Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Mon May 30, 2016 6:18 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Anodized Cog Spacers?
PostPosted: Wed Aug 14, 2013 12:24 am 
Offline

Joined: Tue May 08, 2012 3:10 am
Posts: 112
Location: Santa Barbara
Has anyone come across anodized cog spacers for Shimano/SRAM 10-speed cassettes (or any cassettes for that matter). Just so it's clear, I'm talking about the 2.35mm (on Shimano/SRAM 10) spacers that fit between the smaller loose cogs.

_________________
FTWi CritBike


Top
   
PostPosted: Wed Aug 14, 2013 12:48 am 
Offline

Joined: Sat Jun 02, 2007 1:10 am
Posts: 1845
Location: Melbourne, Australia
2.35mm is not a standard material thickness so not so easy to make in small volumes. Shimano would have many economically viable methods to make these spaces at this thickness. They could reroll the sheet strips then punch the spacers out, or they could just forge them (less likely as wouldn't be as fast).

If you were to make them at low volume - you'd maybe have to mill down a 2.5mm sheet then laser cut? A lot of waste and work for a tiny low value part that not many people would likely want to pay even $1 each for.

OK sorry - no haven't seen them


Top
   
PostPosted: Wed Aug 14, 2013 12:51 am 
Offline

Joined: Fri Nov 10, 2006 6:23 pm
Posts: 290
whydobearsxplod wrote:
Has anyone come across anodized cog spacers for Shimano/SRAM 10-speed cassettes (or any cassettes for that matter). Just so it's clear, I'm talking about the 2.35mm (on Shimano/SRAM 10) spacers that fit between the smaller loose cogs.


I think you would be better off just prepping and spray painting the ones already on the cassette. It's not like they will be in contact with anything (on the top of the spacers) that may scuff them up. Sand them up, paint them, clear coat. I painted some hubs that way, they were not loose they were on a completely built wheel. 5 years later, no flaking, chipping, cracks.

_________________
http://ddubcustomsportswear.com


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Attachment(s) Red anodized Titanium?

in Road

verbs4us

13

1330

Thu Nov 26, 2015 6:30 pm

verbs4us View the latest post

There are no new unread posts for this topic. FSA Micro Spacers 1 1/4"

in Road

Winston

9

323

Wed Feb 17, 2016 11:45 am

kkibbler View the latest post

There are no new unread posts for this topic. Lightest headset spacers

in Road

HaakonJohansen

4

405

Mon Feb 22, 2016 2:08 am

Benno View the latest post

There are no new unread posts for this topic. Attachment(s) Spacers with small outer diameter?

[ Go to page: 1 2 3 ]

in Road

cdtf

39

1459

Thu Feb 25, 2016 3:52 pm

cdtf View the latest post

There are no new unread posts for this topic. Broken Campagnolo 11 speed spacers

in Road

phunky

8

690

Tue Jun 23, 2015 11:28 am

myungjinkim View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot], tonytourist, Yahoo [Bot] and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited