Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Wed May 25, 2016 8:16 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

All times are UTC+01:00

Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Sun Dec 08, 2013 5:47 pm 

Joined: Sun Jan 11, 2009 2:43 am
Posts: 1
Hey Guys, thanks to all the posters, so much good info out here on WW. I wanted to ask a question about frame geometry characteristics. More specifically what could cause one bike to have a rear wheel that jumps around/slips a lot more than another during out of the saddle efforts? Below is a Bike Comparator with both measurements entered.

The first bike a 2008 56 Cervelo SLC-SL (red) jumps around like crazy. The second (green), a 2008 56 Cannondale six13, is much more stable.

The first thing I notice in the Comparator is the top tube and seat stay angles, much much different.

Maybe it’s not the geometry (stiffness?, weight?) or frame at all (bars?).
Any thoughts would be appreciated.

https://dl.dropboxusercontent.com/u/535 ... 3%2056.xls" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

PostPosted: Sun Dec 08, 2013 6:06 pm 

Joined: Sun May 16, 2010 7:28 pm
Posts: 806
Is guess it has to do with technique more than anything. A stiffer frame of course will do that more.

PostPosted: Sun Dec 08, 2013 6:11 pm 

Joined: Sat Jan 26, 2008 10:25 am
Posts: 392
Location: Cantabria
Same wheels? Most probably stiffness but it's hard to tell. A bicycle is an hyperstatic system, thus any variation of the characteristics of any component varies the forces other componets are submitted to.

A house with solid foundations, for instance is an isostatic system, hence is easier to trace what does what.

That's why bicycle manufacturers can fill thosand of catalogues with marketing bullshit and still (almost) everything is possible. :)

Can you elaborate on yur description?

PostPosted: Sun Dec 08, 2013 6:27 pm 

Joined: Tue Sep 14, 2010 3:28 pm
Posts: 1405
The longer chainstays on the Cannondale are giving you more traction. High cadence(low torque) out of saddle sprints will help your technique, so you can keep the rear wheel down on the Cervelo.

PostPosted: Mon Dec 09, 2013 1:17 am 

Joined: Mon Oct 15, 2007 9:28 pm
Posts: 1136
Chainstay length, bb height, and amount of weight on front end.

PostPosted: Mon Dec 09, 2013 1:24 am 

Joined: Wed Oct 23, 2013 9:55 pm
Posts: 108
I`ve noticed the same thing on my old R900 Cannondale. Uphill out-of-saddle sprinting causes the rear wheel to skip off the ground. On my SuperSix HM it doesn`t skip. It isn`t wheel related since I`ve run the same wheels on both.
I`m thinking it is related to weight distribution while sprinting, which would be due to frame geometry as well as bar positioning. It`s a combination of putting your weight on the handlebars while pulling up on one of the pedals.

While writing this I just noticed that boots2000 has just said essentially the same thing.

PostPosted: Tue Dec 10, 2013 8:59 am 
User avatar

Joined: Tue Jan 23, 2007 11:22 am
Posts: 3657
Location: Leg hurty
I used to be big on the old CAAD 4 and 5 Dales. I raced on them for quite a few years.
It was a characteristic of that frame to have lots and lots of 'tail wag'. My team mates used to laugh and joke about it and we all noticed the same effect even with different sizes and fits etc.
They would step out and bounce around all over the place, but always came back and never caused anything more than a few raised eyebrows in the sprints.
We always put it down to the huge amount of lateral stiffness in the rear triangle (them chainstays were by far the meatiest around at the time)
Interestingly, I ride a BB30 CAAD 9 now, and don't notice it to the same extent, It seems much more stable. This would indicate it isn't probably material related, or indeed the chainstays as the CAAD 9 has enormous tubes and bags of stiffness. Probably just a quirk of the geometry.
Could be worth you pulling up a geometry chart and overlaying them to look for similarities if it really bothers you.
Alternatively, just keep riding it and get used to it, alter your technique a little bit to compensate.
What I'm trying to say is......some frames just do that, not much you can do but learn to live with it. :thumbup:

Pedalling Law Student.

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. How to tie your lace up cycling shoes to prevent Heel Slip

in Road




Wed Jun 10, 2015 1:29 pm

syncmaster View the latest post

There are no new unread posts for this topic. Geometry choice - please help!

in Road




Sun Mar 27, 2016 12:11 pm

KH View the latest post

There are no new unread posts for this topic. Focus Izalco Max available as a frameset? Geometry?

in Road




Mon Mar 21, 2016 12:01 am

reedplayer View the latest post

There are no new unread posts for this topic. Attachment(s) Help buying bike, geometry charts...

[ Go to page: 1 2 ]

in Road




Sat Feb 06, 2016 2:29 am

cyclenutnz View the latest post

There are no new unread posts for this topic. Bianchi Specialissma- any geometry or availability info

in Road




Tue Jul 07, 2015 8:15 am

wheelsONfire View the latest post

All times are UTC+01:00

Who is online

Users browsing this forum: 5DII, Bing [Bot], Exabot [Bot], JohnnySea, RussellS, SyDo, Yahoo [Bot] and 30 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited