Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Wed Aug 23, 2017 3:53 am

All times are UTC+01:00





Post new topic  Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Fri Jul 19, 2013 10:25 am 
Offline
User avatar

Joined: Tue Aug 08, 2006 1:41 pm
Posts: 853
Location: The Netherlands
Hi guys,

I am planning on doing something of an 'all road' road/cx build in the near future and I am currently thinking about options for the drive train. Although I wasn't a big fan of disc brakes on road bikes at first, it does seem to make sense to use them on an road/cx bike. Definitely now both SRAM and Shimano have come out with hydraulic levers.

Since I would like to keep my drivetrain mechanical (at least for now), SRAM hydralic levers are the way to go. Unfortunately SRAM road shifters don't work with their mountain bike derailleurs, due to different pull ratios. If I am correct, Shimano Dynasys derailleurs do use the same pull ratio (1:1) as SRAM road shifters. Does this mean it is possible to combine the two? I suppose it isn't possible to mate Shimano XTR disc calipers to SRAM hydralic road shifters, right?

Thanks!

_________________
My Renovo R1 wooden bike project and the reason for my passion for all that is wood.

Check it out: the most amazing vintage Colnago, Merckx and Pinarello collection


Top
   
Posted: Fri Jul 19, 2013 10:25 am 


Top
   
 
PostPosted: Fri Jul 19, 2013 1:23 pm 
Offline
User avatar

Joined: Tue Jan 23, 2007 12:36 am
Posts: 173
Location: Belgium
They don't mix.
Avid: dot oil
Shimano: mineral oil


Top
   
PostPosted: Fri Jul 19, 2013 2:27 pm 
Offline

Joined: Fri Aug 31, 2012 6:32 pm
Posts: 406
SRAM mountain and road derailleurs ARE interchangeable (10s anyway, not sure about 11s). Shimano's 10s aren't. I think their 9s might be though?


Top
   
PostPosted: Fri Jul 19, 2013 5:01 pm 
Offline

Joined: Thu Jan 26, 2006 6:01 pm
Posts: 1723
Just to reiterate: 1. Sram and shimano hydro systems aren't compatible. 2. Sram MTB and Road 10 speed ders work interchangeably. (a big plus over shimano, ATMO)


Top
   
PostPosted: Sat Jul 20, 2013 1:22 am 
Offline

Joined: Mon Jul 26, 2004 1:06 pm
Posts: 1067
Location: Melbourne, Australia
You're better off using a WiFli road rear derailleur. These have the capacity for a 32T cassette cog. While in theory SRAMs 10 speed MTB derailleurs should work with their 10 speed road shifters in practice they're just not 100%. Unless you really want to use a 34 or 36 tooth cassette just use a WiFli derailleur.

_________________
Grover's Grumblings
Grover's Garage


Top
   
PostPosted: Sun Jul 21, 2013 1:08 am 
Online

Joined: Tue Apr 22, 2008 4:31 am
Posts: 329
Briscoelab wrote:
Just to reiterate: 1. Sram and shimano hydro systems aren't compatible. 2. Sram MTB and Road 10 speed ders work interchangeably. (a big plus over shimano, ATMO)


That can be easily remedied though if you are determined.

I have just swapped over the seals in a pair of Avid X0 Trail calipers so they are compatible with Mineral oil. Pretty simple really and found a local supplier that will make custom seals pretty cheap.

Biggest thing to determine though is the relative sizes of the caliper pistons and master cyl piston sizes, so they match properly and will have the same function curve.


Top
   
PostPosted: Tue Jul 23, 2013 4:16 pm 
Offline

Joined: Fri Mar 24, 2006 1:26 pm
Posts: 2529
FWIW, SRAM road shifters do NOT have a 1:1 pull ratio. They pull 3mm of cable for every shift and that produces a RD travel of 3.95mm.


Top
   
PostPosted: Tue Jul 23, 2013 5:31 pm 
Offline

Joined: Thu Jan 26, 2006 6:01 pm
Posts: 1723
Along DaveS's lines, the Sram 9 speed MTB parts were 1:1. The new stuff is the same as their road system.

I've used X0 and X9 type 2 rear ders on CX bike setups (for better chain retention) with zero issues. The short cage ones work great, but do require a bit more lever force.


Top
   
PostPosted: Tue Jul 23, 2013 10:17 pm 
Offline
User avatar

Joined: Tue Aug 08, 2006 1:41 pm
Posts: 853
Location: The Netherlands
I am just thinking out loud here, but do you think it is possible to combine the new SRAM 22 shifters to a SRAM X11 rear derailleur?

If I could get my hands on a 48 or 50 single speed chain ring, that would mean I could have the same gear ratio with 1 front ring, compared to a normal 2 ring setup...

_________________
My Renovo R1 wooden bike project and the reason for my passion for all that is wood.

Check it out: the most amazing vintage Colnago, Merckx and Pinarello collection


Top
   
PostPosted: Tue Jul 23, 2013 11:57 pm 
Offline

Joined: Mon Jul 26, 2004 1:06 pm
Posts: 1067
Location: Melbourne, Australia
Briscoelab wrote:
Along DaveS's lines, the Sram 9 speed MTB parts were 1:1. The new stuff is the same as their road system.

I've used X0 and X9 type 2 rear ders on CX bike setups (for better chain retention) with zero issues. The short cage ones work great, but do require a bit more lever force.


What cassette range have you used with these setups? I'm wondering if you've had ok shifting with type 2 mtb derailleurs on cassettes with biggest cog 26/27/28.

_________________
Grover's Grumblings
Grover's Garage


Top
   
Posted: Tue Jul 23, 2013 11:57 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 10 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. SRAM Red chainring compatibility with Shimano 9150 Di2

in Road

bpe

3

278

Sat Jul 08, 2017 4:53 am

pdlpsher1 View the latest post

There are no new unread posts for this topic. sram mechanical vs hydro road shifter/hood length?

in Road

motorthings

0

81

Thu Aug 17, 2017 11:55 pm

motorthings View the latest post

There are no new unread posts for this topic. Shimano Hydraulic Brake Issue

in Road

CallumRD1

4

390

Wed Jun 14, 2017 1:25 am

CallumRD1 View the latest post

There are no new unread posts for this topic. Attachment(s) Bleed screws in Shimano hydraulic levers

in Road

lovemyway

4

183

Thu Aug 10, 2017 3:36 pm

lovemyway View the latest post

There are no new unread posts for this topic. Campy Potenza Shifter compatibility

in Road

nthanach

9

697

Thu Jun 08, 2017 8:32 pm

kervelo View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot], mogwaiboi and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited