Page 61 of 75
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Sat Mar 02, 2013 4:41 am
by Horacio
[img
photo by
Harleyhoracio, on Flickr][/img]
Internal battery.
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Sat Mar 02, 2013 4:41 am
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Sat Mar 02, 2013 1:41 pm
by HillRPete
C24 tubs will be back in 2014, at 1100g. Should be good ...
http://www.bikerumor.com/2013/03/01/shi ... s-hanging/
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Sat Mar 02, 2013 2:05 pm
by petal666
That's some great news, my favourite wheel.
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Sat Mar 02, 2013 2:11 pm
by virenque
so you managed to score a set of 9070 . . .
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Sat Mar 02, 2013 8:01 pm
by SvenNijs
virenque wrote:so you managed to score a set of 9070 . . .
Ooooh, shiny.........
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Sat Mar 02, 2013 10:08 pm
by NWSAlpine
Nice! A shop that is right down the street has had full 9070 in the display case. Just went in to pick up a Garmin 510 today. They also have tons of Enve/Zipp wheels and awesome frames. I have a hard time leaving. I was drooling over the BMC TMR01.
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Sun Mar 03, 2013 3:35 am
by Horacio
Where is all that fresh 9070 at?!?
I need.
I want.
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Sun Mar 03, 2013 8:24 am
by motd2k
virenque wrote:so you managed to score a set of 9070 . . .
So that's what $250,000 looks like!
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Mon Mar 04, 2013 5:19 am
by Horacio
I mounted the front juction box. I thought it was going to be tricky since I didnt want the supplied band around the stem and the box interfered with the rear Garmin mount bolt. I managed to come up with a solution, so I hope I dont have any issues.
Beware of the juction box mounting release tab, its weak and mine is already broken.
I'll be changing out the bolts for lower profile ones.
photo 1 by
Harleyhoracio, on Flickr
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Tue Mar 05, 2013 4:08 pm
by atxfireman
In a Facebook posting yesterday, Shimano Cycling says they have shipped out their DI2 stock. I said "I'll believe it when I see it."
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Tue Mar 05, 2013 6:53 pm
by CerveloMikey
So how does the new wiring system work? Purchase front and rear juction boxes, a length of wire to connect them together and plug the shifters into the front and the derailleurs into the rear?
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Tue Mar 05, 2013 7:05 pm
by Horacio
Yes
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Tue Mar 05, 2013 8:44 pm
by ipenguinking
Can I update the firmware with SM-BCR2 (charger) or do I need SM-PCE1?
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Tue Mar 05, 2013 9:19 pm
by goodboyr
You need the new charger plus one of the new front junctions (either the 3 port or 5 port). The new junctions have the charging port that the charger plugs into and that allows the charger to communicate with the system to update firmware.
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Tue Mar 05, 2013 9:19 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Dura Ace 9000 - ETA late 2012/early 2013
Posted: Wed Mar 06, 2013 12:50 am
by Horacio
Are there any retailers in the US that anyone knows of that have shifters, FD and RD?