Page 61 of 75

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Sat Mar 02, 2013 4:41 am
by Horacio
[imgImage
photo by Harleyhoracio, on Flickr][/img]

Internal battery.

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Sat Mar 02, 2013 4:41 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Sat Mar 02, 2013 1:41 pm
by HillRPete
C24 tubs will be back in 2014, at 1100g. Should be good ...

http://www.bikerumor.com/2013/03/01/shi ... s-hanging/

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Sat Mar 02, 2013 2:05 pm
by petal666
That's some great news, my favourite wheel.

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Sat Mar 02, 2013 2:11 pm
by virenque
so you managed to score a set of 9070 . . .

Image

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Sat Mar 02, 2013 8:01 pm
by SvenNijs
virenque wrote:so you managed to score a set of 9070 . . .

Ooooh, shiny......... :unbelievable:

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Sat Mar 02, 2013 10:08 pm
by NWSAlpine
Nice! A shop that is right down the street has had full 9070 in the display case. Just went in to pick up a Garmin 510 today. They also have tons of Enve/Zipp wheels and awesome frames. I have a hard time leaving. I was drooling over the BMC TMR01.

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Sun Mar 03, 2013 3:35 am
by Horacio
Where is all that fresh 9070 at?!?
I need.
I want.

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Sun Mar 03, 2013 8:24 am
by motd2k
virenque wrote:so you managed to score a set of 9070 . . .


So that's what $250,000 looks like!

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Mon Mar 04, 2013 5:19 am
by Horacio
I mounted the front juction box. I thought it was going to be tricky since I didnt want the supplied band around the stem and the box interfered with the rear Garmin mount bolt. I managed to come up with a solution, so I hope I dont have any issues.
Beware of the juction box mounting release tab, its weak and mine is already broken.
I'll be changing out the bolts for lower profile ones.
Image
photo 1 by Harleyhoracio, on Flickr

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Tue Mar 05, 2013 4:08 pm
by atxfireman
In a Facebook posting yesterday, Shimano Cycling says they have shipped out their DI2 stock. I said "I'll believe it when I see it." :?

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Tue Mar 05, 2013 6:53 pm
by CerveloMikey
So how does the new wiring system work? Purchase front and rear juction boxes, a length of wire to connect them together and plug the shifters into the front and the derailleurs into the rear?

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Tue Mar 05, 2013 7:05 pm
by Horacio
Yes

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Tue Mar 05, 2013 8:44 pm
by ipenguinking
Can I update the firmware with SM-BCR2 (charger) or do I need SM-PCE1?

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Tue Mar 05, 2013 9:19 pm
by goodboyr
You need the new charger plus one of the new front junctions (either the 3 port or 5 port). The new junctions have the charging port that the charger plugs into and that allows the charger to communicate with the system to update firmware.

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Wed Mar 06, 2013 12:50 am
by Horacio
Are there any retailers in the US that anyone knows of that have shifters, FD and RD?

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Wed Mar 06, 2013 12:50 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com