Favorite CX Crankset?

The spirit of Grav-lo-cross. No but seriously, cyclocross and gravel go here!

Moderator: Moderator Team

Briscoelab
Posts: 1513
Joined: Thu Jan 26, 2006 6:01 pm

by Briscoelab

ahumblecycler wrote:I used a 44/38 this season, and I only used the 44 for flatter, grassier courses. I liked the set up because I still had two options but less chain length (i.e., less chain slap). I used a 12-27 cassette.


Smart man :)

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



tonytourist
Posts: 1426
Joined: Sat Oct 10, 2009 7:13 am
Location: 90039

by tonytourist

If I raced cross I would definitely consider doing the 1x10 setup with a 42 and 11/28 8)

Frans
Posts: 546
Joined: Wed Jan 25, 2006 8:32 pm
Location: Bow of a Farr 40

by Frans

The problem with 1 ring is how to keep the chain from unshipping and the inevitable thought process. This is how it went for me:

- You can buy all sorts of gizmos to keep a chain on a chainring
- When I looked at them they are rather expensive and specific and limit flexibility (more on that in a second)
- also, when you weigh up the add-ons and doo-dads and compare that with a 103gram Shimano CX70 front mech, it's a wash to me
- eventually I had 3/4 front mechs lying around so you can guess what I settled on for my chain-keeper
- I love my CX bike (Giant TCX - the slightly more racy one with the smooth welds, carbon fork and no eyelets, as opposed to the OEM frame) b/c it's so polyvalent - when I'm not racing I take it touring to France or ride the local MTB trails, so I actually want 2 rings.
- so after racing most of the season on a 1 x 9 with a front mech as chain keeper (not hooked up to the STI, I never cabled it) when it became clear I needed more firepower i.e. a bigger ring it was natural to cable up the front mech and I've never looked back. Having 2 rings is more flexbile depending on the course. I don't live in Denmark or Holland: in some of our races we do almost 400-500 meters of climbing in 1 hour, I can post the Garmin traces. So the 42x12 was not enuf, I can't spin at 120 and my power delivery becomes a less punchy above 100 rpms. And given the weight is not a big deal, it really isn't - Stybar's on a alu frame for pete's sake, as long as you don't make poor shifting choices, then 2 rings are pretty ideal.

mcatano
Posts: 32
Joined: Mon Aug 16, 2010 4:17 pm

by mcatano

White Industries VBC cranks are beautifully made, lightweight, still, durable, made by a bunch of nice folks in California, and allow for an almost infinite combination of chainrings. They have an exceptionally low q-factor if you're into that sort of thing. Unless you have an irrational hatred for square taper, they're a great choice, IMO.

Post Reply