Juan
I use a twister bb but that's on normal pulsion, not the CT-2 cranks...
Hope that helps
Cheers
Stronglight crank users question.
Moderator: robbosmans
-
- Posts: 1288
- Joined: Thu Nov 04, 2004 4:05 pm
can't tell you off hand, will have to go home and double check...sorry
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
The stronglight bolt is 15mm. American classic 144gram bb uses a 15mm.
Or you can just get some 14mm bolts if you want to keep your current bb. Using the stock al FSA bolts will save you a few grams too.
Or you can just get some 14mm bolts if you want to keep your current bb. Using the stock al FSA bolts will save you a few grams too.
The internal threading is standard. Any ISIS puller will work on it.
Also remember you will have to modify a shimano tool to get the crank bolts out. The holes are just a little too far apart
Also remember you will have to modify a shimano tool to get the crank bolts out. The holes are just a little too far apart
The FSA BB with the standard 14mm bolts works fine with the Stronglight.
That's what I use.
Just struggle to remove the Stronglight bolts, and put the FSA in place.
I used a needle nose narrow tip plier in the holes to get the Stronglight bolts out of the crank.
What a pain!!!
Standard extractor works fine.
That's what I use.
Just struggle to remove the Stronglight bolts, and put the FSA in place.
I used a needle nose narrow tip plier in the holes to get the Stronglight bolts out of the crank.
What a pain!!!
Standard extractor works fine.