Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Thu Oct 19, 2017 7:00 am

All times are UTC+01:00





Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Fri Jun 01, 2012 5:33 pm 
Offline
User avatar

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 2162
Location: Houston, Texas
So in terms of spoke counts for cyclocrossuse wheelsets with 160mm rotors for a ~79kg rider, what are the considerations/limitations of 24/24 versus 24/28 versus 28/28.

_________________
Michael - The Anaerobic Threshold is neither...


Top
   
PostPosted: Mon Jun 04, 2012 11:53 am 
Offline
in the industry
User avatar

Joined: Fri Sep 09, 2011 2:38 pm
Posts: 123
Location: Brighton, UK
I would opt for 28 / 28 ideally with a spoke designed for use with Disc braking such as a DT Swiss Revolution or the Sapim CX Ray to keep the weight down. The torque at the hub end of the spoke is higher than cantilever when under braking.

_________________
Strada Hand Built Wheels
http://www.stradawheels.co.uk


Top
   
Posted: Mon Jun 04, 2012 11:53 am 


Top
   
 
PostPosted: Tue Jun 05, 2012 11:15 pm 
Offline

Joined: Tue Dec 27, 2011 2:19 pm
Posts: 662
that explains why I keep busting them at the hub on my 29er!


Top
   
PostPosted: Wed Jun 06, 2012 3:53 pm 
Offline
User avatar

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 2162
Location: Houston, Texas
So are loads at the hub for disc wheels handled differently based on hub design and spoke patterns? I notice both Easton and Reynolds are marketing sub 1500 grram carbon tubeless 29er wheelsets featuring 24/24 spoke counts with hubs that use straight pull spokes.

Image

_________________
Michael - The Anaerobic Threshold is neither...


Top
   
PostPosted: Fri Jun 08, 2012 8:24 pm 
Offline
in the industry
User avatar

Joined: Fri Sep 09, 2011 2:38 pm
Posts: 123
Location: Brighton, UK
Yes Michael - think about the torque being applied to the hub flange when you pedal hard and then apply the disc brake. The flange and spoke needs to cope with these forces. There is more twist being applied to the area close to the hub flange on a disc brake than out at the rim on a cantilever brake.

In fact, Sapim have released the D-Light specifically for disc applications such as CX or 29er.

_________________
Strada Hand Built Wheels
http://www.stradawheels.co.uk


Top
   
PostPosted: Fri Jun 08, 2012 8:54 pm 
Offline
User avatar

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 2162
Location: Houston, Texas
StradaJon wrote:
In fact, Sapim have released the D-Light specifically for disc applications such as CX or 29er.
Ah, good to know. So if sourcing hubs with straight pull spokes, then sounds like 24/24 or 24/28 would be a safe bet, otherwsie for conventionalal hubs sounds like I need to consider 3-corss with a minumum of 28/28 and Sapim D-Light spokes. At this point, if I were building a single wheelset, I use Enve or Zipp rims but got to replace 3-4 sets of Easton EC90 SL carbon tubulars so cost is a fact but I have read numerous possitive comments at another cycling related forum about 50mm carbon tubulars with 23mm width from Farsports and Yishun in China.

_________________
Michael - The Anaerobic Threshold is neither...


Top
   
PostPosted: Fri Jun 15, 2012 8:46 am 
Offline
in the industry

Joined: Thu May 17, 2012 7:38 am
Posts: 58
StradaJon wrote:
Yes Michael - think about the torque being applied to the hub flange when you pedal hard and then apply the disc brake. The flange and spoke needs to cope with these forces. There is more twist being applied to the area close to the hub flange on a disc brake than out at the rim on a cantilever brake.

In fact, Sapim have released the D-Light specifically for disc applications such as CX or 29er.


+1

_________________
like us on facebook
yishun bike: cost-effective carbon wheels/frame/bike parts


Top
   
Posted: Fri Jun 15, 2012 8:46 am 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Disc brake wheelset decision: Enve SES 3.4 4.5AR 5.6

in Everything wheels

jlok

11

1777

Thu Mar 30, 2017 7:38 am

jlok View the latest post

There are no new unread posts for this topic. The Festka Scalatore "Don't count the days, make the days count"

[ Go to page: 1 2 3 4 5 ]

in Introduce Yourself / Gallery - Please use metric weights.

Bely

66

11059

Sun Sep 10, 2017 8:20 am

beanbiken View the latest post

There are no new unread posts for this topic. New handbuilt wheelset - spoke irregularity issue

in Everything wheels

Pezeke

7

536

Fri Oct 06, 2017 10:13 am

whosatthewheel View the latest post

There are no new unread posts for this topic. Roval CLX 64 Disc Clincher Wheelset - Brand New

in For sale - Pictures are mandatory 22-3-13

Samklee15

0

8

Thu Oct 19, 2017 6:00 am

Samklee15 View the latest post

There are no new unread posts for this topic. Would anyone consider a 28h or 32h rim brake wheelset?

[ Go to page: 1 2 ]

in Everything wheels

istigatrice

18

1396

Tue Mar 21, 2017 9:27 am

mattr View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited