Tillquist's kitchen!
Moderator: robbosmans
I agree that the Fetha adjustable mount is chunky, though they have slimmed it down a lot in their redesigns. The "chunky" mount is flat on the bottom to mount the junction box. The 14g Fetha mount is pretty cool looking though IMO. I used 3M trim tape from a body shop and the mount has stayed in place for 2 years
I found a Tillquist Di2 photo:
And the Fetha 14g mount:
I found a Tillquist Di2 photo:
And the Fetha 14g mount:
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
So, what do we think of this? http://www.f3cycling.com/products-for-cyclists (other than the fact that it's heavy)
Life's too short to ride clinchers.
Current:
Parlee Z-Zero ISP
Santa Cruz Stigmata CC
Past:
Ridley X-Fire Disc
Current:
Parlee Z-Zero ISP
Santa Cruz Stigmata CC
Past:
Ridley X-Fire Disc
- Stolichnaya
- Posts: 2621
- Joined: Wed Oct 06, 2004 6:55 pm
- Location: Vienna, AUT
F3: Seems like a good effort as they only need to produce one mount to fit a myriad of stem bolt spacing patterns.
There may be some compatibility if they designed it to take a number of different stem bolt diameter, in that a mount designed to take a larger diameter stem bolt may not seat properly against a stem faceplate that takes smaller bolts. (cough, Syntace, cough). However, it seems they did their homework and from the photos the mount appears to suit a number of trendy stem designs.
While you are not looking for weight comments it needs to be mentioned. I did not catch the weight on the site anywhere, but it does look portly. The design looks like it could be lightened up in a V 2.0 though. However, the added weight in V 1.0 may translate into a robust mount that can manage a lot of add-ons like camera, light, etc. without flexing too much.
But at that price point and weight, I can't see the reasoning to use this F3 over my current set up of a Tillquist Garmin mount (original design) on the stem and a simple Raceware GoPro band mount on the bar.
There may be some compatibility if they designed it to take a number of different stem bolt diameter, in that a mount designed to take a larger diameter stem bolt may not seat properly against a stem faceplate that takes smaller bolts. (cough, Syntace, cough). However, it seems they did their homework and from the photos the mount appears to suit a number of trendy stem designs.
While you are not looking for weight comments it needs to be mentioned. I did not catch the weight on the site anywhere, but it does look portly. The design looks like it could be lightened up in a V 2.0 though. However, the added weight in V 1.0 may translate into a robust mount that can manage a lot of add-ons like camera, light, etc. without flexing too much.
But at that price point and weight, I can't see the reasoning to use this F3 over my current set up of a Tillquist Garmin mount (original design) on the stem and a simple Raceware GoPro band mount on the bar.
-
- Posts: 39
- Joined: Mon Jan 23, 2017 11:24 am
- Location: Ghent Belgium
Is there a mount for deda 100 stem?
-
- Posts: 49
- Joined: Fri Nov 18, 2016 10:31 am
Loads of mounts back in stock on the website including the Ritchey c260 faceplate. Price just went up from 55eur to 70 though
Ordered a few days ago, looking forward to mounting up on my Ritchey carbon streem aerobar.
Ordered a few days ago, looking forward to mounting up on my Ritchey carbon streem aerobar.
Any chances of an mcfk mount?
Evo 4.9kg SL3 6.64kg Slice RS 8.89kg viewtopic.php?f=10&t=110579" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
A lots of New Garmin Edge Mount i stock today.
http://www.edge-mount.bike
Sent from my iPhone using Tapatalk
http://www.edge-mount.bike
Sent from my iPhone using Tapatalk
Last edited by Tillquist on Mon Jun 19, 2017 9:49 pm, edited 1 time in total.
See all my bike h e r e
Kumppa wrote:Would be nice if you would add weight information on your site.
Yes thats right.
But there is some weight info under the main picture on each mount
See all my bike h e r e
how is the Di2 junction box fitted under a Tillquist mount? i have the v.1 and v.2 mounts and still have to zip tie it to the neck of the mount.
- Factor Ostro VAM Disc
- Factor LS Disc
- Specialized Aethos Disc
- Sturdy Ti Allroad Disc
- Guru Praemio R Disc
- Factor LS Disc
- Specialized Aethos Disc
- Sturdy Ti Allroad Disc
- Guru Praemio R Disc
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com