, not peeling/flaking pain or scratches. So now the question is , how did this happen? What kind of frame/fork is this? Just curious, does your burke do a lot of roof rack miles? Seems strange that cracks would be in same place on both fork legs? I would initially guess over-torquing your skewers but then it appears that the cracks may be far enough rom your dropouts that there is another explanation..EM3

_________________
______________

My 2013 Cervelo R5


Top
   
PostPosted: Mon Feb 10, 2014 8:02 am 
Offline

Joined: Thu Aug 29, 2013 11:41 pm
Posts: 8
Frame/forks is a 2013 Wilier Centro 1 SR. Bike has been on roof racks once, for a grand total of about 45 minutes. Skewers are just tightened to firm, nothing excessive.

It has been suggested that the paint has cracked where the fork tips are bonded to the bottom of the forks from general flexing.


Top
   
PostPosted: Mon Feb 10, 2014 10:06 am 
Offline

Joined: Thu Mar 26, 2009 11:06 pm
Posts: 365
Location: Yorkshire - God's Own Country
Prob is just paint due to flexing as you suggest. Still wouldn't ride it until checked.


Top
   
PostPosted: Mon Feb 10, 2014 11:43 am 
Offline

Joined: Sat Nov 10, 2007 9:51 pm
Posts: 416
how come the material around the fork tip has broken away as well in photos 3 and 4, maybe the fork tip has become unbonded and is cracking the paint from flexing inside the fork leg ?


Top
   
PostPosted: Mon Feb 10, 2014 11:53 am 
Offline

Joined: Wed Jan 22, 2014 11:48 am
Posts: 1409
Carbon fork I guess? Sand off the paint and check the matrix for cracks. If none present, cover with white electrical tape or re-paint :)


Top
   
PostPosted: Mon Feb 10, 2014 11:55 am 
Offline

Joined: Thu Aug 29, 2013 11:41 pm
Posts: 8
The internal frame that the bike sits on in my bike bag has sharp edges where the forks attach and covers more surface area then the front wheel normally would. I have only used it for one interstate trip but it was enough to crack the paint as shown in the photo. I don't believe the two are related though.


Top
   
PostPosted: Mon Feb 10, 2014 11:59 am 
Offline

Joined: Thu Jul 14, 2011 10:10 pm
Posts: 195
Don't ride it. Sand it down to matrix, or better get fork x-ray ;)


Top
   
PostPosted: Mon Feb 10, 2014 1:31 pm 
Offline

Joined: Thu Dec 12, 2013 9:48 pm
Posts: 15
Wilier will give you a new fork if you have a valid warranty.


Top
   
PostPosted: Mon Feb 10, 2014 1:58 pm 
Offline

Joined: Sun Jun 17, 2012 3:15 pm
Posts: 183
I'd say it was paint, they probably mask off the dropouts at that point for the first spray then do the rest afterwards. That's solid carbon there, if it gave way you'd probably know about it sooner rather than later. Get it replaced under warranty though, on principle if nothing else.


Top
   
PostPosted: Mon Feb 10, 2014 3:02 pm 
Offline

Joined: Fri Jan 31, 2014 4:54 pm
Posts: 337
Stripping down the paint before talking with manufacturer, I believe is a bad idea. It can void your warrant.

Just go your local LBS of the brand, or send them the photos and learn the warranty process.

Also, I wouldn't ride that bike until everything is fixed.

_________________
My Orbea Orca
My Stava
My Instagram


Top
   
PostPosted: Mon Feb 10, 2014 6:21 pm 
Offline

Joined: Sat Nov 02, 2013 10:17 pm
Posts: 103
Willier will warranty that.

I wouldn't ride it.


Top
   
PostPosted: Mon Feb 10, 2014 9:50 pm 
Offline
User avatar

Joined: Fri Sep 17, 2010 4:48 pm
Posts: 213
I disagree with the seemingly prevailing idea that it's cracked carbon.

The dropouts are solid aluminum and are probably 2-3" long with a majority of that material inside the hollow carbon fork. Aluminum bends, even thick aluminum. Paint does not bend. My guess is that the point at which the paint cracked is where the carbon ends and the aluminum begins. Perhaps there was some flex that caused the paint to crack... who knows. I doubt there's anything wrong with the bike and that it's unsafe...

All that said, I'd certainly have a rep look at it for possible warranty.


Top
   
PostPosted: Mon Feb 10, 2014 11:25 pm 
Offline

Joined: Tue Sep 11, 2012 6:07 pm
Posts: 1051
Location: The Lone Star State
I'm not an expert on carbon, but from my experience, I would err more on the side of a paint crank vs. broken carbon. That being said, I would let an "expert" at your LBS make that determination. I can tell you that I once had a similar experience with my old Madone, and Trek looked at it, before determining that it was a crack in the paint at a joint, and did not effect the structural integrity of the bike (it was later warrantied for other reasons). I think your next step is to take it in and have it looked at.

_________________
Trek Crockett, Madone, Superfly, SpeedConcept & Cobia


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 20 posts ]  Go to page 1 2 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Cracked paint around BB area on new Ridley.

[ Go to page: 1 2 ]

in Road

cdtf

29

2152

Sun Jun 26, 2016 11:54 am

fh8425 View the latest post

There are no new unread posts for this topic. How to tell if you have cracked frame?

[ Go to page: 1 2 ]

in Road

addictR1

21

1851

Wed Sep 16, 2015 7:57 am

addictR1 View the latest post

There are no new unread posts for this topic. seat stay cracked?

in Road

addictR1

10

660

Thu Oct 01, 2015 12:45 am

AJS914 View the latest post

There are no new unread posts for this topic. Stripping the paint of my TCR Advanced

[ Go to page: 1 2 3 4 ]

in Road

jorisee01

55

4234

Tue Jun 28, 2016 2:40 pm

cyclespeed View the latest post

There are no new unread posts for this topic. Attachment(s) Zipp Speed SL without paint

in Road

wheelsONfire

7

1088

Thu Oct 15, 2015 6:18 am

wheelsONfire View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: acetonehk, cyclespeed, eric01, Exabot [Bot], sawyer, wingguy, wobbly and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited