FRAME & FORK ONLY

NEW PRICE!.....I have too many bikes. It, unfortunalty, needs to go.

This is a Z3 that was purchased in 2009. It has been WELL TAKEN CARE OF. I have had up to three different bikes, so that tells you how much each may have been used.
It has never been ridden in winter or bad weather (I think the rain once, really).
It has never been crashed. The specifics:

--It's basically a size 56 with standard HT & ST angles.

-Custom size (but basically a 56 top-tube) (geometry below)
-Unidirectional tubing
-Unidirectional lugs ($500 extra when it was purchased )
-SL (superlight) tube-set.
-Ti-rear drop-out
-Standard BSA bottom-bracket
-ENVE fork (sterer tube lenght to fit the 169 head tube + stem + about 15mm of spacers)(see photo)
-Red decals with white outline
-NEVER crashed
-Frame weight is about 1030gm
-I believe the "Lifetime Warrentee" is transfereable, but you can check with Parlee.
-There are only a few niks and scrapes, it's used,....but it's in pretty great condition.

--This bike was $7000 (frame/fork) purchased as a local bike shop.
But for reference:
http://www.wrenchscience.com/road/frame ... e/Z3/2012/" onclick="window.open(this.href);return false;

Geometry:
-TT (horizontal/virtual)= 56.3
-TT slope= 7 degrees
-HT = 169mm
-HT = NOT tapered, it is the standerd for a standard fork (1.125)
-HT extension (how high above the TT does the HT extend) = 18mm
-HT angle = 73.5
-ST angle = 73.5
-ST length (c-c) = 500mm
-ST length (c-t) = 570mm
-BB drop = 70mm
-Chainstay length = 410mm
-fork rake = 43
-seat tube diameter for seatpost = 31.6
-drop-out to drop-out = 991mm
I cant think of, or find anymore numbers to list.

This is a $7000 frameset

I am asking $1200 (frame/fork) + paypal fees + shipping ($80)

I also have an:
-Extralight Headset, 61 gm, used barely (if wanted) for $50
-Chris King Headset, black, used barely (if wanted) for $50
-A set of used (virutally new) Alligator iLinks cables & housing that is fitted for this frame ($50)
-Mcfk carbon seatpost collar, matching red bolts (if wanted) for $40
(this seatpost collar usually has to be custom orded becasue it is, non-standard 36.6mm diameter)

-(bike is 11.9 lb as shown)

-Paypal only
-Lower 48 United States only