Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Tue Sep 27, 2016 2:50 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 47 posts ]  Go to page 1 2 3 4 Next
Author Message
 Post subject: Dati 194/64gr hub
PostPosted: Wed Nov 10, 2010 9:53 pm 
Offline

Joined: Wed Feb 27, 2008 3:41 pm
Posts: 1039
Just got a set from ebay and scaled them. Weighs 64.6gr and 194.5gr as advertised. My friend has a black set and his ones are even lighter, weighing 62/192gr.
Build quality is just okay, although not comparable to more expensive machined hubs.

I got them at $150 w/shipping, and my friend paid the same, but unfortunately the sellers raised the price significantly. :[


Attachments:
P1030234.JPG
P1030234.JPG [ 54.08 KiB | Viewed 8025 times ]
P1030236.JPG
P1030236.JPG [ 19.29 KiB | Viewed 8025 times ]
Top
   
 Post subject: Re: Dati 194/64gr hub
PostPosted: Wed Nov 10, 2010 9:58 pm 
Offline
User avatar

Joined: Sat Jan 03, 2009 9:43 pm
Posts: 3036
Location: Canada
sweet, pretty light, what are you going to build them to?


Top
   
 Post subject: Re: Dati 194/64gr hub
Posted: Wed Nov 10, 2010 9:58 pm 


Top
   
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Wed Nov 10, 2010 10:02 pm 
Offline

Joined: Tue Jul 18, 2006 5:18 am
Posts: 706
Location: Cambridge, New Zealand
do you have dimensions for them?

_________________
http://www.speedtheory.co.nz
http://www.velogicfit.com - 3D Motion Capture and Frame Finder Software


Top
   
 Post subject: Re: Dati 194/64gr hub
PostPosted: Wed Nov 10, 2010 10:08 pm 
Offline

Joined: Wed Feb 27, 2008 3:41 pm
Posts: 1039
devinci wrote:
sweet, pretty light, what are you going to build them to?


Will use them with chinese 38mm clincher rims I have bought with group buy.
Rims were heavier than I have expected (~450gr), so they will make a ~1370gr clincher wheelset.


Top
   
 Post subject: Re: Dati 194/64gr hub
PostPosted: Wed Nov 10, 2010 10:40 pm 
Offline
User avatar

Joined: Sun Sep 21, 2008 9:07 pm
Posts: 1044
Location: Slovenia---that forest land
That will be nice low cost wheelset :thumbup:

_________________
http://kavitec.blogspot.com/

click this! http://www.youtube.com/watch?v=0m8maAO-m-w


Top
   
 Post subject: Re: Dati 194/64gr hub
PostPosted: Mon Nov 22, 2010 3:10 pm 
Offline

Joined: Thu Sep 02, 2010 8:38 am
Posts: 16
Anyone buildt up a wheelset with these hubs yet?????
If so would you recommend them?


Top
   
 Post subject: Re: Dati 194/64gr hub
PostPosted: Mon Nov 22, 2010 6:10 pm 
Offline

Joined: Sat Mar 07, 2009 10:04 pm
Posts: 143
Raxel wrote:
Will use them with chinese 38mm clincher rims I have bought with group buy.
Rims were heavier than I have expected (~450gr), so they will make a ~1370gr clincher wheelset.


Thats a great weight for 38mm clincher.... nice balance of aero & weight.

_________________
Tarmac SL3 S-Works 13.75lbs 6.24kg
Jamis Xenith Pro 16.1lbs 7.31kg


Top
   
 Post subject: Re: Dati 194/64gr hub
PostPosted: Thu May 05, 2011 12:01 pm 
Offline

Joined: Wed Apr 01, 2009 12:43 pm
Posts: 41
Location: Ireland
I got a set of these hubs in green yesterday. Here's the measurement I took last night, if you got anything different please let me know.

Using the diagram here http://www.sheldonbrown.com/rinard/spocalc.htm below are the measurements.

Front Hub:
S = 2.6mm
d = 30mm
A = 17mm
WL = 33mm
WR = 33mm
B = 17mm

Rear Hub
S = 2.6mm
dL = 37mm
dR = 50mm
A = 32mm
WL = 32.5mm (Edited - Not 42.5)
WR = 17.5mm (Edited - Not 7.5)
B = 48mm

Regards....!


Last edited by Garret C on Thu Jul 07, 2011 3:44 pm, edited 2 times in total.

Top
   
 Post subject: Re: Dati 194/64gr hub
PostPosted: Thu May 05, 2011 12:07 pm 
Offline
User avatar

Joined: Sun Jun 12, 2005 10:56 am
Posts: 2673
Location: New Zealand
I bought a set in black body with red axel ends about 8 months ago for $139US plus postage (to NZ). Sadly, the rims I was to use for the project (60mm carbon clinchers at 960g/pr) have been a bit of a drama so I have not got them built up to RIDEABLE state yet. The bearings are very smooth, I must say. My set have a slight off centre on the spoke holes within the flange (not good) and are about 260g/pr.

_________________
Updated: Racing again! Thought this was unlikely! Eventually, I may even have a decent race!
Edit: 2015: darn near won the best South Island series (got second in age
-group)..woo hoo Racy Theremery is back!!


Top
   
 Post subject: Re: Dati 194/64gr hub
PostPosted: Fri Jun 24, 2011 3:19 pm 
Offline

Joined: Fri Feb 11, 2011 4:10 pm
Posts: 29
Has anybody used these hubs and can they report on quality etc. Thanks

_________________
Colnago C59 Italia
Fondriest TF2 1.0
De Rosa Protos


Top
   
 Post subject: Re: Dati 194/64gr hub
PostPosted: Fri Jun 24, 2011 4:58 pm 
Offline
User avatar

Joined: Sat Apr 09, 2011 11:29 pm
Posts: 767
Location: Springdale, AR
WL = 42.5mm
WR = 7.5mm

I'd be very timid using that rear.

Rotaz weighs more, but I think it has better flange spacing.

_________________
Specialized Allez 06' "Rain Bike" 21.50lbs
Neuvation F100 11' "Road Bike" 16.80lbs
Specialized Tarmac Pro 11' "WW Bike" 14.25lbs


Top
   
 Post subject: Re: Dati 194/64gr hub
PostPosted: Fri Jun 24, 2011 5:24 pm 
Offline

Joined: Wed Sep 05, 2007 2:02 pm
Posts: 396
That measurement can't be right, should probably be 32.5 and 17.5.
Just by looking at it you can tell this hub has no worse geometry than the Rotaz.


Top
   
 Post subject: Re: Dati 194/64gr hub
PostPosted: Fri Jun 24, 2011 5:32 pm 
Offline

Joined: Sat Mar 19, 2011 10:50 pm
Posts: 659
Here are the correct measurements.

Image
Image


Top
   
 Post subject: Re: Dati 194/64gr hub
PostPosted: Fri Jun 24, 2011 5:38 pm 
Offline

Joined: Wed Sep 05, 2007 2:02 pm
Posts: 396
Oooh, actually that's a very generous 19mm DS.

Way better geometry than Rotaz then.


Top
   
 Post subject: Re: Dati 194/64gr hub
PostPosted: Fri Jun 24, 2011 11:03 pm 
Offline
User avatar

Joined: Sat Apr 09, 2011 11:29 pm
Posts: 767
Location: Springdale, AR
I'd agree that is pretty awesome flange spacing all things conisdered. Though, the Rotaz is suppose to be identical to American Classic hub flange spacing which is 30mm/20mm. I like it a tad more.

If Dati had a beefy axle and came in 36h...I could be swayed.

_________________
Specialized Allez 06' "Rain Bike" 21.50lbs
Neuvation F100 11' "Road Bike" 16.80lbs
Specialized Tarmac Pro 11' "WW Bike" 14.25lbs


Top
   
 Post subject: Re: Dati 194/64gr hub
Posted: Fri Jun 24, 2011 11:03 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 47 posts ]  Go to page 1 2 3 4 Next

All times are UTC+01:00


Who is online

Users browsing this forum: andylav, cyclespeed, NYCPrynne, rbrtwyn, Slimtim, TomColnago and 47 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited