Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sat Dec 16, 2017 2:55 am

All times are UTC+01:00





Post new topic  Reply to topic  [ 1578 posts ]  Go to page Previous 159 60 61 62 63106 Next
Author Message
 Post subject: Re: Bont shoes
PostPosted: Mon Apr 29, 2013 3:37 am 
Offline

Joined: Tue Dec 11, 2012 9:47 am
Posts: 125
I don't see what you being an 11 in other shoes has to do with your Bont size? Their website is pretty clear that if your foot is 268mm long you should be looking at a size 8.5. Your size in other brands is irrelevant. No reason to believe that sizes should match across brands.

FWIW you may want to go up half a size to have some extra room for the sock. That seems to work well for people in general.


Top
   
 Post subject: Re: Bont shoes
PostPosted: Mon Apr 29, 2013 6:16 am 
Offline
User avatar

Joined: Mon Apr 22, 2013 5:55 am
Posts: 494
Location: Vladivostok
+1

I followed the instructions on Bont's website, according to their chart, and using my measurements, I was an EU 45, no dramas - fit great, even pre-molding.
FWIW, I'm also a 45 in S-Works and Northwave, but I would use Bont's specific chart before just assuming anything.

_________________
KWalker wrote:
chill out perv dogs, homegirl is still only 17.


Top
   
 Post subject: Re: Bont shoes
Posted: Mon Apr 29, 2013 6:16 am 


Top
   
 
 Post subject: Re: Bont shoes
PostPosted: Tue Apr 30, 2013 3:40 am 
Offline

Joined: Thu Apr 11, 2013 2:50 am
Posts: 143
So my shoe fits way better now. I baked it @ 190F for 20 mins and made shims out of cardboard and taped it on my foot where I get hotspots and wore 1 thin sock and 1 thick sock. I think I could've gone without the 1 thin sock but I put the shoes on after a minute of taking it out the oven so I needed the extra layer to protect my skin

now I have a stack height problem with my Speedplays :x

and unfortunately it cannot be solved by lowering my saddle as I'm already at the max. I need to find a way of increasing the stack height by 5mm (or whatever the usual difference is for Sidi vs Bont). Speedplay sells wedges and shim for leg discrepancy, but they'll just make my shoe too costly instead.

I'm thinking of using plastic sheets, trace and then stack them. I don't know if they'll work but they won't add much weight.

:noidea: grr.


Top
   
 Post subject: Re: Bont shoes
PostPosted: Tue Apr 30, 2013 3:58 am 
Offline

Joined: Thu Jun 28, 2012 10:52 pm
Posts: 333
Location: eNZed
What a problem to have! I can think of 2 ways but neither may be of help to you: shorter cranks and/or thicker insoles.

_________________
Less is more.


Top
   
 Post subject: Re: Bont shoes
PostPosted: Tue Apr 30, 2013 4:17 am 
Offline

Joined: Thu Apr 11, 2013 2:50 am
Posts: 143
I was about to edit my post and ask what influences stack height and if the insoles are also a "part" of it.

I was using my orthotics with my Sidis and I'm estimating it's about 2mm in thickness. I can probably wear insoles since I have much more space now post-bake but let's see.

As for a shorter crank - yes I thought about it and it's actually a possibility since I'm buying a whole new groupset next year, but I'm not sure on how hideous a Shimano crank would look with SRAM groupset, lol. Ugly? I don't know, but I don't really want to resort to that.


Top
   
 Post subject: Re: Bont shoes
PostPosted: Tue Apr 30, 2013 4:42 am 
Offline

Joined: Fri Nov 09, 2012 4:57 am
Posts: 58
Frame = too big ?!


Top
   
 Post subject: Re: Bont shoes
PostPosted: Tue Apr 30, 2013 5:11 am 
Offline

Joined: Thu Jun 28, 2012 10:52 pm
Posts: 333
Location: eNZed
Whatever in between where you're seated to the axis of the pedals counts. Transferring what you were wearing (othortics) to your new Bonts won't increase your stack though. Sram makes all the in-between crank lengths, otherwise don't look down on the ShimaNO cranks but heads-up :up: straight ahead!!

I'm in the not-hung-up-about-mixing-brands camp. At the moment I have all Campag mixed with ShimaNO cranks/O,s rings and Planet X brakes. Time heals every wound, it doesn't look bad anymore :lol:

I went from 170 to 165 and didn't feel that I had made quantum leaps in my pedaling but reaped the bonus of increasing seat to handlebars drop - hey 2+ more aero :thumbup: .

_________________
Less is more.


Top
   
 Post subject: Re: Bont shoes
PostPosted: Tue Apr 30, 2013 7:01 am 
Offline

Joined: Thu Apr 11, 2013 2:50 am
Posts: 143
shimmeD wrote:
Whatever in between where you're seated to the axis of the pedals counts. Transferring what you were wearing (othortics) to your new Bonts won't increase your stack though. Sram makes all the in-between crank lengths, otherwise don't look down on the ShimaNO cranks but heads-up :up: straight ahead!!

I'm in the not-hung-up-about-mixing-brands camp. At the moment I have all Campag mixed with ShimaNO cranks/O,s rings and Planet X brakes. Time heals every wound, it doesn't look bad anymore :lol:

I went from 170 to 165 and didn't feel that I had made quantum leaps in my pedaling but reaped the bonus of increasing seat to handlebars drop - hey 2+ more aero :thumbup: .

I'm using a 167 crank now and don't mind going 165 which Shimano does carry. I could really go down this option now since I'll be using that for next year but I really want to save as much money at the moment.

I think I'll be buying wedges and stack about 5-7mm of it. That's still less than a cm and an eye sore I won't be seeing. I'll try to cut out the shape of the adapter while I wait for those wedges to come in. UGHHHHHHH.
Quote:
Frame = too big ?!

I wouldn't say my frame's too big. I have a 7-10cm saddle to bar drop while have 2 spacers (I honestly could take out one more since I'm more flexible now), don't have to seats pushed too forward and run a 90cm stem.

just frustrated now.


Top
   
 Post subject: Re: Bont shoes
PostPosted: Tue Apr 30, 2013 3:31 pm 
Offline

Joined: Tue Dec 11, 2012 9:47 am
Posts: 125
You could always trim the bottom of your seatpost by 4-5mm... If it's metal this shouldn't be a problem at all, if it's carbon you most likely can get away with it just fine if you saw through it very gently ala fork steerer tube. I dont think this would really compromise any structural integrity but just in case... probably best to not do it if you're a very heavy person.

It pains me to see you want to increase your stack height though. Half the Bont experience is being right on top of the pedal!


Top
   
 Post subject: Re: Bont shoes
PostPosted: Tue Apr 30, 2013 5:01 pm 
Offline

Joined: Thu Apr 11, 2013 2:50 am
Posts: 143
113245 wrote:
You could always trim the bottom of your seatpost by 4-5mm... If it's metal this shouldn't be a problem at all, if it's carbon you most likely can get away with it just fine if you saw through it very gently ala fork steerer tube. I dont think this would really compromise any structural integrity but just in case... probably best to not do it if you're a very heavy person.

It pains me to see you want to increase your stack height though. Half the Bont experience is being right on top of the pedal!

I thought about that too. I'm @ 150lbs atm and don't blow up past 160lbs during winter.

Yes and I agree about the "Bont" experience. When I get my -5mm cranks next year I should be able to attain that.

I'll post pics later on what I can come up with. I'm estimating I really need about 5-7mm of stack.


Top
   
 Post subject: Re: Bont shoes
PostPosted: Tue Apr 30, 2013 5:45 pm 
Offline

Joined: Thu Jun 14, 2012 3:01 pm
Posts: 87
113245 wrote:
You could always trim the bottom of your seatpost by 4-5mm... If it's metal this shouldn't be a problem at all, if it's carbon you most likely can get away with it just fine if you saw through it very gently ala fork steerer tube. I dont think this would really compromise any structural integrity but just in case... probably best to not do it if you're a very heavy person.

It pains me to see you want to increase your stack height though. Half the Bont experience is being right on top of the pedal!
This.

Adding stack height is the wrong way to go.

Shortening cranks is also the wrong way to go.

...but its not my bike...

M


Top
   
 Post subject: Re: Bont shoes
PostPosted: Tue Apr 30, 2013 7:10 pm 
Offline

Joined: Tue Dec 11, 2012 9:47 am
Posts: 125
I have to agree with gummee. Changing crank length is not the way to go.

What kind of seat post do you have? 150lbs is nothing to a post designed to function with a 200lb+ load. I say chop that bitch up.


Top
   
 Post subject: Re: Bont shoes
PostPosted: Sun May 05, 2013 8:23 pm 
Offline

Joined: Thu Apr 11, 2013 2:50 am
Posts: 143
Quote:
I say chop that bitch up.


Gave in. Chopped 2 cm for good measure.

I still left that 2mm of shim but I noticed the huge improvement from my shoes before (+ orthotics). I may need to re-bake them again but otherwise I'm a happy camper :beerchug:


Top
   
 Post subject: Re: Bont shoes
PostPosted: Mon May 06, 2013 1:35 pm 
Offline

Joined: Tue Nov 03, 2009 7:56 pm
Posts: 227
Location: London
I am having difficulty flattening the arch. Any ideas, I am about to get the hairdryer out :D


Top
   
 Post subject: Re: Bont shoes
PostPosted: Mon May 06, 2013 2:46 pm 
Offline

Joined: Sun Apr 15, 2007 4:56 pm
Posts: 177
Location: Beantown
FWIW
My experience:
Bought a pair on sale from Excel, the "Thor" model on close-out.
Fit was spot on, I wear 45 Sidis and went for same with Bont.
They do mold fairly well and easily (my feet have no odd shapes so was straight forward).
They are very light and quite stiff.
Wonderful heel cup that wraps nicely around this narrow heel of mine.
Had some major issues with numbness, hot spots etc. Resolved this entirely when I replaced the thin flimsy inserts of bonts with my "blue" Specialized orthos - feet are happy as clams.

Now if I could only get that right iCliic pedal to stop squeaking when I put the power down...

_________________
It only hurts if you think.


Top
   
 Post subject: Re: Bont shoes
Posted: Mon May 06, 2013 2:46 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1578 posts ]  Go to page Previous 159 60 61 62 63106 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Bont Vaypor+ and Look Keo issues

in Road

girona

2

542

Mon Jun 19, 2017 7:24 pm

TwiggyTN View the latest post

There are no new unread posts for this topic. Attachment(s) Looking for Lake CX237, CX332, Bont Vaypor +, S-Works S6 owners

[ Go to page: 1 2 ]

in Road

Rone69

21

1735

Tue Oct 03, 2017 8:14 pm

Rudi View the latest post

There are no new unread posts for this topic. Shoes, shoes, not all of them created equal

in Road

vejnemojnen

13

1837

Wed Apr 19, 2017 11:57 am

Junior7 View the latest post

There are no new unread posts for this topic. D2 vs Rocket7 shoes

in Road

Master-Ti

14

1448

Sun Feb 12, 2017 4:46 am

Master-Ti View the latest post

There are no new unread posts for this topic. Attachment(s) Boa dials on shoes.

[ Go to page: 1 2 ]

in Road

jmaccyd

20

1946

Sat Dec 24, 2016 5:49 pm

1415chris View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], Google Adsense [Bot] and 40 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited