Bottom Bracket

The spirit of Grav-lo-cross. No but seriously, cyclocross and gravel go here!

Moderator: Moderator Team

Post Reply
WorkonSunday
Posts: 540
Joined: Tue Jan 16, 2018 4:39 pm

by WorkonSunday

Hi all,

I have a Colnago A1r CX. It came with a FSA Omega chainset. While i was riding today about 2 miles in, the non-drive side pedal fell out..... :noidea: on closer inspection (see pic), somehow the pedal threads stripped the crank arm side thread to bare..... when i look at the pedal side the treads are completely untouched, as good as new..... needless to say i need a replacement. There is very little information on the internet about this bike (2017 model), but from what i can gather the bottom bracket is BB30 press fitted (see pics). Am i right to assume that as long as i get another chainset that is BB30, then it will fit without needing to change the bottom bracket? (I'm thinking upgrading instead of getting another crank arm).
thanks in advance :beerchug:
Damaged crank
bottom bracket 1
bottom bracket 2
Some say pour 10ml water out of your bottle to save that last bit of the weight. Sorry, i go one step further, i tend to the rider off my bikes. :thumbup:
n+1...14 last time i checked, but i lost count :mrgreen:

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Post Reply