So: nearly complete.
I'm missing the rotors, rotor bolts. I have yet to fit the chainrings, chain and bolts. Also bar tape.
The build and weights so far are as follows:
Frameset Boardman cxr 9.8 small (QR version) 1125g inc headset
Fork 542g inc expander
Headset - top race 12g, bottom bearing 31g, spacers 18g, top cap bolt 6g, carbon top cap 6g.
Seatpost clamp 12g
Seatpost - USE alien 27.2 150g plus shim (27.2 to 31.6) 43g
Saddle - SLR 157g
BB Rotor 4630 106g
Chainset Rotor 3D+ 172.5mm compact 473g inc end cap bolt
Chainset axle spacers - Rotor - 19g
Pedals - XTR SPD 302g
Stem - Bontrager RXL 100mm 7deg 123g
Bars - 3T Ergoterra team 42-45 (CX) 188g
Shifters - SRAM Red 10s - 317g inc hoods
Rear mech - SRAM Red 10s - 144g
Front mech - SRAM Red 34.9 band on (alloy bolts) 82g
Front mech adaptor (top pull) - 21g
Cassette - DA 7900 10s 11-25 - 178g
Cables:
Rear mech outer 53g - innner
Rear brake outer 73g - inner 24g
Front gear outer 30g - inner
Front brake outer 44g - inner 14g
Wheelset:
Kinesis crosslight & tube & Crosswolf 700x32 front 1201g rear 1355g
Building a Boardman CX
Moderator: Moderator Team
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Good spot. Spyres are 320g.
Bar tape roughly 50g (I will weigh!)
Skewers are planet x ti 43g (arrived today).
Awaiting: rotors (ashima 73g x 2); Spyre mounting bolts x4; disc mounting bolts x 12; chain; rings; chainring bolts.
Bar tape roughly 50g (I will weigh!)
Skewers are planet x ti 43g (arrived today).
Awaiting: rotors (ashima 73g x 2); Spyre mounting bolts x4; disc mounting bolts x 12; chain; rings; chainring bolts.
Look 695 aerolight eTap 11
Boardman TTE eTap 11
Brompton S2 LX ti custom
Trek 5500 1994 Sram Red 10
Boardman CXR9.8 eTap 11
Open UPPER - DA 9270
Ridley x-fire Sram Red 10
and lots of non- WW others.
Boardman TTE eTap 11
Brompton S2 LX ti custom
Trek 5500 1994 Sram Red 10
Boardman CXR9.8 eTap 11
Open UPPER - DA 9270
Ridley x-fire Sram Red 10
and lots of non- WW others.
AdyM wrote:Just added all that up to 6849g, wow. So add rotors, bolts, rings, chain and tape, maybe +500g? wow.
I'm estimating the build will finish up at a smidge under 7.5kg (without pedals).
I'm still waiting for a few items - hopefully next weekend I can finish off.
Look 695 aerolight eTap 11
Boardman TTE eTap 11
Brompton S2 LX ti custom
Trek 5500 1994 Sram Red 10
Boardman CXR9.8 eTap 11
Open UPPER - DA 9270
Ridley x-fire Sram Red 10
and lots of non- WW others.
Boardman TTE eTap 11
Brompton S2 LX ti custom
Trek 5500 1994 Sram Red 10
Boardman CXR9.8 eTap 11
Open UPPER - DA 9270
Ridley x-fire Sram Red 10
and lots of non- WW others.