You're going all out - I love it.

Doesn't look like much off the old bike is getting transferred over.

Is that a 120mm stem?

_________________
My sub-5.6kg / 12.32lb Addict R1

My ~9.3kg / ~20.5lb Scale 29 Pro

Thanks, yes EA90 120mm

+1.
Great bike. Bolts need to go. Either stainless bolts holding your stem together or stainless bolts holding your bones together. (Stem bolts will be lighter.)

Got it .. I have some Ti bolts lying around .. Thank you all for the concern !

Zipp Cork Pads 10g and still waiting for THM Bottom Bracket from Starbike.

I have the proper Loctite for the THM BB. Ping me when it arrives.

Will do Tim Thanks

I'm building up something eerily similar. Must be killing you to wait for that BB - I know it's killing me since I ordered the same thing from Starbike more than a month now! Did you get any word on ETA?

The last time I emailed them was thanksgiving and was told they were getting a batch beginning of last week, but I haven't heard from them at all last week. I ordered 2 BB one for this build and the S5 is getting the proper BB this time. I've been using a 9mm carbon spacers on the S5 with the stock sram press fit bearings to work with the M3 Cranks with no problems.

Bad news, I just got word from Chris at starbike that the thm bb's didn't arrive as expected. Thm said maybe 6-10 days. Ouch!

with shipping from Germany, I expect this to arrive next year maybe first week of January.

after almost 3months of wait .. my THM Bottom Bracket came in today, a couple of small parts carbon catcher and MCFK expander.
I should finish the build this weekend.

Complete Build- 12.5lbs

Cervelo R5 VWD Frameset
Campagnolo SR Shifter, Front and Rear Derraileur
Nokon Cable Housing
Cycleworks EE Brakeset
Zipp Cork Pads
Zipp SLC2 TB Handlebar 44cm
Easton EA90 ti bolts 120mm Stem
MCFK Expander
3T Dorico LTD seatpost cut
Tune Speedneedle Saddle
Lightweight Standard III Wheelset
Continental GP4000s Tubular Tires
Madfiber Ti Skewers
THM Clavicula Crank
Praxis Rings 53/39
KCNC Chairing Bolt
Look Ti Keo Blade pedals
KMC Chains

Looks good -- since you used the MCFK expander (in lieu of the starnut), were you able to fit the aluminum insert that's supposed to be glued inside the steerer tube for added strength?

this is a great job.