Scott R4 - 6,24 kg

Who are you (no off-topic talk please)

Moderator: Moderator Team

User avatar
monchito
Posts: 49
Joined: Mon Apr 16, 2012 7:46 pm
Location: Barcelona

by monchito

Hi again.

Here comes some new pictures. In the first one you can see the molds i need to do the antischleck. I started based on the original that i made previously with iron. It has a complicate form so i need 4 molds to do the piece.

Image
DSC04372 por monchito3000, en Flickr


Here you can see the molds for the spoodpley. I´m pretty sure that this pieces made in carbonfiber will not be strong enough, but the idea is to take the original steel ones, take off almost everything except the contact surface with the cleats, and fill again with CF. Seems a little complicate but the idea is to do some light but ethernal plates. The molds don´t look nice and "technological" but the form inside is perfect.

Image
DSC04373 por monchito3000, en Flickr


And this pictures are from the mold of the brake piece. The first one is the mold and the piece waiting for the countermould. The green stuff is to allow some holes between the mold and the countermould to facilitate the separation later.

Image
DSC03385 por monchito3000, en Flickr

And here the mold and the countermould.

Image
DSC04376 por monchito3000, en Flickr

The next step is to do the thread rings in aluminium, and put that pieces and the CF together inside the molds. Simple :wink:

beepbeep
Posts: 46
Joined: Sat Feb 16, 2013 4:44 pm

by beepbeep

Wow! Inspiring thread :D

I was in Barcelona last year and got to ride the amazing Tossa coast road - beautiful!

by Weenie


oldmuthariley
Posts: 83
Joined: Sat Apr 14, 2012 9:35 pm

by oldmuthariley

inspiring stuff 8)

Wederkinck
Posts: 36
Joined: Mon Mar 25, 2013 11:15 am

by Wederkinck

Wow - Cool stuff!

nagge
Posts: 129
Joined: Mon May 21, 2012 6:36 am
Location: Sweden

by nagge

This is WW taken to another level :unbelievable:

Post Reply
  • Similar Topics
    Replies
    Views
    Last post