Carbon rails and narrow cradle
Moderator: robbosmans
Would you consider this a problem? I'm not worried that it will snap, but just to be sure. I'm 93kg/203lbs. The Dash saddle is reinforced.
I'm interested in the forums thoughts on this too.
At the least I'd take a fine small file to any sharp edges on the clamps and especially the rocker saddle halfpipe thing.
What post is that?
At the least I'd take a fine small file to any sharp edges on the clamps and especially the rocker saddle halfpipe thing.
What post is that?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Dont see it as a problem, my alu post have the same size of cradle combined with a full carbon saddle and nothing has happened yet - BTW im 6,1(188cm) and 320lbs(145kg).
Thinks that KCNC makes a "cradle and yoke" set too use with carbon saddles.
Thinks that KCNC makes a "cradle and yoke" set too use with carbon saddles.
Thanks Yosti!
Its an KCNC TI Pro lite 8000. Love that name
Its an KCNC TI Pro lite 8000. Love that name
No problem
But if you are still worried, here is a link to that set I was talking about:
http://fairwheelbikes.com/kcnc-carbon-rail-seatpost-adapter-p-5802.html
And from a German site:
http://www.bike24.com/p257204.html
But if you are still worried, here is a link to that set I was talking about:
http://fairwheelbikes.com/kcnc-carbon-rail-seatpost-adapter-p-5802.html
And from a German site:
http://www.bike24.com/p257204.html
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com