Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Fri Dec 09, 2016 10:43 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

All times are UTC+01:00

Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Tue Jan 14, 2014 10:13 am 

Joined: Thu Mar 17, 2011 2:11 am
Posts: 91
So i have a few questions that my searching hasn't brought much clarity to…
Can i run the iron cross wheel with tubes and challenge grifo open tub like a standard clincher wheel? (i have some laying around that need a home)
Come summer/ spring can i throw on a 28c road tire (gatorskin most likely) with tubes and use these wheels as gravel racing wheels? If so what psi would be recommended? I know theres something about 45psi as a max, but is that only for tubeless set ups? Id like to run around 100psi just like a standard road tire.

thanks for any insight


Posted: Tue Jan 14, 2014 10:13 am 

PostPosted: Tue Jan 14, 2014 11:01 am 
User avatar

Joined: Sat Jun 19, 2004 11:08 am
Posts: 6852
Location: Urbana, Illinois
I would say the answer to all is yes. Why not contact Stans and get the manufacturers recommendation. Also why not tubeless? I run Mud 2 tires tubeless on my Alpha 340 comps on my cross bike at about 35 psi and they are great. They don't have to be tubeless tires to run them tubeless.


PostPosted: Wed Jan 15, 2014 12:30 pm 
User avatar

Joined: Mon Dec 09, 2013 3:19 pm
Posts: 308
Location: Denmark
First: yes

Second: yes

psi: I would recommend way less than 100. 70 tops.

PostPosted: Wed Jan 22, 2014 8:49 pm 

Joined: Fri Jun 25, 2010 10:24 pm
Posts: 124
I just bought a Ridley X-Night Disc bike from Comp Cyclist. It was my first ever "box bike" (have always bought framesets and built up from there). Ridley shipped it with Iron Cross/Challenge Grifo clinchers as standard.

PostPosted: Sun Jan 26, 2014 9:44 pm 
User avatar

Joined: Mon Nov 02, 2009 8:38 pm
Posts: 293
I'd be leery of running high pressures on the Iron Cross. I just built a set of these and they are very thin, light rims. Mine were both under 380g.

Also, with the reports of tubes blowing off Alpha 340s, I'm inclined to think this style of rim is inherently unsuited to high pressures. There's some advice from Stan's people here, although it stops short of being definitive:

http://messageboard.notubes.com/viewtop ... f=1&t=6459

Btw, the tubeless setup is dead simple with these, I just did it with Superstar tape and valves, and Stan's sealant. You'd need different tyres though, as skinwalls like the Grifos aren't suitable.

Blog: http://thesetbackpost.com/

PostPosted: Thu Jan 30, 2014 2:05 pm 
in the industry
User avatar

Joined: Fri Sep 09, 2011 2:38 pm
Posts: 94
Location: Brighton, UK
Kevin - do not over-inflate the Iron Cross. There is max 45 psi with ANY tyre for this rim. You will risk rim failure if you exceed that!

Strada Hand Built Wheels

PostPosted: Tue Mar 25, 2014 6:06 am 

Joined: Sun Mar 25, 2012 7:19 pm
Posts: 16
I ran IC with tubes and grifo/fangos and they were great but as others have said, you cannot run pressure for road season. Stan's will tell you the same, as I asked that question prior to my IC purchase.

Posted: Tue Mar 25, 2014 6:06 am 

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Notubes Crest/Iron Cross - real world experience with psi

[ Go to page: 1 2 ]

in Cyclocross / Gravel / Touring




Fri Mar 18, 2016 9:30 pm

jcrr View the latest post

There are no new unread posts for this topic. osbb confusion

in Road




Sun Dec 04, 2016 1:34 pm

bikerjulio View the latest post

There are no new unread posts for this topic. Stans 340 brakewall thickness

in Everything wheels




Mon Nov 28, 2016 7:36 pm

mattr View the latest post

There are no new unread posts for this topic. Anyone running Stans Valor rims in CX?

in Cyclocross / Gravel / Touring




Sun Jan 10, 2016 10:15 pm

the_marsbar View the latest post

There are no new unread posts for this topic. New 'Cross Tubeless

in Everything wheels




Thu Feb 11, 2016 2:55 pm

Geoff View the latest post

All times are UTC+01:00

Who is online

Users browsing this forum: Jowwy and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited