SRM question

A light bike doesn't replace good fitness.

Moderator: Moderator Team

Post Reply
Posts: 409
Joined: Sun Jul 22, 2007 1:39 pm

by Peter_E

Hi all, I have a wired SRM and a PcV. When you finish an interval by pressing set-button you see average values on the screen for a while. Those values are mostly slightly lower than the ones I get when I connect the PcV to the computer. There is a difference of 5-10 watts maybe. Anybody know why?
Grateful for any input.

by Weenie

Resident master of GIF
Posts: 3173
Joined: Mon Jul 18, 2011 2:44 am

by nathanong87

one is normalized power vs average power

"Normalized Power is a better indicator of the true metabolic demands of your ride than average power. Basically, it's the wattage you would have averaged if you had pedaled smoothly for the entire effort/ride- the power that your body "thought" it was doing"

Posts: 1491
Joined: Wed Dec 15, 2004 10:54 am
Location: Melbourne, Australia

by Dalai

nathanong87 wrote:one is normalized power vs average power

Depends where Peter_E is uploading the data... If using the SRM software, this won't be it as their software doesn't calculate normalized power.

Interesting question that I am sure have seen possibly answered in the Google Wattage group. Will have a search there over lunch today.

Posts: 409
Joined: Sun Jul 22, 2007 1:39 pm

by Peter_E

I am using SRMwin so no, normalized power should not be the explanation. Some further googleing has led me to believe that it is the smoothing settings.meaning that the PcV and the software smooths power differently.

Skickat från min MT15i via Tapatalk 2

Post Reply
  • Similar Topics
    Last post