Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Mon May 30, 2016 2:17 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00




Post new topic  Reply to topic  [ 99 posts ]  Go to page Previous 13 4 5 6 7
Author Message
PostPosted: Fri Jul 12, 2013 2:37 pm 
Offline
in the industry
User avatar

Joined: Sun Jul 29, 2012 2:59 pm
Posts: 829
Location: Ruidoso, NM
You are right. It's been awhile since I've thought about this.

Which front hub pattern did I "pass along"? This one will work well for 20h, but I'm not seeing any good ones for 24h. viewtopic.php?f=3&t=91823&hilit=lacing+pattern#p790183

_________________
formerly rruff...


Top
   
PostPosted: Sat Jul 13, 2013 1:47 am 
Offline

Joined: Tue Sep 14, 2010 3:28 pm
Posts: 1405
You're right. It's been a while for me too since thinking about this stuff. The 20 hole patterns were what I was thinking of.


Top
   
PostPosted: Mon Jul 15, 2013 2:32 am 
Offline

Joined: Mon Jul 26, 2004 1:06 pm
Posts: 967
Location: Melbourne, Australia
Use the 36 hole hub. Lace it 2x both sides. Use 2.17 in the spoke calculation instead of 2.00. You skip every third hole. The spoke either side of the skipped hole angles towards that skipped hole.

_________________
Grover's Grumblings
Grover's Garage


Top
   
PostPosted: Mon Jul 15, 2013 3:24 am 
Offline

Joined: Wed Dec 01, 2010 4:29 am
Posts: 373
...


Top
   
PostPosted: Mon Jul 15, 2013 8:50 pm 
Offline

Joined: Tue Sep 14, 2010 3:28 pm
Posts: 1405
Grover-that will not work. Read threw the thread to see why.


Top
   
PostPosted: Tue Jul 23, 2013 1:29 pm 
Offline

Joined: Fri Dec 15, 2006 7:45 pm
Posts: 3934
Location: Natovi Landing
I had a wheel built by legs11 on this forum a few years back along these lines ...

- P-X 50mm carbon tubular rim with 24h drilling
- 32 hole Campagnolo Record hub

16 DS and 8 NDS, missing every other hole.

Worked absolutely fine. One concern was the drilling was offset alternately (i.e. 12 holes offset one way, 12 the next), making it sub-optimal as some of the DS spokes entered holes they shouldn't have. But it worked.

That said it wasn't as stiff as the straight build I did (same rim and spokes) with a DA hub 12 each side.


Top
   
PostPosted: Tue Jul 23, 2013 9:45 pm 
Offline

Joined: Tue Sep 14, 2010 3:28 pm
Posts: 1405
Yep, Triplet seems to work fine with 32 hole hubs. 24 hole patterns get complicated with a 36 though. Cryoplasm suggested an 18-6 early on, but my gut tells me that it wouldn't be suitable for anyone larger than a bantam weight.


Top
   
PostPosted: Wed Jul 24, 2013 12:14 am 
Offline

Joined: Mon Jul 26, 2004 1:06 pm
Posts: 967
Location: Melbourne, Australia
Bricky21 - because one side lines up perfectly and the other side is offset slightly? It just means the lead spokes are slightly shorter, the trail spokes are slightly longer...or vice versa depending on which way you build it. It's so minimal that it doesn't matter.

I've build a 36 hole Hope Pro 2 disc hub on a 24 hole Notubes Alpha 340 rim. I've been riding and racing cyclocross on it...that includes dirt road rides including water bars/getting airborne at 50-70km/h. I used the same spoke length for the lead and trail spokes on the slightly offset side. It's a little bit tricky to get even tensions as you can't just preset the depth of the nipples. Do a little fiddling, get even tension and you'll have a perfectly sturdy wheel build.

_________________
Grover's Grumblings
Grover's Garage


Top
   
PostPosted: Wed Jul 24, 2013 2:44 am 
Offline

Joined: Tue Sep 14, 2010 3:28 pm
Posts: 1405
Thing is there isn't any reason to use a spoke pattern that's out of phase when you can have a symmetrical 12/12 wheel with the pattern I drew up earlier. Lacing it 2 cross on both sides may be the only 24 spoke option the for a front wheel though.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 99 posts ]  Go to page Previous 13 4 5 6 7

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. American Classic Sprint 350's frozen spokes advice needed

in Everything wheels

oscarnz

2

115

Fri Mar 18, 2016 11:43 pm

Marin View the latest post

There are no new unread posts for this topic. 16 hole front hub

[ Go to page: 1 2 ]

in Everything wheels

fletch62

18

825

Mon Apr 11, 2016 10:50 am

sawyer View the latest post

There are no new unread posts for this topic. Nice rims in 24/28 hole

[ Go to page: 1 2 ]

in Road

0psi

17

1455

Mon Jan 04, 2016 11:05 am

austke View the latest post

There are no new unread posts for this topic. Hole in canyon headset

in Road

Panainz

10

998

Sun Feb 21, 2016 5:19 pm

Delorre View the latest post

There are no new unread posts for this topic. Attachment(s) looking for plastic spoke hole plugs

in Road

alanmclean

3

256

Sat Mar 05, 2016 3:29 pm

alanmclean View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: CBRE and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited