anyone have any info on a 2010 S3...

will be hitting the GO button on some enve 6.7 and want to make sure they will clear...

I think the 2009 S3 had issues?

but the 2010 is ok???

any ideas....

I have tested the new 404 FC on a 2009 S3 and all is fine. the only difference between the 2009 and 10-11 models was where and how wide the stays were as they got near the dropout. It really only had issues with low profile rims with very wide spokes.

The width of the area that the rim sits is the same on all models.

It is not because of the rim that certain wheels won't fit the S3, but about the stance width of the spoke flange of the hub.

I believe Enve wheels have DT hubs, which have a rather narrow spoke flange width.

it is a combination of the width of spoke, depth of rim and width of the left flange. A wide spoke on a low profile rim will hit the chainstay, think Fulcrum or Mavic, but a normal spoke on a deep rim will most likely not have any issues.

IMG_0135 by aussie_pilot, on Flickr

works!!!

That's gorgeous. Mind if I borrow it next season?

_________________
2011 Cannondale SuperSix HiMod: 6.19 kg. / 13.65 lbs.
2005 Fuji Team Issue: 6.6 kg. / 14.5 lbs.

yeah it rips along the roads here in Adelaide!!!!

Woooooo...that looks awesome!!

_________________

what? that looks great!

now, just get a mount for your G800 similar to the SRM one.

I've considered this, but I can't find a real solid one. Mounted on the FSA I'm scared my Garmin will fly off. It doesn't look too solid.

Do you know of others?

-Eric

_________________
www.ergottwheels.com

Great looking build. I love the black on black graphics.

_________________
http://www.zencyclery.com

http://www.wheelbuilder.org

yeah the garmin 705 will get an upgrade soon!!!!

might go to a 500, or 800 for europe in 2012

At the risk of derailing this thread (sorry) - Eric I agree, the FSA one is no good for the Edge 800 - sags a little and shakes terribly. I found Nirvana with Bevato International bike light mount. Carbon one has a cast aluminium bracket (very solid) and a carbon tube to mount the device to. I cut the tube to length required. Am using it for Egge 800 - perfect. There is a plastic one which is lighter but the rigid aluminium bracket avoids annoying shaking of the Garmin on less-than-perfect roads which makes the screen illegible. Mounts the Edge 800 in the perfect spot in front of the stem. Absolutely no danger of shedding the 800 over a bump.

http://www.geomangear.com/index.php?mai ... rers_id=24" onclick="window.open(this.href);return false;

As for the OP - the 6.7s should only represent an issue with a hub having extremely wide left spacing (such as on a triplet specific hub).

_________________
"Bite off more than you can chew, then chew like hell." Peter Brock.

Further off-topic, this mount is sold under a lot of different brand names, and it does work *very* well. Unfortunately, it's not terribly light at ~57g. Here are a couple shots of it mounted (carbon tube trimmed) and with the 800 mounted in place:

r_mutt steered me toward one of those and I ordered one.

Sorry for the drift. It's a real nice bike and setup.

-Eric

_________________
www.ergottwheels.com