SRAM Red vs Red 22 Crankset
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- Frankie - B
- Admin - In the industry
- Posts: 6573
- Joined: Mon Jun 02, 2003 8:17 am
- Location: Drenthe, Holland
Please keep in mind that this community is global. the people 'in the know' might be asleep on the other side of our planet. They might be at work as well.
If you would be so kind to wait for 24 hours, that would be great.
Thanks
If you would be so kind to wait for 24 hours, that would be great.
Thanks
If you want to see 'meh' content of me and my bike you can follow my life in pictures here!'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'
I have extensive experience with the new 10s group and the yaw fd on the proper rings and the old version. to this point we have only done 1 11s group, which I didn't fit/tune.
I am guessing you are asking will 11s shifters/chain work with 10s crank/rings. I would say you will definitely be able to get a satisfactory result.
you might have to compromise and put up with some rub in the 39-11.
if there is any difference it will be in the chairing's only. worse case, try it, see if it works, buy the rings if needed.
I am guessing you are asking will 11s shifters/chain work with 10s crank/rings. I would say you will definitely be able to get a satisfactory result.
you might have to compromise and put up with some rub in the 39-11.
if there is any difference it will be in the chairing's only. worse case, try it, see if it works, buy the rings if needed.
The answer to your question is here, happy reading:
http://www.bikerumor.com/2013/04/15/sra ... rst-rides/
http://www.bikerumor.com/2013/04/15/sra ... rst-rides/
-
- Posts: 829
- Joined: Tue Jan 13, 2009 2:35 am
I'd be that VeloNews is going to do a compatibility test in the near future.
I'll add that I was told by someone with good knowledge of the products that the cranks are the same but the chainrings are slightly different, and it should be possible to swap 10-speed chainrings for 11-speed.
I'll add that I was told by someone with good knowledge of the products that the cranks are the same but the chainrings are slightly different, and it should be possible to swap 10-speed chainrings for 11-speed.
I have the new Red 22 110BCD rings on order. I will compare them to my existing Red 2012 rings. I'm upgrading to Di2 11-speed and I want to make sure I have the correct rings to match the 11-speed chain. They are special order items from my LBS however the price was reasonable for the set ($120).
-
- Posts: 17
- Joined: Thu Aug 11, 2011 11:10 am
And?
Is there any difference between the red 22/10 speed crank?
I wan't to buy a 22 red crank and use it with a 10 speed set-up.
Is there any difference between the red 22/10 speed crank?
I wan't to buy a 22 red crank and use it with a 10 speed set-up.
-
- Posts: 17
- Joined: Thu Aug 11, 2011 11:10 am
Thanks!
But the sram 22 rings won't work with the 10 speed red groep?
But the sram 22 rings won't work with the 10 speed red groep?
I recently upgraded from 10sp to 11sp and had both cranksets side by side. It was really hard to tell a difference. I took the rings off and tried to find thickness differences but didn't see anything. If there are difference they are very subtle.
-
- Posts: 17
- Joined: Thu Aug 11, 2011 11:10 am
Do you know if the gap between the inner and outher ring is the same?
However, the spider’s tab thickness on the crankset is the same, so all of the spacing difference is in the rings. This means you can put new 11-speed rings on the 2012 Red 10-speed cranksets.
From that Bike Rumor article. That's good news, because the 22 seem to be more available than the 10-speed version. No idea why. Going to pick these up and swap the rings for Extralites.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com