Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Fri Dec 09, 2016 6:49 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 6099 posts ]  Go to page Previous 1252 253 254 255 256407 Next
Author Message
PostPosted: Sat Nov 09, 2013 8:02 am 
Offline
in the industry
User avatar

Joined: Fri Jan 23, 2004 6:31 pm
Posts: 373
The bar tape is Shimano Pro in Digital Carbon. Matches the Di2 Hood material and works so well, I even swapped out the old Cinelli cork tape on my C59 for it. I also wrap backwards, always have. Looks cleaner and no electric tape ends.

_________________
carbonLORD.com


Top
   
PostPosted: Sat Nov 09, 2013 5:06 pm 
Offline
in the industry
User avatar

Joined: Fri Jan 23, 2004 6:31 pm
Posts: 373
More goodies for the C59...

Tune U20's (they almost floated off the floor)...

Image

_________________
carbonLORD.com


Top
   
Posted: Sat Nov 09, 2013 5:06 pm 


Top
   
 
PostPosted: Sat Nov 09, 2013 6:08 pm 
Offline

Joined: Tue Jul 27, 2010 10:04 am
Posts: 593
Hope you have better success with tune skewers than I've managed. Have both the AC14 and DC14 and neither set would hold the rear wheel in place.

_________________
Colnago M10 viewtopic.php?f=10&t=91208&hilit=colnago+m10+maob
Simplon Pavo III viewtopic.php?f=10&t=116069"


Top
   
PostPosted: Sat Nov 09, 2013 11:59 pm 
Offline
in the industry
User avatar

Joined: Fri Jan 23, 2004 6:31 pm
Posts: 373
I wonder, do yours have the end nuts that seat into the dropouts? I'd never seen that before though mine came with both that and traditional end caps. I will set them up tomorrow and give them a spin. Hopefully the weight isn't the only feature they offer. We'll see... I'll report back after a ride!

_________________
carbonLORD.com


Top
   
PostPosted: Sun Nov 10, 2013 12:59 am 
Offline

Joined: Tue Jul 27, 2010 10:04 am
Posts: 593
carbonLORD wrote:
I wonder, do yours have the end nuts that seat into the dropouts? I'd never seen that before though mine came with both that and traditional end caps. I will set them up tomorrow and give them a spin. Hopefully the weight isn't the only feature they offer. We'll see... I'll report back after a ride!


The levers in your photo are identical to my DC14 skewers except that my pair do indeed have traditional end nuts. The earlier version, AC14, were completely different. No matter how tight I close them neither model seem to hold my rear wheel in place and there's only so much force you're prepared to use, especially with carbon dropouts. Hope you have better luck tomorrow!

_________________
Colnago M10 viewtopic.php?f=10&t=91208&hilit=colnago+m10+maob
Simplon Pavo III viewtopic.php?f=10&t=116069"


Top
   
PostPosted: Sun Nov 10, 2013 7:49 am 
Offline
in the industry
User avatar

Joined: Fri Jan 23, 2004 6:31 pm
Posts: 373
Didn't even get past the front wheel before I realized they are not right for me, bummer.

Not to nitpick but a pair of €200 skewers deserves to get picked on, a little.

Starting with the front wheel, I installed the end cap that seats into the dropout upside down and quickly realized it when the wheel was sitting cockeyed. Flipped it and gave it a second try, the quick release lever didn't line up on my fork. This was not a deal breaker but I do notice the levers on this design fold in further then any other skewers Ive owned. So, I positioned the lever as far inward as possible and gave the front end a bounce test... ((((brrrrr)))) :? !?!?! Well that aint right! Wheel sounds like my hubs preload wasn't adjusted, rattle, vibration, no good.

Alright, let me try the standard end caps then. I liked the idea of a seated ones but the lever doesn't line up so...

Third attempt. By now I'm thinking I wouldn't want to use these in a race, but this isn't my race bike anyway. I read the included instructions and torqued them down no more then the Zipp skewers before them but the rattle and vibration from the front wheel was still there.

Took them off, put the Zipp skewers back on and the C59 is solid once again.

The closing action and workmanship of the TUNE skewers is topnotch. IMO the axle is too thin which may have somehow contributed to the vibration I was feeling.

I bought some Zipp Ti skewers to save 10g last season and had the same problem as you with the slipping rear wheel so I'll just stick to the ones that came with my 404's.

Anyone want a set of TUNE U20's?

_________________
carbonLORD.com


Top
   
PostPosted: Sun Nov 10, 2013 11:50 am 
Offline

Joined: Tue Jul 27, 2010 10:04 am
Posts: 593
Yeah, I found that even the cheapo carbon/ti skewers off ebay do a much better job than the tune skewers. Considerably cheaper and <10g heavier, and that's bearing in mind that the ebay skewers come with springs which makes changing the wheel much easier. As you say I could never envisage using any of the tune skewers in a race situation.

In general I've found any tune products I've owned to be a tad hit and miss. The skewers we've discussed but also the Gum Gum headset expander which was totally and utterly useless; I've had 3 Mag 180 hubs and on all of them the freehub splines became chewed up after less than 200kms; the Giels (sp?) stem was extortionately priced and as a WW the actual weight was extremely disappointing. I also own a set of Schwarzbrenner 42C wheels and they are indeed a very nice set of hoops but after less than 500kms they needed to be completely re-trued. Luckily I was able to do it myself but working with the internal nipples was a complete PITA. Just glad they weren't tubs!

Anyhow just my 2 cents worth about tune....

_________________
Colnago M10 viewtopic.php?f=10&t=91208&hilit=colnago+m10+maob
Simplon Pavo III viewtopic.php?f=10&t=116069"


Last edited by Frankie - B on Sun Nov 10, 2013 12:05 pm, edited 1 time in total.
no need to quote. this is a reply. thanks


Top
   
PostPosted: Thu Nov 14, 2013 12:14 am 
Offline

Joined: Sun Nov 10, 2002 6:03 pm
Posts: 331
Location: Belfast
Garmin Vector Pedals
Thanks to my 3 brothers


Top
   
PostPosted: Fri Nov 15, 2013 8:16 pm 
Offline

Joined: Sun Aug 08, 2010 5:12 am
Posts: 250
Location: Brasil
an explicit WW item

Image

purchased from prendrefeu - thanks dude!


Top
   
PostPosted: Sun Nov 17, 2013 2:46 am 
Offline
Moderator

Joined: Sat Apr 22, 2006 12:38 am
Posts: 1964
Location: Dutchess County, NY
edit

_________________
Speedplay is the devil!


Top
   
PostPosted: Sun Nov 17, 2013 5:30 am 
Offline

Joined: Mon May 05, 2008 5:15 pm
Posts: 759
Image

_________________
Colnago C50
2013 Look 695
2013 Cervelo S5


Top
   
PostPosted: Sun Nov 17, 2013 8:13 pm 
Offline
User avatar

Joined: Wed Apr 25, 2007 10:23 am
Posts: 1112
Location: Pack filler
A few goodies this week :mrgreen:

New disco slippers:

Image
Untitled by jekyll man, on Flickr

Some old stock S2 shorts from the assos factory outlet:

Image
Untitled by jekyll man, on Flickr

Ridley EOS winter training frame:

Image
Untitled by jekyll man, on Flickr

_________________
Official cafe stop tester


Top
   
PostPosted: Mon Nov 18, 2013 10:32 pm 
Offline
Shop Owner
User avatar

Joined: Tue Feb 08, 2011 7:56 am
Posts: 272
Location: California
Image

SLR01 as a training bike and SLR02 as a race bike.

Image

We just picked up Cervelo as a dealer so I also ordered a S2 to try out for a couple of months.

Image


Top
   
PostPosted: Tue Nov 19, 2013 2:36 am 
Offline

Joined: Tue Aug 02, 2011 9:20 pm
Posts: 1675
Location: New Zealand
ilvwhtgrls wrote:
SLR01 as a training bike and SLR02 as a race bike.


Nice! I thought it would be the other way around SLR01 as race and SLR02 as train?

The S2 still looks great as well.

_________________
2012 BMC SLR 6.02kg http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=110390


Top
   
PostPosted: Tue Nov 19, 2013 5:45 am 
Offline

Joined: Sat Jul 20, 2013 6:11 pm
Posts: 1010
Chorus cass 11-27t.. the 12-27 will now go on the wahoo kickr


Top
   
Posted: Tue Nov 19, 2013 5:45 am 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6099 posts ]  Go to page Previous 1252 253 254 255 256407 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Specialized just bought license for key patent from HED

in Road

53x12

6

1403

Wed Feb 24, 2016 10:45 pm

Skylark View the latest post

There are no new unread posts for this topic. Do you shorten the hose for disc brakes when they are bought

in MTB

stockae92

10

1204

Thu Dec 01, 2016 10:39 am

TheRookie View the latest post

There are no new unread posts for this topic. Enve Composites bought by Mavic parent company

[ Go to page: 1 2 3 ]

in Road

53x12

41

4173

Mon Feb 29, 2016 12:06 pm

sawyer View the latest post

There are no new unread posts for this topic. Legs topic

[ Go to page: 1 2 ]

in Training

Carlin

17

1980

Tue Mar 15, 2016 11:50 pm

motdoc View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: anodoze and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited