Deda Superzero Seatpost bolts
Posted: Fri Dec 10, 2010 11:44 pm
Does anybody know if titanium hardware exist for the Deda Superzero seatpost? Please help me to make the Superzero lighter 
. Thanks.
. Thanks.Weight Weenies
Forum
https://weightweenies.starbike.com/forum/
Deda Superzero Seatpost bolts
https://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=80211
Page 1 of 2
Re: Deda Superzero Seatpost bolts
Posted: Sat Dec 11, 2010 4:37 am
You can get 40 or 45mm Ti bolts from Total Cycling or Toronto Cycles. I had on my Superzero before I replaced it with a 3T zero setback post.
Re: Deda Superzero Seatpost bolts
Posted: Sat Dec 11, 2010 4:37 am
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Deda Superzero Seatpost bolts
Posted: Sat Dec 11, 2010 6:05 pm
do you have the 33cm and 27,2 mm version? if you do, could you tell me the weight? i'm planning to buy the superzero because it's quite cheap and i thaught it was quite light?
thank you very much!
thank you very much!
Re: Deda Superzero Seatpost bolts
Posted: Sat Dec 11, 2010 9:23 pm
31.6 post weighs 215g uncut. I have cut mine to 290mm, tuned the alloy parts with a belt sander (60g down to 46g), and replaced the 2 steel 40mm bolts with 35mm Ti ones (20g down to 9g). Post now weighs 173g
Re: Deda Superzero Seatpost bolts
Posted: Sun Dec 12, 2010 2:16 am
hanoskator, 190g for the 27.2 is what I have. Not exactly light as advertised.
Re: Deda Superzero Seatpost bolts
Posted: Sun Dec 12, 2010 8:52 pm
I think, superzero has great possibility to cut some grams.
Re: Deda Superzero Seatpost bolts
Posted: Mon Dec 13, 2010 1:48 am
karelh, sorry to be so dumb. I spend about 45 minutes examined the photos. How exactly do these parts fit to the bare post? Thanks.
Re: Deda Superzero Seatpost bolts
Posted: Mon Dec 13, 2010 9:20 am
There is no problem with compatibility. KCNC M6 yokes, standard titanium M6x35mm bolts. The only little bit more complicated thing is half pipe. The one on the picture is made from steerer tube (31,8mm). Nowadays I let a new one done - professionaly, which will fit perfectly. If you want one post me an email.
Re: Deda Superzero Seatpost bolts
Posted: Mon Dec 13, 2010 2:36 pm
Awesome, karelh. Thanks for this great tip and photo. Really appreciate it. Will let you know about it.
Re: Deda Superzero Seatpost bolts
Posted: Wed Jan 19, 2011 12:17 pm
I have one extra carbon cradle to tune Superzero. If anybody would be interested, contact me. Diameter is 25mm for potential compatibility with other seatpost.
Re: Deda Superzero Seatpost bolts
Posted: Thu May 03, 2012 8:08 pm
Do you still have the carbon cradle?
Re: Deda Superzero Seatpost bolts
Posted: Thu May 03, 2012 8:25 pm
rekrej wrote:Do you still have the carbon cradle?
Succesfully sold
Re: Deda Superzero Seatpost bolts
Posted: Fri May 04, 2012 6:13 pm
It's the yokes that make the post so heavy...had one, and weighed the pieces..the shaft is not bad...the actual weight is way above advertised
Re: Deda Superzero Seatpost bolts
Posted: Sun Feb 24, 2013 2:54 pm
Are there any aftermarket cradles available for this post? I'd like to tune mine. KCNC yokes + titanium screws seems a good option, but still looking for a cradle.
Re: Deda Superzero Seatpost bolts
Posted: Sun Feb 24, 2013 6:27 pm
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com