Campagnolo-how to make 1x10 left shifter?

Especially for light weight issues concerning cyclocross / touring bikes & parts.

Moderator: Moderator Team

Post Reply
grzegosz
Posts: 8
Joined: Wed Oct 24, 2012 10:46 am

by grzegosz

Hello,
i didn't find any tips about that in web (there are lots of about Sram), so maybe someone of you did that. How to remove internals from Campagnolo Ergo Shifters, to make 1x10 setup?

User avatar
bikerjulio
Posts: 1901
Joined: Fri Dec 11, 2009 10:38 pm
Location: Welland, Ontario

by bikerjulio

I did this when I accidentally farked up a left shifter.

No problem, you just take it apart, remove all the bits associated with shifting, button, lever, internals, and you are just left with a brake lever.

There's videos on youtube for campy shifter dissassembly if you've never done it before.
There's sometimes a buggy.
How many drivers does a buggy have?

One.

So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

http://www.youtube.com/watch?v=GekiIMh4ZkM

by Weenie


budgetweenie
Posts: 47
Joined: Fri Feb 17, 2012 5:33 pm
Location: Louisiana USA

by budgetweenie

You can also use a 10mm headset spacer slid into the gap left by the thumb lever and wrap with a bit of tape to eliminate the notch in the grip left by the lever and guts removal.

mjduct
Posts: 662
Joined: Tue Dec 27, 2011 2:19 pm

by mjduct

how about you just pull the cable =]

Post Reply
  • Similar Topics
    Replies
    Views
    Last post