Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Mon Nov 20, 2017 8:19 pm

All times are UTC+01:00





Post new topic  Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Fri Jul 19, 2013 8:50 pm 
Offline

Joined: Sat Feb 07, 2009 5:52 am
Posts: 561
I've got an old Cannondale System Six that I like in every respect save one - the rear brake bridge is so low that it traps debris between the tire and the brake on rides when using my preferred 25mm tires. Twice yesterday I had to stop and roll the bike backwards to clear out the debris.

So the question - has anyone ever tweaked the brake bridge on an aluminum bike, for whatever reason, and had it live? I know that it's theoretically not a great idea to yield aluminum and rely on its strength afterwards. But if I could move it up 1-2 mm, it would make a big difference in its ability to handle road debris.

TIA.


Top
   
PostPosted: Fri Jul 19, 2013 10:10 pm 
Offline

Joined: Tue Nov 11, 2003 9:47 pm
Posts: 2196
Location: Santa Cruz, California, USA
Bending that short a piece of heat treated aluminium far enough to make a difference seems dodgy.
Is there material on the bottom that doesn't look too structural and can be removed?

You could try shorter tires. Tires of the same nominal size vary quite a bit.


Top
   
Posted: Fri Jul 19, 2013 10:10 pm 


Top
   
 
PostPosted: Fri Jul 19, 2013 10:49 pm 
Offline
User avatar

Joined: Fri Feb 11, 2011 3:04 am
Posts: 2693
Location: Mississippi
Not knowing what wheels you are running...a wider rim may reduce the effective height of a 25c tire, maybe? Bending the bridge sounds dodgy, for sure...

_________________
Mosaic RS-1
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478

Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376


Top
   
PostPosted: Fri Jul 19, 2013 11:00 pm 
Offline
User avatar

Joined: Sat Nov 14, 2009 6:30 am
Posts: 877
Location: So Cal
Assuming it don't crack before you get any significant clearance...how would you bend it evenly so that the brake stays centered?


Top
   
PostPosted: Sat Jul 20, 2013 12:14 am 
Offline

Joined: Fri Aug 20, 2010 3:49 pm
Posts: 15
spud--check out this post: http://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=117392&start=15#p1001652

from mickey:
Image


Top
   
PostPosted: Sat Jul 20, 2013 5:08 pm 
Offline

Joined: Sat Feb 07, 2009 5:52 am
Posts: 561
I'm on wide rims already, and it's not so much the brake bridge itself that is the immediate problem, it's the caliper. I probably have 2-3 mm clearance on the bridge, and about 1 mm on the caliper.

Rewelding the bridge is a possibility, but I'd rather not repaint the frame as it's 7 years old.

If I bend and it's not quite centered, that can be compensated for at the brake caliper. But I'm not leaning that way at the moment, unless I hear from a builder that it can be slightly bent without issue.


Top
   
PostPosted: Sat Jul 20, 2013 6:04 pm 
Offline

Joined: Thu Jan 03, 2008 6:14 am
Posts: 1340
Location: by Crystal Springs (Sawyer Creek Trail)
Steel can be bent, Aluminum? I would definitely not go there... Sounds like a place for an huge stress riser.

I know a friend who filed down the underside of his brake caliper just a little to get more clearance. Would that be possible or even safe (along the lines of drillium)?


Top
   
PostPosted: Sat Jul 20, 2013 6:05 pm 
Offline
User avatar

Joined: Wed Oct 31, 2007 10:32 pm
Posts: 8490
Location: Los Feliz, Los Angeles, California
Just remove it completely and save some weight. :twisted:
But post pictures of the bridge on a scale, please.

_________________
Exp001 || Other projects in the works.


Top
   
PostPosted: Sat Jul 20, 2013 6:29 pm 
Offline

Joined: Tue Nov 11, 2003 9:47 pm
Posts: 2196
Location: Santa Cruz, California, USA
If it's the caliper that is the problem you have more options.
You can use an offset caliper mounting bolt.
Or file the bridge mounting hole a little so you can slide the mounting bolt up.
Or get a different caliper that has more clearance.
Or take a file to the caliper you have.


Top
   
Posted: Sat Jul 20, 2013 6:29 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. C60: rear brake cable in the top tube

in Road

TonyM

6

581

Sat Sep 16, 2017 6:52 pm

Zakalwe View the latest post

There are no new unread posts for this topic. Caad12 rear brake guide missing?

in Road

Nejmann

8

428

Sun Sep 10, 2017 2:08 am

TarugoKing View the latest post

There are no new unread posts for this topic. Ciamillo rear brake servicing - removing excess play

in Road

Slimtim

7

952

Wed Dec 21, 2016 4:08 pm

Slimtim View the latest post

There are no new unread posts for this topic. Can a Campy Record 10-speed rear brake/shift unit be converted to

in Road

Catagory6

13

480

Wed Sep 27, 2017 1:09 am

bikerjulio View the latest post

There are no new unread posts for this topic. REAR HUB ZIPP 188

in Road

nick007

4

413

Thu Aug 24, 2017 9:20 am

kavitator View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: agfu, antonioiglesius, BeeSeeBee, Bing [Bot], wobbly, wpccrunner and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited