Girlfriends Crux Carbon Disc in at 15.7lbs 7.121kg
Stans Race Gold wheel set
Sram Red

wow very nice!

how much does the wheels weight?

Stans Race Gold 1390g
disc-75g each
Challenge Grifo 335g each
set up tubeless.

Sweet bike!

When you brake how close are the levers to the bar?

With the Hayes CX-5 I can adjust the throw to almost right as you touch the lever (pads not rubbing the rotor) or almost to the bar, pending on how you adjust the pads and cable to your feel on how much lever action you want to apply for braking. I’ve had the BB7’s before my opinion these are a lot better all around.

Hmmm, interesting. Thank you.

great, thanks for the details

Sick bike, about 3.5lbs lighter than my Crux.

Here is mine new Crux carbon Disc 52cm.



Red shifters
Red front der.
Force rear der.
Force Chain and casette 11-28
Red cranks 46-36
3T Ltd Palladio seatpost
SLR Ti saddle
3T Ergonova Team bar 42cm
3T Team stem 100mm
Shimano BR-CX75 brakes
Mavic Crossmax ST Disc wheels
King gage
Race Ware Direct 500 mount
Crank Brothers Twin Ti pedals

7.950kg +-10g ready to ride weight (with new pedals and casette about 7.780kg)

What size rotors are Crux disc owners running in the front? I'm building up a 2013 Crux Carbon Pro and I'm finding that I can't get a 160mm rotor into the caliper when I mount the Avid BB7 caliper directly in the post mount. This makes me suspect the fork is sized for a 140mm rotor. Guess I need an adapter from Avid to use the 160mm rotor?

You dont mount the bb7 directly to the fork. You must use the CPS washers. Two under and two over the caliper, per bolt.

_________________
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction."

Amazing looking bike!

Yes, the issue I describe above is with the the CPS washers in place. Do you know the answer to my question?