Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sat Dec 03, 2016 1:41 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

All times are UTC+01:00

Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Thu Jul 11, 2013 6:39 pm 

Joined: Thu Jul 11, 2013 6:27 pm
Posts: 5
I have a 16 hole rim and 32 hole hub for a wheel build that is driving me bananas. I thought that it would be simple matter of just skipping every other hole in the hub.

Whilst one side of the wheel builds ok, the other side doesn’t whether I use every other hole, pair the holes and skip two or whether I swap heads in or out. Whichever I use, half the spokes on the “second” side are too long, half are too short and the triangle formed by the one cross is not symmetrical.

I’m guessing it’s because the offset of the holes between flanges is different between a 16 hole hub and a 32.

Has anyone tried this before? Is it possibe to lace satisfactorily if I try new spoke lengths (for the third time).

Does anyone have any ideas how to adjust the standard spoke length formula for this. If not I’m guessing that the standard calculator is good for one side but for the other I’ll need to adjust that length up to 4mm plus and minus.

Many thanks

PostPosted: Fri Jul 12, 2013 12:59 am 

Joined: Tue Sep 14, 2010 3:28 pm
Posts: 1405
It should work. Any photos, or more information as to the hub, and rim being used?

Posted: Fri Jul 12, 2013 12:59 am 

PostPosted: Thu Jul 18, 2013 3:43 pm 
in the industry

Joined: Sat May 12, 2012 7:25 pm
Posts: 2818
Location: Glermsford, Suffolk U.K
Do you have paired drilled rim as that would cause an issue. You have made some sort of error as it should work.


PostPosted: Fri Jul 26, 2013 10:01 pm 

Joined: Wed Feb 03, 2010 1:31 am
Posts: 535
Not sure its much help or not. But I have a Campagnolo Shamal 12 spoke front rim laced to a Veloce 36 spoke hub. Radial lacing. Can't recall how I determined spoke length. Measured the old factory spokes or just guessed with different lengths.

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Cheapskate 3-hole to 2-hole shoe conversion

in Cycle Chat




Thu Jul 21, 2016 12:01 pm

WannabeWeenie View the latest post

There are no new unread posts for this topic. Attachment(s) DT Swiss Carbon rim little hole??

in Everything wheels




Thu Sep 22, 2016 4:11 am

sp3000 View the latest post

There are no new unread posts for this topic. Attachment(s) looking for plastic spoke hole plugs

in Road




Sat Mar 05, 2016 3:29 pm

alanmclean View the latest post

All times are UTC+01:00

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited