Bit of a newbie question... I have taken delivery of an Ibis Mojo SL-R frame and I'm thinking about doing a lightweight-ish build. I understand it takes a BB92 bottom bracket. What are my BB and crank options? I've been riding SS for a few years, so I'm leaning towards 1x10 or 1x11.
Thoughts? And thanks in advance for your suggestions!
BB92 Options?
Moderator: Moderator Team
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
BB92 looks pretty versatile. Enduro makes a BB92 - BB30 adapter. Not sure how good it is, but might want to give it a look. http://www.enduroforkseals.com/id258.html
Enduro makes decent bearings, but I've found that the grease they use isn't very water resistant, and your bottle sweat will eventually destroy them. Your best bet is to remove the seal, flush out the bearing with a cleaner, then repack it with a better waterproof grease (I have been using marine grease, available at any fishing or trailer supply store). This applies to both the standard steel and ceramic bearings.
In terms of cranks, you'll be looking at any Shimano offering or a SRAM GXP crank, unless you use an adapter.
Enduro makes decent bearings, but I've found that the grease they use isn't very water resistant, and your bottle sweat will eventually destroy them. Your best bet is to remove the seal, flush out the bearing with a cleaner, then repack it with a better waterproof grease (I have been using marine grease, available at any fishing or trailer supply store). This applies to both the standard steel and ceramic bearings.
In terms of cranks, you'll be looking at any Shimano offering or a SRAM GXP crank, unless you use an adapter.
Madone 9 - https://bit.ly/2Nqedbn
Emonda SLR - https://bit.ly/2UK5FP8
Crockett - https://bit.ly/2Xem4sk
Emonda SLR - https://bit.ly/2UK5FP8
Crockett - https://bit.ly/2Xem4sk
Kinda... but don't confuse the issue, it's not a BB30 adapter. There is no way for a 'normal' BB30 crank to work in a BB92 shell (there are exceptions but they all require modification or 'non standard' parts eg: SiSL arms with NextSL or DrCannondale spindle).
Any cranks that work with 73mm, outboard bearing BB's will work with BB92 as the bearings are in the same place, but housed in plastic cups instead of threaded aluminum ones.
Any cranks that work with 73mm, outboard bearing BB's will work with BB92 as the bearings are in the same place, but housed in plastic cups instead of threaded aluminum ones.
You know that you can use a BB92 RF bottom bracket and use any 24mm spindle crankset ?
http://www.pricepoint.com/Brand/Race-Fa ... racket.axd
http://www.pricepoint.com/Brand/Race-Fa ... racket.axd
Parlee Z3c
Independent Fabrication SSR // 953
Independent Fabrication Planet X
Knolly Chilcotin
Independent Fabrication SSR // 953
Independent Fabrication Planet X
Knolly Chilcotin
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com