Prolite Cuneo
Moderators: MrCurrieinahurry, maxim809, Moderator Team
- theosaurus
- Posts: 108
- Joined: Mon Nov 07, 2011 8:02 pm
- Location: England
Here's my cuneo, currently at about 7.9kg (with cassette). It's sort of a secondary/ weight weenie race bike, so on a bit of a budget.
The target is sub 7kg, but I have no money atm. Looking for a cheap layback seatpost, any suggestions?
more to come...
Sorry for the shite photo
The target is sub 7kg, but I have no money atm. Looking for a cheap layback seatpost, any suggestions?
more to come...
Sorry for the shite photo
yes, but how much does it weigh?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- theosaurus
- Posts: 108
- Joined: Mon Nov 07, 2011 8:02 pm
- Location: England
Ah yes, there's no cassette in that Picture, but not for weight reasons
yes, but how much does it weigh?
-
- Posts: 61
- Joined: Mon Oct 31, 2011 9:51 am
- Location: NSW Australia
I like it! What bars are you using?
Sent from my iPad using Tapatalk HD
Sent from my iPad using Tapatalk HD
- theosaurus
- Posts: 108
- Joined: Mon Nov 07, 2011 8:02 pm
- Location: England
Thanks, the bars are fsa rd200, I got them for 20 quid of chain reaction and the only weigh 216g!
yes, but how much does it weigh?
-
- Posts: 61
- Joined: Mon Oct 31, 2011 9:51 am
- Location: NSW Australia
theosaurus wrote:Thanks, the bars are fsa rd200, I got them for 20 quid of chain reaction and the only weigh 216g!
Well done all round - that's good value for money. I like the look of the FSA classic bend - seems a fair bit deeper drop than the deda shallows. Might have to try them myself!
Yep, bike looks very, very classy with those wheels and components.
Sent from my iPad using Tapatalk HD
- theosaurus
- Posts: 108
- Joined: Mon Nov 07, 2011 8:02 pm
- Location: England
Just got my Cuneo frame back from shot blasting, not quite sure how to finish
A) just glass paper
B) steel wool
C) polish
D) ???
I would put a clear coat over any of these as I want a bare aluminium finish.
Of course the aim is 7.6kg going on 6.8kg. Open to suggestion/snooty comments
A) just glass paper
B) steel wool
C) polish
D) ???
I would put a clear coat over any of these as I want a bare aluminium finish.
Of course the aim is 7.6kg going on 6.8kg. Open to suggestion/snooty comments
yes, but how much does it weigh?
- theosaurus
- Posts: 108
- Joined: Mon Nov 07, 2011 8:02 pm
- Location: England
53x12: I think your right, I might just clear coat straight away it looks pretty good already
I think I only saved around 50 grams but I would predict a cyfac's paint is a bit heavier
I think I only saved around 50 grams but I would predict a cyfac's paint is a bit heavier
yes, but how much does it weigh?
- prendrefeu
- Posts: 8580
- Joined: Wed Oct 31, 2007 10:32 pm
- Location: Glendale / Los Angeles, California
- Contact:
Mask off a design, polish only that part, then clear coat.
Exp001 || Other projects in the works.
- theosaurus
- Posts: 108
- Joined: Mon Nov 07, 2011 8:02 pm
- Location: England
Progress...
yes, but how much does it weigh?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com