Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Mon Dec 05, 2016 4:09 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Sat Nov 19, 2011 9:47 pm 
Offline
User avatar

Joined: Wed Feb 25, 2009 7:58 pm
Posts: 323
Location: Lancaster, UK
Not for CXing but for my 700c disc'd commuter.

Just been looking for some new wheels and tempted by some of the lighter 29er wheels (eg. Crest on Pro2 EVO) but the rims are a tad wide for road tyres, even the 28mm I commute on. FSA used to do some 700c disc wheels and Mavic has the Speedcity.

So.... are there any mid price* 700c disc wheels out there yet......? [clincher, 6-bolt]

or is it handbuilt time?

* shall we say sub £300...ish


Top
   
Posted: Sat Nov 19, 2011 9:47 pm 


Top
   
 
PostPosted: Sun Nov 20, 2011 3:05 pm 
Offline
User avatar

Joined: Wed Feb 25, 2009 7:58 pm
Posts: 323
Location: Lancaster, UK
that many eh? :wink:


Top
   
PostPosted: Mon Nov 21, 2011 10:14 pm 
Offline

Joined: Wed May 24, 2006 6:25 pm
Posts: 1402
130 or 135mm rear hub?

_________________
"Nothing compares to the simple pleasures of a bike ride," said John F. Kennedy, a man who had the pleasure of Marilyn Monroe.


Top
   
PostPosted: Tue Nov 22, 2011 11:48 am 
Offline
User avatar

Joined: Wed Feb 25, 2009 7:58 pm
Posts: 323
Location: Lancaster, UK
135

I've found a few:

Mavic Speedcity (already mentioned) - CRC had them on offer recently... http://www.bikeradar.com/gear/category/ ... set-13993/

Reynolds Assault CX
http://road.cc/content/image/42324-reyn ... ault-cxjpg

Stans: not sure if you'd call this a factory wheel but Stans Alpha on ZTR hubs
http://www.jensonusa.com/store/product/ ... LUK&cc=GBP

FSA RD-460 - discontinued but there may be the odd pair floating about

Williams - never heard of them and they don't look cheap
http://www.bikeradar.com/news/article/w ... ook-28356/

and then you've got a load of 29er wheels which aren't quite right, as I've mentioned.


Top
   
PostPosted: Tue Nov 22, 2011 5:54 pm 
Offline
Shop Wrench
User avatar

Joined: Sat Nov 29, 2008 6:15 am
Posts: 745
Location: Colorado
Just do hand built. Use a Mavic tn719 and pick your hub. Maybe look for a sale on cross max 29ers? They have some of the narrowest rims around. The older Easton xc one or xc two 29 have narrow rims as well.

_________________
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction."


Top
   
PostPosted: Wed Nov 23, 2011 5:44 pm 
Offline
User avatar

Joined: Wed Feb 25, 2009 7:58 pm
Posts: 323
Location: Lancaster, UK
cheers 743

I've just been reading about the Zipp firecrest rims and they run much wider rims than conventional 700c rims - I've seen comments say they are 25mm and the rim bead! This is even wider than most XC-type 29er rims (Stans Crests are 21mm), which makes me think that maybe the 29er route is the way to go. If the Zipps are fine with 23 or 25mm road tyres then so will the Crest rim.

Will read more.

PS Bonty do some 29er wheelsets too: 3 Race Lite versions


Top
   
PostPosted: Sat Dec 10, 2011 6:45 pm 
Offline
User avatar

Joined: Wed Feb 25, 2009 7:58 pm
Posts: 323
Location: Lancaster, UK
just an update...

Bought a front 29er Stans Crest on Hope EVO hub in the end and rode it today with a 28mm Conti GP4Season. Works fine.

Tried to fit a Hutchinson Intensive tubeless but it was just too tight so went for the clincher Conti instead. I could have got it on but I'd be in trouble out on the road if I got a terminal puncture and needed to fit a tube, so I went for the safer option instead.

I'll probably do the rear wheel like this next - Crest+Hope+GP4Season. Should be a good commuting setup I think. Disc braking on the front - what a relief! Power, feel, oh yes...


Top
   
PostPosted: Sun Dec 11, 2011 1:20 am 
Offline
User avatar

Joined: Thu Dec 08, 2011 4:08 pm
Posts: 14
Location: Mountains of Utah
I have been very tempted to get the Crest for my next CX disc build. I also want to run 28c tires during summer, but the Crest has a 21mm internal width, and a 60 psi max. If you run tubes, don't you worry about pinch flats? That is the only thing keeping me from the same setup, though I would love to use the same wheels on a 29er for racing.

_________________
SkidMap.Com
2011 Cannondale Scalpel
2010 Giant TCR Advanced SL
1943 Sieber Track Bike


Top
   
PostPosted: Sun Dec 11, 2011 10:34 pm 
Offline
User avatar

Joined: Wed Feb 25, 2009 7:58 pm
Posts: 323
Location: Lancaster, UK
I've seen the max psi thing with Crests but I've also heard reports of people running 80+ psi without any issues so I took the limit with a pinch of salt. I'm currently running 80psi in my GP4Season (with a tube) and they've been okay so far, on the two road rides I've done. Obviously if they fall apart then I'll probably re-assess my pholosphy of salt usage....


Top
   
PostPosted: Thu Dec 15, 2011 2:03 pm 
Offline

Joined: Wed Feb 02, 2011 3:48 am
Posts: 1447
60 psi limit (or whatever it is on a Crest) is tubeless only AFAIK. Run whatever pressure you like with tubes!


Top
   
PostPosted: Thu Dec 15, 2011 8:30 pm 
Offline
User avatar

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 1921
Location: Houston, Texas
From a 'price is no object' standpoint, seems like a set of Enve 29er tubulars laced 24/24 to DT240 would make for a really nice set of CX race wheels and the carbon clinchers for all-purpose/training. Unfortuantely for most of us, price is a consideration as that combo is very pricey at $2450 retail direct from Enve.

_________________
Michael - The Anaerobic Threshold is neither...


Top
   
Posted: Thu Dec 15, 2011 8:30 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Which disc wheels for my bike?

in Everything wheels

kakan

0

182

Tue Jul 05, 2016 12:32 pm

kakan View the latest post

There are no new unread posts for this topic. Light disc wheels

in Everything wheels

FHKJ

9

688

Mon Oct 31, 2016 8:32 am

bm0p700f View the latest post

There are no new unread posts for this topic. Attachment(s) Enve 3.4 Disc wheels (less than 100 miles)

in For sale - Pictures are mandatory 22-3-13

mnmasotto

0

245

Sat Sep 17, 2016 10:54 pm

mnmasotto View the latest post

There are no new unread posts for this topic. light and cheap carbon disc wheels

in Road

ourmanflint

10

893

Mon Apr 04, 2016 3:36 pm

ourmanflint View the latest post

There are no new unread posts for this topic. Fuji SL 1.1 Disc or Cannondale Synapse Hi Mod Disc or any other Disc Frame under 2000 dollars

in Road

vanmatthew

3

365

Fri Nov 18, 2016 9:34 pm

mpulsiv View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited