Cutting a seatpost.

Questions about bike hire abroad and everything light bike related. No off-topic chat please

Moderator: Moderator Team

Post Reply
Posts: 19
Joined: Fri Jan 25, 2013 2:31 am

by gtxizang

Just bought a Titanium Airborne seatpost. Its 33cms long. I usually use a 10cm length to ride. I want to cut 10m of the post to lose weight, is that safe to do? It will leave me with 23cms. 13 cms of the seatpost in the frame and 10 outside. Its supposed to be bulletproof, so I just want to trim it somewhat. Your thoughts thanks.

by Weenie

User avatar
Frankie - B
Posts: 6581
Joined: Mon Jun 02, 2003 8:17 am
Location: Drenthe, Holland

by Frankie - B

Stop being in doubt, get the pipe cutters or the hack saw out.

I you want to go even lighter, you can also make a diagonal cut like Ritchey does with its posts.

Please next time post this in Road or MTB forums. :thumbup:
'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'

Posts: 112
Joined: Sat Jan 23, 2010 1:24 am
Location: Evansville, IN, USA

by Gearhead65

+1. I did the same. Just watch your minimum insertion length and it will work fine.
2015 Specialized Crux Pro
2013 BMC TMR01 custom build
2013 Cannondale F-Series 29'er, Carbon 3
2012 Cannondale CAAD10-1 custom build, 14.06 lbs
1980 Palo Alto custom build

User avatar
Posts: 1235
Joined: Thu Aug 25, 2005 7:09 pm
Location: In the industry

by elviento

If your weight is that of a typical cyclist, you can probably cut off 16cm of post.
Fast falcons:" onclick=";return false;
Facebook: falcobikeglobal

Posts: 19
Joined: Fri Jan 25, 2013 2:31 am

by gtxizang

Thanks guys. I just bought a Moots 40cm post, 27.2 there's no insertion marks, I'm about 105kgs how much do you think I can cut of safely thanks :D

User avatar
Posts: 7045
Joined: Sat Jun 19, 2004 11:08 am
Location: Urbana, Illinois

by Juanmoretime

With a titanium post you could get by with as little as 70mm inside the frame. For me personally my number is I like at least a 100mm in the frame.

Posts: 20
Joined: Wed Nov 13, 2013 7:20 pm
Location: Edmonton, AB

by hurricanejosh

you want the bottom of the seatpost to extend past the bottom of the top tube at the TT/seat tube junction by at least 2cm. this prevents lateral forces from stressing that joint and "twisting" your top tube off the seat tube. otherwise you should be fine.

by Weenie

User avatar
Posts: 775
Joined: Fri Apr 12, 2013 1:19 pm
Location: Oxford, England

by Devon

gtxizang wrote:I want to cut 10m of the post to lose weight

You may have some issues if you cut 10 metres off your post ;)
Campagnolo; because it's a bicycle, not a fishing rod.

Post Reply
  • Similar Topics
    Last post