I know they make a tubeless specific version - the C24-TL .. are there any problems converting the CL to tubeless?
What do you all recommend to get started? I'm thinking of picking up the Stans notubes kit and a set of Hutchinson tubeless tires. I'm not sure what width rim tape to get though..
If anyone has some experience on this I'd appreciate it if you chime in.
thanks in advance!
converting DA 7900-C24-CL to tubeless?
Moderator: robbosmans
- btompkins0112
- Posts: 2635
- Joined: Fri Feb 11, 2011 3:04 am
- Location: Mississippi
I converted some Ksyriums with the Stan's kit....the 19mm tape worked, so that experience should be the same for the 7900s
Mosaic RS-1
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478
Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478
Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Don't run Stan's sealant in the non-tubless versions. The ammonia in the sealant will eat away at the rim and ruin them. There's a thread here on the subject. Do a search and you'll see examples. You can try running Hutchinson ProtectAir or maybe Caffelatex, but DO NOT RUN STANS!!!
Madone 9 - https://bit.ly/2Nqedbn
Emonda SLR - https://bit.ly/2UK5FP8
Crockett - https://bit.ly/2Xem4sk
Emonda SLR - https://bit.ly/2UK5FP8
Crockett - https://bit.ly/2Xem4sk