Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun Jun 26, 2016 6:14 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Scott steerer plug?
PostPosted: Wed Jul 17, 2013 10:16 pm 
Offline
User avatar

Joined: Fri Apr 12, 2013 1:19 pm
Posts: 742
Location: South West England
Not seen one like this before I got the bike, it's an older ('09) Scott CR1.
What do I do with this when cutting the steerer? I've only used regular
compression plugs before which are obviously much easier...

Image

_________________
Scott CR1 - 7.1kg - cracked
BMC SLR02 - 7.6kg - cracked too...
Kinesis Aithein - 6.9kg - hit by car!

MASON Definition | Camapgnolo Chorus/Potenza | TRP Spyre SLC | Novatec CXD - TBC


Top
   
 Post subject: Re: Scott steerer plug?
PostPosted: Wed Jul 17, 2013 10:43 pm 
Offline

Joined: Sun May 16, 2010 7:28 pm
Posts: 814
A hex key should loosen that guy up for you to remove...


Top
   
 Post subject: Re: Scott steerer plug?
PostPosted: Wed Jul 17, 2013 10:47 pm 
Offline
User avatar

Joined: Fri Apr 12, 2013 1:19 pm
Posts: 742
Location: South West England
Ah okay. Don't have one big enough so I'll ask around and see what I can do. Thanks!

_________________
Scott CR1 - 7.1kg - cracked
BMC SLR02 - 7.6kg - cracked too...
Kinesis Aithein - 6.9kg - hit by car!

MASON Definition | Camapgnolo Chorus/Potenza | TRP Spyre SLC | Novatec CXD - TBC


Top
   
 Post subject: Re: Scott steerer plug?
PostPosted: Thu Jul 18, 2013 3:25 pm 
Offline

Joined: Mon Jan 24, 2011 8:09 pm
Posts: 901
Yes, there are actually two hexes. The smaller one down further in the compressor, that is the one that actually controls the compression piece.

Then that bigger diameter one, I think it is like 8mm if I recall. For the top portion. You want to loosen the top/bigger one first, then the bottom compression piece.

The top piece which screws into the lower compression portion doesn't go down into the tube at all as you can see, designed to sit on the top lip.

Install the opposite. Get the bottom/smaller hex and compression set so it just touches the fork tube. Lower it down and start to tighten it at the depth you want, then tighten it up.

Then screw the top portion down and tighten with the bigger hex. Now you can screw the top cap through to the compression portion to tighten the headset up to desired level.

Real simple once you get the right hex wrench sizes for the job.

Good luck.


Top
   
 Post subject: Re: Scott steerer plug?
PostPosted: Thu Jul 18, 2013 3:55 pm 
Offline
User avatar

Joined: Fri Apr 12, 2013 1:19 pm
Posts: 742
Location: South West England
Thanks, will source some tools and post results.

_________________
Scott CR1 - 7.1kg - cracked
BMC SLR02 - 7.6kg - cracked too...
Kinesis Aithein - 6.9kg - hit by car!

MASON Definition | Camapgnolo Chorus/Potenza | TRP Spyre SLC | Novatec CXD - TBC


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Di2 7970 battery plug wiring

[ Go to page: 1 2 ]

in Road

drmutley

16

806

Wed Aug 19, 2015 3:29 pm

drmutley View the latest post

There are no new unread posts for this topic. Bar/stem combo for 1.25" steerer?

in Road

kkibbler

2

336

Mon Feb 29, 2016 11:24 am

romalor View the latest post

There are no new unread posts for this topic. MCFK Steerer for Lefty on New Cannondale Slate

in Road

Snicks

7

702

Sat Dec 12, 2015 2:49 pm

morrisond View the latest post

There are no new unread posts for this topic. Broken steerer tube - result of a crash or not?

in Road

mrlobber

10

830

Mon Sep 07, 2015 9:23 am

mrgray View the latest post

There are no new unread posts for this topic. Attachment(s) Damaged fork steerer crown. Should I replace it?

in Road

isharamet

4

466

Mon Aug 03, 2015 7:54 am

isharamet View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Conradsleight, MSNbot Media, Yahoo [Bot] and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited