Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sat Apr 30, 2016 2:17 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed
- Tapatalk connection is currently broken

Those bugs will be fixed ASAP (next few days) as they are unfortunately more serious than expected.

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

All times are UTC+01:00

Post new topic  Reply to topic  [ 13 posts ] 
Author Message
PostPosted: Mon Sep 26, 2011 12:56 am 

Joined: Mon Oct 26, 2009 10:19 pm
Posts: 94
Location: Norcal
For a Parlee Z4. Same graphics as:

Probably with a 3t Arx team stem(red stripe) and either ergonova bars or a FSA wing pro compact bar.
31.6mm UD gloss carbon with mild setback(5-20mm)
not too $$$ and not too much heavier than a Thomson elite.
The reference point in terms of weight/adjustability and overall reliability is Thomson, I just want to try something different.

The first thing that came to mind is the Doric team, but I've read bad reviews about the clamp.
Same with the Bontrager XXX lite (clamp mechanism not solid and rails too short).

The 2 current ones I'm contemplating are the Syntace P6 and the Fizik Cyrano. Both supposedly have great clamps and overall reliability and not too $$$. Weightwise they are not spectacular but reliability>>weight.

PostPosted: Mon Sep 26, 2011 1:10 am 

Joined: Sat Aug 29, 2009 4:30 pm
Posts: 1861
I just switched from a Dorico Team White (Red stripe) to a Thompson Masterpiece Setback (both 31.6).
Both the Thompson and the Dorico are cut to about 233 mm to the rails.
The Thompson was 153 gms with its stock steel bolts
The Dorico was 210 gms with its stock titanium bolts

If you are interested in my Dorico, and the length will work for you, PM me,

PostPosted: Mon Sep 26, 2011 1:46 am 
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
you mentioned considering the Doric, but werent thrilled about the clamp. the doric's clamp is fine, but it has no setback and the uppper yokes take a lot of room, leaving fore-aft adjustment lacking. the doricO has a good bit of setback, but although the clamp mechanism is similar to the doric, it's much worse, with the front bolt being too close to the cradle compared to the rear bolt, leading to uneven bolt tension and just being a bit of a pain to adjust...
the syntace p6 full carbon is awesome, but somewhat heavy. fizik's is alright, but i would expect them to be able to make a carbon post with a one-piece head these days.

PostPosted: Mon Sep 26, 2011 2:09 am 

Joined: Tue Sep 20, 2011 8:15 pm
Posts: 177
The new Fizik seatpost is really quite nice. I have one on my Parlee Z4 as well.


PostPosted: Mon Sep 26, 2011 6:15 am 

Joined: Fri Dec 24, 2010 9:37 pm
Posts: 784
Location: it's raining, it must be uk
the fizik cyrano is a good looking post, excellent clamp, the cf one is bit comfier than the al one

neither is especially light though..

cyrano carbon 31.6mm 330mm 218g
cyrano alloy 31.6mm 330mm 238g

PostPosted: Thu Dec 13, 2012 1:47 am 

Joined: Thu Mar 01, 2012 2:10 am
Posts: 303
My seatpost bolt snapped yesterday so I'm looking for a cheap-ish alloy post.

Currently considering the 3T Pallido Pro or the Thomson Elite setback. The 3T mainly for aesthetics as I'll be swapping to 3T bars in the near future.

Any comments?

PostPosted: Thu Dec 13, 2012 2:32 am 

Joined: Sun Dec 10, 2006 10:21 pm
Posts: 464
Location: NJ, USA
I recently picked up a Williams Cycling Ionic CCS 27.2 post, and at 350mm it weighed 185g (claimed 184g). The 31.6 is supposed to weigh 189g at 350mm. Carbon rail compatible and it cost me $100 shipped. I cut it down to 280mm and it weighed in at 168g. A great deal in my opinion for little money.

PostPosted: Thu Dec 13, 2012 5:13 am 

Joined: Sun Dec 02, 2012 11:06 pm
Posts: 27
+1 for the cyrano - the control tech that came with my supersix broke (and left me on my arse one ride). Replaced it with the cyrano and it is the best post I've used by a long way in terms of clamp design, reliability and it looks good too. Not the lightest, but after a seat post failure I'm targeting other areas for weight now!

PostPosted: Thu Dec 13, 2012 11:03 pm 

Joined: Thu Mar 01, 2012 2:10 am
Posts: 303
Had a look at my post (well, what is left of it) and it looks like it has a lot of setback, about 30mm. So that will narrow my choices somewhat.

PostPosted: Fri Dec 14, 2012 4:16 am 

Joined: Wed Mar 09, 2011 12:28 am
Posts: 13
The Doric clamp isn't that bad to deal with. There are some tight tolerances but workable. If you don't need the set back its a nice post. I rode a Doric LTD for 2 years. Great post but it didn't fit my new frame. Biggest problem is getting an allen wrench for tighten the clamp. Multitools don't work well. Straight allens work much better.

PostPosted: Fri Dec 14, 2012 4:21 am 

Joined: Wed Mar 09, 2011 12:28 am
Posts: 13
A FSA K-Force is red white and carbon. It would look good on that bike.

PostPosted: Fri Dec 14, 2012 3:48 pm 

Joined: Wed Sep 26, 2007 1:57 pm
Posts: 7871
Location: San Francisco, CA
I was a bit Thomson fan until I looked at the VeloNews vibration tests, where it didn't do so well. I'm still a fan but I don't think it's for everyone. I have a Thomson which I've retrofitted with KCNC clamps which is very light, and a KCNC which (of course) has KCNC clamps. The KCNC clamps don't fit perfectly on the Thomson: they work but not as well as they do on a Thomson post.

I can't imagine you care more about looks than about 50 grams.

Fuji SL/1

PostPosted: Fri Dec 14, 2012 3:56 pm 

Joined: Wed Oct 31, 2007 10:32 pm
Posts: 8140
Location: Los Angeles / Glendale, California
Setback? Yes or no?

No? Omni, Token, SMUD.

Exp001 || Other projects in the works.

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

All times are UTC+01:00

Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot], Google [Bot], liam7020, TwincamRob, Yahoo [Bot] and 35 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited