Page 1 of 2

wipperman ti chain

Posted: Fri Nov 05, 2004 4:56 am
by Mahoney
what does it really weigh, 235 or 259, I know what is listed on this sight but its hard for me to believe a ti chain weighs about as much as a steel chain, any other weigh quotes other than the single sample reported on this page? theories? Because for my money the campy ultra drive ul @ 259 grams is a lot cheaper?

Brent

wipperman ti chain

Posted: Fri Nov 05, 2004 4:56 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Titanium chanis

Posted: Fri Nov 05, 2004 5:31 am
by gandini
I understand that Ti chains are not all titanium--that actually the rollers and pins are ti, and the plates are steel. This explains (at least to me) why they do not weigh all much less than hollow-pin and drilled-plate steel chains like my Campy Ultra 10 (which weighs about 260gms on my bike.)
I stand to be corrected, or course.
cheers,

Posted: Fri Nov 05, 2004 7:11 am
by Mahoney
Second question? Do you think I could use a campy 10 speed chain on my shimano 9 speed set up or would there be significant problems?

Posted: Fri Nov 05, 2004 10:54 am
by Villadsen
Do you think I could use a campy 10 speed chain on my shimano 9 speed set up

Yes you can.

what does it really weigh, 235 or 259

Mine is about 250g. Not quite sure how many links I have in it but I ride 53*25 so it is pretty long (I guess 112 or 114 links)

It is a very nice chain, and the craftmanship that goes into it is probably better than any other chain on the market, however I dont think it is worth its price. My next chain is gonna be Campagnolo Record Ultra.

Posted: Fri Nov 05, 2004 1:10 pm
by MackDaddy
I'm happy with my SRAM PC-99R hollow pin @ 256.5g (shortened by a few links from stock 114 pin OE length.) I ride 50*26 for the record.

I really wanted a PC-89R hollow pin, but got a great deal on the 99R hollow pin, and it works flawlessly. Best of all it only cost me ~ $28.00 shipped from Nashbar (using a 10% web coupon code.)

I'd like to try a PC-89R hollow pin in the future, as the stock weight is less than the PC-99R hollow pin to begin with. But again, the 99R HP is a fantastic chain... light, strong, cheap.

Jim

Posted: Fri Nov 05, 2004 1:32 pm
by teutscher
MackDaddy wrote:I'm happy with my SRAM PC-99R hollow pin @ 256.5g (shortened by a few links from stock 114 pin OE length.) I ride 50*26 for the record.

I really wanted a PC-89R hollow pin, but got a great deal on the 99R hollow pin, and it works flawlessly. Best of all it only cost me ~ $28.00 shipped from Nashbar (using a 10% web coupon code.)

I'd like to try a PC-89R hollow pin in the future, as the stock weight is less than the PC-99R hollow pin to begin with. But again, the 99R HP is a fantastic chain... light, strong, cheap.

Jim


did you really mean 99R - is there really a roadversion of the pc99 (the R-versions have those funny drilled-out plates)

Posted: Fri Nov 05, 2004 1:36 pm
by MackDaddy
teutscher wrote:
MackDaddy wrote:I'm happy with my SRAM PC-99R hollow pin @ 256.5g (shortened by a few links from stock 114 pin OE length.) I ride 50*26 for the record.

I really wanted a PC-89R hollow pin, but got a great deal on the 99R hollow pin, and it works flawlessly. Best of all it only cost me ~ $28.00 shipped from Nashbar (using a 10% web coupon code.)

I'd like to try a PC-89R hollow pin in the future, as the stock weight is less than the PC-99R hollow pin to begin with. But again, the 99R HP is a fantastic chain... light, strong, cheap.

Jim


did you really mean 99R - is there really a roadversion of the pc99 (the R-versions have those funny drilled-out plates)


No, Ive got a PC-99R hollow pin. From what I can tell, it's designed for MB use and has slightly wider link plates (by .1mm) It has hollow pins, not plates.

Like I said, it works fine on my rig, and it didn't cost a grip!

Posted: Fri Nov 05, 2004 4:25 pm
by Dellucci
Hi it depends on witch bike you put it.For example I put the Ti. chain on my TCR composite and to short it about 7 links so after that it weights 240grs.If you use it with 114 links it´s a little heavier.......

Campy 10 Chain on Shimano 9

Posted: Fri Nov 05, 2004 6:02 pm
by tommasini
I'm running the hollowed out Campy 10 chain on my Shimano 9 speed mountain bike. Cog thickness is within .03mm so I had no concerns in that regard before I installed it. After installation I have had no noticiable shifting issues either.

Cut to 106 links it runs about 240 grams.

Re: wipperman ti chain

Posted: Fri Nov 05, 2004 6:40 pm
by bobalou
Mahoney wrote:what does it really weigh, 235 or 259, I know what is listed on this sight but its hard for me to believe a ti chain weighs about as much as a steel chain, any other weigh quotes other than the single sample reported on this page? theories? Because for my money the campy ultra drive ul @ 259 grams is a lot cheaper?

Brent


I've never tried this chain but have heard repeatedly that the lifespan is about 1000 kilometers. :(

That would mean premature chain stretch, which also will wear your cogs and rings faster. Not only are other chains about 10 times cheaper (and almost as light), they will last longer and wont require you to change any cogs too early. Try to save 20grams elsewhere, in other words!!

Posted: Fri Nov 05, 2004 7:54 pm
by Villadsen
I've never tried this chain but have heard repeatedly that the lifespan is about 1000 kilometers

Dont know where you have heard this, but it is defnitively not true. Perhaps you are mixing it up with that old all titanium Viking chain???

Posted: Fri Nov 05, 2004 8:50 pm
by bobalou
Villadsen wrote:
I've never tried this chain but have heard repeatedly that the lifespan is about 1000 kilometers

Dont know where you have heard this, but it is defnitively not true. Perhaps you are mixing it up with that old all titanium Viking chain???


I assume you're speaking from experience? If you're saying you can get a standard chain lifespan from this chain that will be the first time I've heard someone claim that. Not only have I heard a low lifespan for this chain I've heard they shift crappy too. Either way, can you justify spending $300 bucks for a chain that's about 20g lighter, if at all?

Posted: Sat Nov 06, 2004 12:05 am
by MackDaddy
bobalou wrote:Either way, can you justify spending $300 bucks for a chain that's about 20g lighter, if at all?


I know I won't. 8)

Posted: Sat Nov 06, 2004 12:03 pm
by Villadsen
I assume you're speaking from experience?

Yea, I do.
you're saying you can get a standard chain lifespan from this chain that will be the first time I've heard someone claim that

Well I do. How many did you talk to who actually has this chain? The main parts are made out of steel just like any other Wippermann. I cant see why it would last any shorter than an ordinary chain.
I've heard they shift crappy too
I shifts just as good as any other Wippermann chain.
Either way, can you justify spending $300 bucks for a chain that's about 20g lighter, if at all?

Read my first post a bit further up. Then you will know the answer.

Posted: Sat Nov 06, 2004 12:03 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Posted: Sat Nov 06, 2004 1:03 pm
by sharkman
2500 km so far and still not gone. Guess cleaning it properly is essential (weight is 247.3 in a 13-26 setup).
Guess lifespan is as good (or bad) as a normal Campa hollowpin chain.